Filament 3D Printers

1 - 24 of 120

Elegoo Neptune 4 Pro 3D printer DKI00180

Description The Neptune 4 Pro 3D printer from Elegoo has the fantastic features of the Neptune 4 and more. The extra advantage of this printer is the build plate. In addition to the 11 x 11 auto bed leveling system, this printer has a smart heated bed consisting of segments. During slicing, the slicing software recognizes the size of the model that is going to be printed and activates a secondary heating zone when the model is larger than the heating zone in the center (120mm x 120mm). The two parts can also be switched on and off manually to regulate the temperature more precisely. In addition, the surface of the magnetic PEI sheet is marked.

The Neptune 4 Pro is specially designed for fast and efficient printing. The silent Klipper motherboard and the ARM 64/bit 1.5G frequency quad-core processor, which allows the maximum print speed to reach 500 mm per second, contribute to this. The nozzle can reach a temperature of 300C and supports printing with PLA, PETG, ABS, TPU and Nylon, among others. The extended hot end ensures consistent filament heating and faster extrusion. In addition to the 2 fans on the sides of the print head, which ensure good cooling, there are 4 fans behind the print head. These allow new layers to cool very quickly, even at high printing speeds. The new self-developed dual-gear direct extruder with a reduction ratio of 5.2:1 ensures powerful extrusion and smoother filament guidance.

Furthermore, you can still use functions such as previewing the model, pausing the print and resuming a print after a power outage. You simply send your model to the printer via USB or LAN and you can detach the 4.3'' touchscreen from the printer to operate it remotely. Improve the quality of your print in an instant by using the input shaping and/or pressure advance functions that this printer supports. With the Neptune 4 Pro you always have an optimal printing experience.

Specifications

Brand:	Elegoo	Heated bed included:	yes
Manual:	Download	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	ethernet	Heatbed max temp:	110 °C
Dimensions:	515 x 475 x 445 mm	Max print depth:	22.5 cm
Input voltage:	100-240V	Max print height:	26.5 cm
Power rating:	250 W	Max print volume:	13.4
Printer bed levelling:	semi-automatic	Max print width:	22.5 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00180
Has CNC option:	no	Weight:	11 kg
Filament sensor:	yes

€239.00

€194.31 Excl. 23% VAT

In stock

Anycubic Kobra S1 Combo 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600mm/s, you can create the coolest projects in no time. In addition, this 3D printer has handy functions that make it even easier for you. With this combo you also immediately receive the Ace Pro multi-material system.

Ace Pro
The Ace Pro allows you to use up to 4 colours or materials in one print. This allows you to easily create colourful 3D prints or prints with multiple materials. By connecting multiple Ace Pro units, you can even increase this number to 8 colours or materials. This unit also actively dries the filament during 3D printing, giving you 3D prints of the best possible result.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320˚C full metal hotend, a 120˚C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic leveling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odors.

Other functionalities
The 4.3 inch touchscreen has an intuitive UI, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	490 x 400 x 410 mm	Max print depth:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Nozzle diameter:	0.4 mm	Max print volume:	15.625
Power rating:	1,500 W	Max print width:	25 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	320 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	yes	Our item no:	DKI00319
Has CNC option:	no	Variant:	With ACE Pro
Filament sensor:	yes	Weight:	15.5 kg
Heated bed included:	yes

€459.00

€373.17 Excl. 23% VAT

€599.00 Anycubic3D rrp

In stock

Creality 3D K2 Combo 3D Printer

Zoom in

Description The Creality K2 Combo is a fast and compact CoreXY 3D printer with high-quality features for both demanding hobbyists and professional makers. With a print speed of up to 600mm/s, silent step-servo motors, a closed-loop design, and the Creality Filament System (CFS), this 3D printer offers excellent performance in a surprisingly compact size. With support for various filament types and automatic bed levelling, the K2 Combo is ready for modern printing challenges.

