With the Phaetus x Voron Hotend ST Print your designs with a higher resolution. The hotend has an ultra-thin wall thickness of 0.1mm, which ensures optimum thermal insulation. The integral frame allows you to easily change the nozzle without touching the heatblock. The Phaetus x Voron Hotend ST has a support structure that keeps it intact under external force. The inside of the nozzle and the heat break has a rough inside. This causes the filament to move more evenly, resulting in higher resolution prints. Due to the copper alloy, the hotend heats up faster and there is better heat dissipation. You can use this hotend when printing up to 500 degrees.