Introducing the new Flashforge Creator 3 Pro: the second generation with additional optimisations! This allows you to print even more effectively and professionally.
The most important upgrades
- Optimised extruder for better results with technical filaments.
- Upgraded movement system for a more accurate printing result.
- Refined levelling sensors for more accurate print positions.
- Improved print bed that is flexible and heats up at lightning speed.
Dual extruders
The Flashforge Creator 3 Pro has two independent print heads. This allows you to simultaneously print two different objects or with two different materials, such as
PLA and
PVA . The wind speed of the dual fans on the renewed extruders can be controlled, so that prints with technical filament get a better quality. The nozzle and heating element are integrated and work perfectly together. The improved sensors also ensure a more accurate print position.
The maximum temperature of the extruders has been increased to 320°C. The printer comes with a standard 0.4mm nozzle, but you can swap it with a 0.6 or 0.8mm nozzle.
Heated bed
The renewed heated bed heats up to 110° C in just 3 minutes! The maximum temperature is 120° C. The flexible print bed makes it easy to remove printed objects. The bed also has a built-in magnet, so you can easily attach it to and remove it from the platform. You can adjust the bed and the two print heads automatically via the 4.3 inch touchscreen.
Other specifications
You can connect the printer via USB, Wi-Fi or Ethernet. With the built-in camera you can monitor the progress of the prints in real-time. Is the printer connected to Wi-Fi or Ethernet? Then you can even monitor this from anywhere. The printer has sensors that detect the filament and give a warning when the filament has run out. In addition, it also includes a HEPA13 air filter and 8 GB of internal storage. Flashforge's
FlashPrint software is included as standard, but you can also use other well-known slicing software.