Key Features:

Building volume : 260mm × 260mm × 260mm
Print speed : up to 600mm/s
Hot end temperature : up to 300°C
CFS System: For multi-colour prints

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	573 x 445 x 477 mm	Max print depth:	26 cm
Input voltage:	100-240V	Max print height:	26 cm
Nozzle diameter:	0.4 mm	Max print volume:	16.95
Printer bed levelling:	automatic	Max print width:	26 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00370
Has CNC option:	no	Variant:	K2 Combo
Filament sensor:	yes	Weight:	23.7 kg
Heated bed included:	yes

€559.00

€454.47 Excl. 23% VAT

In stock

Prusa CORE One+ 3D printer kit

Zoom in

Description Build a fantastic 3D printer yourself with the Prusa CORE One 3D printer kit. This closed-housing CoreXY printer combines high speed, good quality and a large build volume of 250mm x 220mm x 270mm. The printer is ready for use within 10 minutes thanks to the advanced sensors. For example, the first layer is automatically calibrated and the print can be paused and a notification given when the filament runs out.

Easy to use
Get started with your new 3D printing project with just 1 click. The temperature in the closed housing can reach up to 55˚C, allowing for high-quality prints with materials such as PLA, PETG, ASA, PC Nylon and more. In addition, the robust Prusa CORE One has a full steel frame, high flow nozzle and input shaper. This also allows for high-speed printing with filament that is not high speed. The excellent dimensional accuracy ensures that 3D prints are of high quality and have sharp details. Thanks to the Nextruder with 360˚C cooling, even prints with a slope of 75˚ can be printed effortlessly.

Tip: in combination with the MMU3, this 3D printer allows you to print multiple colours simultaneously. This gives you even more creative freedom.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	555 x 415 x 444 mm	Max print depth:	22 cm
Input voltage:	230CV	Max print height:	27 cm
Nozzle diameter:	0.4 mm	Max print volume:	14.85
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:		Our item no:	DKI00349
Has CNC option:	no	Variant:	Kit
Filament sensor:	yes	Weight:	22.5 kg
Heated bed included:	yes

€1,049.00

€852.85 Excl. 23% VAT

In stock

Creality 3D K2 Pro Combo 3D Printer

Zoom in

Description The Creality K2 Pro Combo is an advanced, fully enclosed CoreXY 3D printer that excels in speed, stability, and material compatibility. With a generous build volume of 300mm × 300mm × 300mm and the Creality Filament System (CFS), this printer is ideal for creators who want to produce high-precision multicolour prints. Thanks to its sturdy aluminum frame, servo-step motors, and active heated print chamber, the K2 Pro delivers professional print results, even with demanding materials.

Key Features:

Building volume : 300mm × 300mm × 300mm
Print speed : CoreXY system with servo step motors
Hot end temperature : up to 300°C
CFS System: For multi-colour prints

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	110 °C
Dimensions:	850 x 505 x 445 mm	Max print depth:	30 cm
Input voltage:	100-240V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	27
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00372
Has CNC option:	no	Variant:	K2 Pro Combo
Filament sensor:	yes	Weight:	23.7 kg
Heated bed included:	yes

NOTE: The printer is shipped on a pallet.

€1,099.00

€893.50 Excl. 23% VAT

In stock

Elegoo OrangeStorm Giga 3D printer

Zoom in

Description Create super large 3D prints with the OrangeStorm Giga 3D printer from Elegoo. The impressive build volume of 800mm x 800mm x 1000mm offers enough space for creating very large prints or multiple medium-sized prints. The OrangeStorm Giga has a maximum print speed of 300mm/s, but it is recommended to print at 150mm/s.

Efficient & intelligent
The efficient heated bed consists of 4 independent build plates with PEI coating. The plates are all 410mm x 410mm and can heat up to a maximum temperature of 90˚C. The plates can be heated up simultaneously within 17 minutes, after which you can start making your 3D prints. It is also possible to heat the plates separately. The place where the model is located is automatically recognised and heated. If you want to make multiple 3D prints at the same time, it is possible to mount 3 additional print heads. This allows you to print with 4 nozzles at the same time, with the same or different colors and materials. The powerful double-sided cooling fans improve the quality of your 3D prints and stop after the print is completed thanks to the intelligent function. This saves energy and extends the life of the fans.

