The Omega I60 from BCN3D is an industrial FFF 3D printer that is ideal for the shop floor. Easily print large and strong models, such as tools, jigs and fixtures. This printer uses BCN3D's signature IDEX technology, has a build volume of 450mm x 300mm x 450mm, a heated chamber, a temperature and humidity system and direct drive high speed extruders.
IDEX
Double your productivity thanks to the IDEX technology, which allows you to print with 2 extruders at the same time. You can use the duplication mode to produce 2 identical models or the mirror mode to make 2 mirrored prints. You can also print models with supports of different material, so that they can be removed more easily. The design is suitable for high speed printing. The printing speed can reach up to 300 mm/s.
Keep your filament dry
The integrated material module ensures a complete experience when using this printer. It allows you to control the humidity and temperature. This keeps your filaments dry, which has a major positive effect on the quality of the print. The temperature of this module can reach up to 70°C and the humidity is kept below 10%.
Actively heated print chamber
The active heated print chamber heats up to 70°C, an ideal temperature for materials such as ASA, PA, ABS and reinforced PA. It maintains a constant temperature during printing, which means there will be less tension and the model will be printed more evenly. Problems such as warping and tearing will be prevented. This way you can print large, robust parts with good mechanical qualities. The print bed can be heated up to 120°C. The 1.75mm direct drive Bondtech extruder is very powerful. In addition, it provides more control and precision and the nozzle is easy to change.
User-friendly & safe
The Omega I60 is very user-friendly. The flexible build plate ensures that you can easily remove models and with the built-in camera you can monitor your printing process. In addition, it has a 7 inch capacitive touchscreen and barcode sensors. You can easily connect this printer via wifi or ethernet. In addition, it is equipped with a HEPA and carbon filter. The current status of the printer can be read from the light signal. There is also a UPS (uninterruptible power supply) present, so that you do not experience any problems when the power fails. There is an emergency button to stop the printer.
