Simplify your resin printing finishing process with the complete Wash & Cure Max from Anycubic. Washing and curing your model will be streamlined, so you no longer have to do this manually. This Wash & Cure Max from Anycubic has a minimialist design and a beautiful white and grey finish, so it fits in with any interior.
Ideal capacity
This machine has an impressive cleaning capacity of 14.9 liters. The maximum size for 3D prints is 300 x 165 x 300, leaving plenty of room for cleaning and curing one or more of your resin 3D prints. It is also possible to place a complete model with the building plate in this machine.
Efficient
The Wash & Cure Max cleans by using the 'spray cleaning' method. Your print will then be exposed 360° on a rotating platform, so that all sides of your model are evenly cured. The cleaning alcohol is used efficiently, resulting in savings of more than 50%. Due to the cleaning method, your print will still be thoroughly cleaned, without using up much alcohol. (A 5 liter isopropyl bucket can clean up to 20 models)
Intelligent
The smart detection will identify problems and notify you. For example, this machine can register when you try to turn on the machine when the lid is open, no water is coming in or when the drain is not working properly and liquid remains in the bucket. This avoids any problems during post-processing.