High quality
The OrangeStorm Giga has an elegant and timeless design. The linear x-axis and y-axis rails provide extra stability and an extended lifespan. Thanks to the improved z-axis rails, the 3D printer runs smoothly and the automatic bed leveling is accurate. The upgraded nozzle can handle a maximum temperature of 300˚C, which makes this 3D print suitable for printing various materials, such as PLA, PETG, TPU and Nylon. The 60 W ceramic heater and the chrome-zirconium-copper nozzle ensure smooth extrusion. The PID automatic calibration function of the nozzle provides even better control over the nozzle temperature. This 3D printer comes standard with a 0.6mm nozzle.

Other functionalities
You can easily control this 3D printer via the portable 7 inch HD touchscreen. Handy features such as filament detection and power loss recovery make it easier to make the perfect print.

Specifications

Brand:	Elegoo	Heated bed included:	yes
Manual:	Download	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	100 °C
Dimensions:	1,425 x 1,224 x 1,164 mm	Max print depth:	80 cm
Input voltage:	100-240V	Max print height:	100 cm
Nozzle diameter:	0.6 mm	Max print volume:	640
Printer bed levelling:	automatic	Max print width:	80 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00296
Has CNC option:	no	Weight:	104 kg
Filament sensor:	yes

€2,749.00

€2,234.96 Excl. 23% VAT

In stock

Creality 3D Ender-3 v3 SE 3D printer ⭐ Our choice for a budget plug & play printer

Creality 3D Ender-3 v3 SE 3D printer DKI00192

Zoom in

Description Open up a world of infinite creative possibilities with the Ender-3 V3 SE printer from Creality. Within 20 minutes you have assembled the printer and it is ready for use. With the easy auto bed-levelling system you can always start printing quickly. The CR Touch sensor easily levels the build plate and the tension sensor provides an automatic z-offset. The Ender-3 V3 SE is perfect for making all kinds of prints: from home accessories to gadgets, this printer can do it all and has a maximum print speed of 250mm per second.

The reliable 'Sprite' extruder of the Ender-3 V3 SE can handle many different materials, such as PLA, PETG and the flexible TPU. The filament is automatically loaded and unloaded for even more ease of use. With the 'extrude' function, the filament will flow smoothly from the nozzle. The 'retract' function will quickly retract the filament, after which you can remove and replace it effortlessly. Thanks to the sturdy double z-axis, the printer wobbles less. The 8mm thick y-axis shafts are designed to guide the build plate smoothly and last for a long time. Together these ensure that every print is printed perfectly. The printer is particularly easy to operate by means of the 3.2 inch colour display, which can be operated with the rotary knob. The UI uses motion graphics to display the leveling process, among other things. This way you can see at a glance what the printer is doing and what the progress is. Finally, the Ender-3 V3 SE has a stylish and compact design, making it perfect for any interior.

Specifications

Brand:	Creality 3D	Filament sensor:	no
Manual:	Download	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	490 x 364 x 364 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	Creality Spider / Ender-7	Max print volume:	12.1
Power rating:	350 W	Max print width:	22 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00192
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	7.12 kg

€169.00

€137.40 Excl. 23% VAT

In stock

Creality 3D Ender 3 V3 KE 3D printer

Zoom in

Description The Creality 3D Ender 3 V3 KE is one of the new printers from Creality. The printer has a compact design and is easy to assemble. Although it weighs little, it has the same functionalities as other printers. This gives you more freedom to get creative.

Make larger prints quickly
This printer has a Sprite Direct Drive extruder and can print super fast. With a maximum print speed of 500 mm/s, you can print a Benchy in no less than 15 minutes and 8 seconds. The build volume of 220mm x 220mm x 240mm gives you enough space to make larger prints.

Touchscreen operation
The Ender 3 V3 KE has a touchscreen with an intuitive UI. A smart self-test makes it possible to control the z-offset, auto levelling and more at the touch of a button. You also have a real-time preview of the model you are printing and vivid motion graphics showing the printing parameters.

Smart algorithms
The smart Creality operating system uses algorithms that ensure better quality of your print. For example, you can use the 'Input shaping' option, which reduces the vibration of the printer. You also have the option to use the 'motion advance' option, which optimizes the supply of filament. This ensures less ghosting and bumps.

