Speed up the post-processing of your 3D prints by using the Wash & Cure 3 Plus from Anycubic. This Wash & Cure machine has a larger capacity than previous Anycubic Wash & Cure machines. It has a capacity of 7.6 litres and can wash and cure a 3D print of up to 228mm x 128mm x 260mm. 3D prints can be cleaned by placing it in the supplied basket or by hanging it from the top.
Higher quality
The design uses an innovative Flexicure light with a gooseneck, which increases the energy value by 30,000 W/cm². This results in improved curing in crucial areas, such as the top of your print and other hard-to-reach areas. The Wash & Cure 3 Plus uses a new setup, which cures 3D prints 20% more uniformly. This allows for more precise curing, resulting in greater consistency and higher quality.
Efficient & fast
The basket for holding your prints is made of double-layer PP and supports washing parts with the build plate. In addition, you will never have problems with rust on the basket, because this material is rust-free. The basket comes with two heights at which you can adjust: 150mm and 250mm. This allows the cleaning alcohol to be used more efficiently. The new two-layer curing platform also gives the option to cure a larger number of smaller 3D prints at once. This will speed up your 3D printing process significantly.
User friendly
Both washing and curing can be easily selected. The goose neck light can also be turned on or off with just one click. The washing and curing time can be set between 1 and 30 minutes. The design is designed to operate more quietly, creating a comfortable working environment.
