Bring the most colourful 3D prints to life with the Anycubic Kobra 3 Combo. This 3D printer comes with the Anycubic Ace Pro, which allows you to 3D print with up to 4 colours or types of filament at the same time. The Anycubic Ace Pro will automatically switch between colours or spools, allowing you to also use two spools of the same colour as a backup for each other.
Intelligent
The smart algorithm helps the Anycubic Ace Pro load the right filament within a minute. To prevent the filament from becoming tangled, it is guided through 4 different tubes to the extruder. There is also a constant check to see whether the filament has run out. If this is the case, the screen will provide a real-time reminder, so there is less chance of your print failing. In addition, the algorithm measures the pressure in the nozzle for smooth extrusion, layer by layer. With just the push of a button you can use the vibration compensation. This will make your prints much smoother. The Kobra 3 Combo can also easily resume printing after a power failure or running out of filament.
User friendly
This 3D printer is very easy to set up and is suitable for both beginners and advanced users. Use the automatic bed levelling to always have a perfectly level print bed. You can easily operate the printer with the touchscreen, which you can also rotate 30˚ to 60˚ for extra comfort. The nozzle goes up to 300˚C, making it suitable for many different types of filaments. In addition, it can be replaced easily and without tools. The 32 bit MCU has a silence sensor to reduce noise to a maximum of 50dB. This means you will not be bothered by noise pollution during printing.
Other functionalities
The Kobra 3 has a sturdy frame that is suitable for long-term stable printing, even at high speeds. The stylish design ensures that this printer fits well in almost any interior. With a construction volume of no less than 250mm x 250mm x 260mm and a maximum printing speed of 600mm/s, you can easily make 3D prints of different sizes. The cooling fan spins up to 7,000 rpm, so your 3D models are cooled quickly. The filament can be dried during 3D printing, so it is always in optimal condition for printing. In addition, the filament is also kept dry when you are not printing. Finally, you can easily control your 3D printer via the Anycubic app (
Android &
iOS)