Filaments at higher temperatures
This printer has a hot end with a 60W ceramic heater that can completely melt filaments for high-speed printing. This comes with a copper nozzle, allowing you to print at 300°C. This opens up a world of filaments you can print with, such as PLA, PETG, ABS and TPU.

Remote printing
Control and monitor the progress of your print wherever you are through LAN and Cloud printing. You can control your entire 3D printer via a WiFi network and your PC (Creality Print) or your smartphone (Creality Cloud APP, available for Apple and Android). If you own multiple printers, you can control them all online at the same time.

Other functionalities
The x-axis with linear rails ensure smooth movements and better precision. The cooling fans on two sides ensure super-fast cooling. This will cause the parts just printed to cool down quickly, which ensures a tight print.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Manual:	Download	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	490 x 364 x 364 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	24 cm
Nozzle type:	M6H23	Max print volume:	11.616
Power rating:	350 W	Max print width:	22 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00200
Camera included:	no	Weight:	7.12 kg
Has CNC option:	no

€239.00

€194.31 Excl. 23% VAT

In stock

Elegoo Neptune 4 Max 3D printer

Zoom in

Description Realise your grand 3D printing plans with the Elegoo Neptune 4 Max 3D printer. At 420mm x 420mm x 480mm, this printer has the largest construction volume within the Elegoo Neptune 4 family. The efficient cooling system, the auto bed levelling at 11 x 11 points and the magnetic PEI building plate make it even easier for you. You can transfer your files quickly and easily via WIFI, WLAN or USB.

Fast and accurate printing
The Neptune 4 Plus comes with the powerful Klipper firmware already installed, allowing your print speed to increase to 500mm/s. The ARM 64-bit 1.5 G quad-core processor also helps with this. The acceleration sensors on the x and y axes automatically calibrate and thus improve print quality. The dual-gear direct extruder ensures fast and precise extrusion, resulting in accurately printed models.

Different filaments
The nozzle heats up to 300℃. This also allows you to easily use materials that need to be printed at a higher temperature, such as ABS, TPU and Nylon. Using these materials gives you many more options for models and prints.

Specifications

Brand:	Elegoo	Heated bed included:	yes
Manual:	Download	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	80 °C
Dimensions:	740 x 658 x 632 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print height:	48 cm
Printer bed levelling:	semi-automatic	Max print volume:	84.672
Printer extruder:	direct	Max print width:	42 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00213
Filament sensor:	yes	Weight:	22.2 kg

€439.00

€356.91 Excl. 23% VAT

In stock

Original Prusa i3 MK3S+ 3D Printer KIT Self-assembly kit

Original Prusa i3 MK3S+ 3D Printer KIT DKI00229

Zoom in

Description The Original Prusa i3 MK3S+ is a powerful upgrade to the MK3S that features a SuperPINDA probe to improve the calibration of the first layer, as well as high-quality bearings and multiple design tweaks to improve usability.

Featuring a built-in filament sensor with a reliable trigger system, the MK3S+ knows when a filament strand has been inserted into the extruder. It’s also able to detect all filament types and colours, for added control and awareness of the printing process.

The helpful Power Loss Recovery feature ensures that the Original Prusa i3 MK3S+ fully recovers from power losses and continues printing from precisely where it stopped. It detects an interruption in the power supply and then shuts down the extruder heating and heatbed, finally saving the last known location, to prevent wasting your time and material.

High-temperature printing is supported with this powerful printer, with a maximum nozzle temperature of 300°C, as well as a maximum heatbed temperature of 120°C. These impressively high temperatures allow the Original Prusa i3 MK3S+ to support PLA, PETG, ASA filament and more.

Ensuring flexibility in terms of what you can print, the MK3S+ supports a build volume of 250mm x 210mm x 210mm, making it ideal for larger scale projects. Printing is fast and convenient thanks to the maximum travel speed of 200+ mm/s.

Please note: this product is a kit version of the Original Prusa i3 MK3S+ and requires assembly.

Perfect for schools, universities and all educational environments.

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	210 x 250 x 210 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	21 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	automatic	Max print volume:	11.025
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00229
Filament sensor:	yes	Weight:	7 kg

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

€757.00

€615.45 Excl. 23% VAT

In stock

Original Prusa i3 MK3S+ 3D Printer

Zoom in

Description The Original Prusa i3 MK3S+ 3D Printer is an upgraded version of the MK3S that features a SuperPINDA probe for better first-layer calibration. This printer supports a wide range of materials such as PLA, PETG, ASA, and more.

Thanks to the high-quality parts featured within this printer the MK3S+ can print objects in high quality up to 210mm whilst offering support for more flexible materials. This printer is capable of fully automatic mesh bed levelling ensuring any imperfections on the print sheet do not impact print quality.

The MK3S+ has useful features such as PowerLoss Recovery, which allows the printer to fully recover and resume in the case of power being lost and a filament sensor to detect different types and colours of filament.

With the Queit Noctua fan, this printer runs quietly.

Perfect for schools, universities and all educational environments.

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	210 x 250 x 210 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	21 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	automatic	Max print volume:	11.025
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00228
Filament sensor:	yes	Weight:	7 kg

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

€989.00

€804.07 Excl. 23% VAT

In stock

Original Prusa MK4S 3D Printer

Zoom in

Description Starting with 3D printing has never been easier! Take the printer out of the box, plug it in, let it run a quick Selftest, and start printing! No assembly required. With automatic calibration, always-perfect first layer, one-click printing and many other useful features, the MK4S is the best choice for your home, workshop, or company. All print profiles and configurations are in-house tested ensuring that the MK4S effortlessly delivers top-quality 3D prints at a press of a single button from the very start.

With an optional enclosure (available also in bundle with printer) and multi-material upgrade, you can expand your experience as you go, and print with advanced materials or create beautiful multi-coloured prints!

Build area: 250mm × 210mm × 220mm (WxDxH)
Layer height: 0.05mm - 0.30mm
1.75mm filaments: Not vendor-locked
0.4mm nozzle: Easy-to-swap
Removable print sheets
Open-source community-friendly

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	400 x 500 x 550 mm	Max print depth:	21 cm
Input voltage:	230CV	Max print height:	22 cm
Nozzle diameter:	0.4 mm	Max print volume:	11.55
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00287
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	7 kg
Heated bed included:	yes

€999.00

€812.20 Excl. 23% VAT

€1,095.00 Prusa rrp

In stock

Original Prusa CORE One 3D printer

Zoom in

Description The CORE One is a fully enclosed CoreXY 3D printer with active temperature control designed for top print quality and speed. Easy to set up and made to last, this rugged machine is perfect for beginners and professionals alike. Designed and manufactured in the EU.

Whether you're new to 3D printing or a seasoned expert, Prusa CORE One ticks all the boxes for a reliable all-around machine. Featuring an enclosed chamber and CoreXY design, it combines high-speed printing and maximum print quality with a large 250mm × 220mm × 270mm print area. And there are plenty of clever design choices, e.g., an all-steel exoskeleton frame for maximum firmness and robustness. You’ll be ready to print your first model in minutes thanks to intuitive software and one-click printing.

The CORE One is a 3D printing workhorse engineered in the proven Prusa tradition. Designed with a "made to last" philosophy and made from premium materials, the CORE One offers exceptional reliability with minimal maintenance. The enclosed chamber, capable of reaching up to 55°C, features active temperature control for high-quality printing across a wide range of materials from PLA and PETG (even with the door closed) to more demanding materials like ASA, PC, or Nylon.

Unpack the printer, perform a one-time calibration, and you’re ready to go. Equipped with advanced sensors for hassle-free printing, the CORE One is a true “start and forget” machine. Simply start your print and let the printer handle the rest, from fully automatic first-layer calibration to pausing the print and sending a notification if the filament runs out.

You can be sure that with our internally developed, quality-focused print profiles, your models will turn out exactly the way they were designed, with perfect dimensional accuracy. CORE One takes advantage of the upgraded Nextruder with 360° cooling that enables flawless printing of 75° overhangs, saving both time and material.

The chamber is as compact as possible, with a cleverly designed recess on each side to minimise its volume. This allows the chamber to quickly reach higher temperatures (up to 55°C), enabling you to print ASA, ABS, PC, PA (Nylons), and other advanced materials smoothly, without warping. The automatic ventilation system and active temperature control enable flawless printing of PLA - even with the door completely closed!

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	555 x 415 x 444 mm	Max print depth:	22 cm
Input voltage:	230CV	Max print height:	27 cm
Nozzle diameter:	0.4 mm	Max print volume:	14.85
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:		Our item no:	DKI00313
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	22.5 kg
Heated bed included:	yes

€1,349.00

€1,096.75 Excl. 23% VAT

In stock

Original Prusa MINI+ Semi-assembled 3D printer

Zoom in

Description

The Original Prusa MINI+ is a smart, compact and fast 3D printing workhorse, equipped with all the bells and whistles you've come to expect from an Original Prusa 3D printer. The MINI+ is bound to surprise you! With a print volume of 18cm (7") cubed, removable spring steel sheets, ethernet, and optional Wi-Fi, it is built on our custom-made 32-bit embedded platform featuring silent 2209 Trinamic drivers.

It’s packed with many of the features you can find in its larger siblings - super-fast printing thanks to Input Shaper and Pressure Advance, remote print management via Prusa Connect, OTA firmware updates, advanced safety features, and support for advanced materials - even PA-11 (280°C nozzle and 100°C heatbed). It’s open-source, easy to maintain, and open to mods, tweaking and tinkering.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	100 °C
Dimensions:	380 x 380 x 330 mm	Max print depth:	18 cm
Input voltage:	230CV	Max print height:	18 cm
Nozzle diameter:	0.4 mm	Max print volume:	5.832
Printer bed levelling:	automatic	Max print width:	18 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	280 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00312
Has CNC option:	no	Variant:	Semi-Assembled
Filament sensor:	no	Weight:	4.5 kg
Heated bed included:	yes

€509.50

€414.23 Excl. 23% VAT

In stock

Prusa CORE One L 3D printer

Zoom in

Description The Prusa CORE One L is a powerful, professionally designed enclosed CoreXY 3D printer with a generous 300mm × 300mm × 330mm build volume, suitable for production and workshop use. It offers high quality, material versatility, and minimal downtime thanks to factory calibration and plug-and-print convenience.

Key features:

Building volume: 300mm × 300mm × 330mm
Supported materials: from PLA/PETG to engineering materials such as ABS, ASA, Nylon and PC
Integrated heating of print bed and chamber, maintenance-friendly design

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	635 x 469 x 521 mm	Max print depth:	30 cm
Input voltage:	230CV	Max print height:	33 cm
Nozzle diameter:	0.4 mm	Max print volume:	29.7
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:		Our item no:	DKI00523
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	21.9 kg
Heated bed included:	yes

€1,699.00

€1,381.30 Excl. 23% VAT

In stock

Original Prusa XL Semi-Assembled, Single-toolhead 3D printer

Zoom in

Description With the Original Prusa XL you can easily make large 3D prints. This printer has a large construction volume of 360mm x 360mm x 360mm, so you no longer have to print large prints in multiple parts. The Original Prusa XL comes semi-assembled, so you have to partly assemble it yourself.

Possibility to expand
Easily expand this 3D printer with additional print heads to work with multiple colors and materials at the same time. You can connect up to 5 print heads at the same time and easily switch between them. Use multiple colors or print the supports with a soluble filament: endless possibilities.

Other functionalities
Thanks to the 32-bit MCU, input shaper and 'pressure advance', super-fast printing is possible. The Nextruder ensures that the first layer is always printed perfectly, even when printing with multiple print heads. This ensures you of a good basis for your 3D prints. For better quality and reliability during printing, this 3D printer has a modular, segmented heatbed. Because the 16 tiles of the heatbed can be controlled individually, the bed can be precisely adapted to your model. You can easily operate the Original XL 3D printer via the Prusa Connect network or offline.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00265
Has CNC option:	no	Variant:	Semi-Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Assembled

Semi-Assembled

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

€2,049.00

€1,665.85 Excl. 23% VAT

In stock

Original Prusa XL Assembled, Single-toolhead 3D printer

Zoom in

Description Create large, fantastic 3D prints with the Original XL 3D printer from Prusa. The Original Prusa XL has a construction volume of no less than 360mm x 360mm x 360mm, making it easy to make larger prints in one go. This printer comes fully assembled, so you no longer have to assemble it yourself and you can immediately start making 3D prints.

Possibility to expand
Would you like to work with multiple materials or colors in one print? Then you can expand this printer with additional print heads. Connect up to 5 print heads and easily switch between them. Use multiple colors or print your supports with a soluble filament: the possibilities are endless.

Other functionalities
The 32 bit MCU, input shaper and pressure advance ensure super-fast printing. In addition, the Nextruder ensures that a perfect first layer is always printed, even when working with multiple print heads. This ensures you have a good basis for your 3D prints. The modular segmented heatbed improves quality and reliability during printing. The 16 tiles of the heatbed can be controlled individually and thus precisely adapted to your model. You can easily operate the Original XL 3D printer via the Prusa Connect network or offline.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00264
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Assembled

Semi-Assembled

€2,349.00

€1,909.76 Excl. 23% VAT

In stock

Original Prusa XL Assembled 2-toolhead 3D Printer

Zoom in

Description The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36cm×36cm×36cm (14.17''×14.17''×14.17'') and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00277
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Assembled

Semi-Assembled

€3,149.00

€2,560.16 Excl. 23% VAT

In stock

Original Prusa XL Assembled 5-toolhead 3D Printer

Zoom in

Description

Introducing the Original Prusa XL Assembled 5-toolhead 3D Printer, the ultimate solution for multi-material and multi-color 3D printing. Fully assembled and ready to use right out of the box, this advanced printer features five independent toolheads, enabling complex and precise prints with ease. Its large build volume and top-tier components ensure exceptional print quality and reliability, making it perfect for both professional and enthusiast applications. Experience the convenience of a pre-assembled machine combined with the innovation and performance that Prusa is renowned for. Transform your 3D printing projects with the Original Prusa XL’s cutting-edge technology and superior craftsmanship.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	5
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00274
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Assembled

Semi-Assembled

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

€3,999.00

€3,251.22 Excl. 23% VAT

In stock

Anycubic Kobra S1 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600mm/s, you can create the coolest projects in no time. In addition, this 3D printer has handy functions that make it even easier for you.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320˚C full metal hotend, a 120˚C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic leveling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odors.

Other functionalities
The 4.3 inch touchscreen has an intuitive UI, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	490 x 400 x 410 mm	Max print depth:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Nozzle diameter:	0.4 mm	Max print volume:	15.625
Power rating:	1,500 W	Max print width:	25 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	320 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	yes	Our item no:	DKI00318
Has CNC option:	no	Variant:	Without ACE Pro
Filament sensor:	yes	Weight:	15.5 kg
Heated bed included:	yes

€349.00

€283.74 Excl. 23% VAT

EU warehouse

Creality Hi Combo 3D printer

Zoom in

Description Create the most colourful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500mm/s and a maximum acceleration of 12,000mm/s², allowing you to print in no time. With this combo you not only get the printer, but also a CFS, with which you can print up to 4 colours simultaneously.

Multi material system
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed levelling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralises vibrations, so you can quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has a full metal design that is cast from an aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors whether the filament is broken or empty. If there is still a spool of the same filament available in the CFS, it will automatically be switched to this.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	47.7 x 40.9 x 39.2 cm	Max print depth:	26 cm
Input voltage:	110-220V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	20.28
Printer bed levelling:	automatic	Max print width:	26 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00323
Has CNC option:	no	Variant:	With CFS
Filament sensor:	yes	Weight:	11.31 kg
Heated bed included:	yes

€369.00

€300.00 Excl. 23% VAT

EU warehouse

Creality 3D Ender 3 V3 Plus

Zoom in

Description Bring your creative ideas to life with the Ender 3 V3 Plus 3D printer from Creality. With the large construction volume of 300mm x 300mm x 330mm you can print life-size objects in one go or print several small objects in one go. It is also possible to print up to 600mm/s with the CoreXZ system. You can easily assemble the printer, making it easy to use even for novice users. Thanks to the automatic calibration, your build plate is always perfectly level, without having to put in any extra effort yourself.

Powerful and stable performance
The Ender 3 V3 Plus delivers fantastic performance due to its reliable and robust clog-free extruder. The printer has a simple quick swap tri-metal nozzle, so you can change it easily and quickly. In addition, the 60W hotend heater ensures smooth extrusion at full power. The part cooling fans at the front and back cool the newly printed part quickly and evenly, making dripping and deformation a thing of the past. Thanks to the two powerful motors on the y-axis, the print bed is moved quickly and stably, even when larger and heavier 3D prints are made. The z-axis has 2 supporting beams on the side, making it less vibrating and very accurate. Easily print different materials such as PLA, ABS, PETG, PLA-CF and the flexible TPU (95A).

User friendly
The new metal design is very stable and takes up significantly less space than other printers with the same build volume. This makes this printer a perfect fit for almost any setup. The Ender 3 V3 Plus has two different speed modes, including a silent mode with a noise level of ≤55 decibels. The handy 800px x 480px touchscreen shows you all the information you need, such as a preview of the model and its progress. The flexible, textured build plate ensures that 3D models remain in place during printing and that they can be easily removed afterwards. Finally, you can easily connect the printer to a LAN connection or WiFi.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Manual:	Download	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	577 x 410 x 445 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Nozzle type:	M6H23	Max print volume:	27
Power rating:	350 W	Max print width:	30 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00258
Camera included:	no	Weight:	11.5 kg
Has CNC option:	no

€399.00

€324.39 Excl. 23% VAT

€519.00 Creality3D rrp

EU warehouse

Anycubic Kobra 3 Max 3D printer

Zoom in

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420mm x 420mm x 500mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600mm/s and an acceleration of 10,000mm/s², you never have to wait long for your 3D prints to be ready.

User friendly
The LeviQ 3.0 automatic leveling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolour 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can continue your 3D print after a power failure, so it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60˚C. The hotend can heat up to a temperature of 300˚C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	90 °C
Dimensions:	753 x 706 x 640 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print height:	50 cm
Nozzle diameter:	0.4 mm	Max print volume:	88.2
Power rating:	300 W	Max print width:	42 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	no	Our item no:	DKI00315
Has CNC option:	no	Variant:	Without ACE Pro
Filament sensor:	yes	Weight:	19 kg
Heated bed included:	yes

€459.00

€373.17 Excl. 23% VAT

EU warehouse

Anycubic Kobra 3 Max Combo 3D printer

Zoom in

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420mm x 420mm x 500mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600mm/s and an acceleration of 10,000mm/s², you never have to wait long for your 3D prints to be ready. This combo also comes with an Ace Pro multi-material system.

Ace Pro
Thanks to the Ace Pro, you can 3D print with 4 colours or materials at the same time. By connecting an extra unit, this number can even be increased to 8. Changing spools will be fully automatic, allowing you to spend time on other things. The intelligent drying function of the Ace Pro makes it possible to dry filament, both before and during printing. This will make your 3D prints of even higher quality. In addition, the Ace Pro can automatically switch to a new spool of the same colour when the old one is empty and the printing is paused when blockages or filament tangles are detected.

User friendly
The LeviQ 3.0 automatic levelling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolour 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can resume your 3D print after a power failure, so that it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60˚C. The hotend can heat up to a temperature of 300˚C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	90 °C
Dimensions:	753 x 706 x 640 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print height:	50 cm
Nozzle diameter:	0.4 mm	Max print volume:	88.2
Power rating:	300 W	Max print width:	42 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	no	Our item no:	DKI00316
Has CNC option:	no	Variant:	With ACE Pro
Filament sensor:	yes	Weight:	23.6 kg
Heated bed included:	yes

€599.00

€486.99 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00

Filament 3D Printers

Popular products