Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D red PLA filament 1.75mm, 1.1kg DFP01069

2
1
0

Description Our red 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	RAL colour no:	3020
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no
Our item no:	DFP01069

Order now, we can ship this today!

€24.50 20% discount:

€19.60 (Incl. 23% VAT)
(€15.93 Excl. 23% VAT)

in stock

123-3D red High Speed PLA filament 1.75mm, 1.1kg

Zoom in

2
1
0

Description This red 1.75mm High Speed PLA is ideal for use in combination with your High Speed printer. With this filament you can reach a speed of up to 600mm/s, which is considerably faster than most high speed filaments (which only go up to 300mm/s). High Speed PLA from 123-3D will significantly speed up your 3D printing process, without sacrificing the high quality you have come to expect from us.

Specifications

Hazard class:	N/A	Our item no:	DFP01186
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-65 °C	Spool width:	6.8 cm
Material:	PLA High Speed	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	215-240 °C	Is liquid:	no

Order now, we can ship this today!

€27.50 20% discount:

€22.00 (Incl. 23% VAT)
(€17.89 Excl. 23% VAT)

in stock

123-3D red PLA filament 1.75mm, 3kg

Zoom in

2
1
0

Description Our red 1.75mm PLA filament has been improved! It has an improved composition and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01070
Amount:	3 kg	RAL colour no:	3020
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	55-75 °C	Spool width:	10.0 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this today!

€49.50 20% discount:

€39.60 (Incl. 23% VAT)
(€32.20 Excl. 23% VAT)

in stock

123-3D BK/W/R/Y/DB PLA filament bundle 1.75mm, 1.1kg Total 5.5kg of filament!

123-3D BK/W/R/Y/DB PLA filament bundle 1.75mm, 1.1kg DFE00053

Zoom in

Description The 123-3D own-brand PLA starter pack consists of the 5 most popular standard colours of our new improved 123-3D filament. 123-3D filaments guarantee quality, reliability and good performance.

The colours in our package are: black, white, red, yellow and dark blue.

Normally €122.50, now only €98 !!

Specifications

Hazard class:	N/A	Our item no:	DFE00053
Amount:	5.5 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	multi colour	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	195-235

Order now, we can ship this today!

€122.50 20% discount:

€98.00 (Incl. 23% VAT)
(€79.67 Excl. 23% VAT)

in stock

123-3D chameleon red-silver PLA filament 1.75mm, 1kg

Zoom in

Description The multicoloured chameleon 1.75mm PLA filament from 123-3D.ie has a beautiful shine. The most special thing about this filament is the unique colour change. Be enchanted by this beautiful red-silver chameleon filament and print extra striking 3D designs with it!

This PLA filament is stronger and is less brittle than standard PLA. In addition, it has all the advantages of PLA: it is biodegradable, does not warp, does not deform and leaveslittle odour during 3D printing. A heated bed is not necessary.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP11070
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red silver	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	205-230

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€34.50 (coming soon) (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

123-3D red PLA filament bundle 1.75mm, 8.8kg

Zoom in

Description The 123-3D own-brand PLA bundle pack (Jupiter series) consists of 8 x 1.1kg spools of our new improved red 123-3D filament. 123-3D filaments guarantee quality, reliability and good performance. Total 8.8kg.

Normally €196, now only €156.80 !!

Specifications

Hazard class:	N/A	Our item no:	DFE00061
Amount:	8.8 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	6.8 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-215 °C	Is liquid:	no

Order now, we can ship this today!

€196.00 20% discount:

€156.80 (Incl. 23% VAT)
(€127.48 Excl. 23% VAT)

in stock

REAL dark red PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description The dark red PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-225 °C
Amount:	0.5 kg	Our item no:	DFP02151
Brand:	REAL	Roundness:	above 95 percent
Colour:	dark red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

5-7 day delivery

REAL dark red PLA Matte filament 1.75mm, 1kg

Zoom in

Description The dark red PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-225 °C
Amount:	1 kg	Our item no:	DFP02160
Brand:	REAL	Roundness:	above 95 percent
Colour:	dark red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

REAL red PLA filament 1.75mm, 0.5kg

Zoom in

Description The red REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02069
Amount:	0.5 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL red PLA filament 1.75mm, 1kg

Zoom in

Description The red REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, whereby details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02003
Amount:	1 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL red PLA Pro filament 1.75mm, 1kg

Zoom in

Description The red PLA Pro is a premium filament (1.75mm) that combines some of the best qualities of PLA and ABS. 3D printing with PLA Pro is as easy as printing with PLA, but delivers results with the mechanical qualities of ABS. With PLA Pro you can print objects with a matte finish, making individual layers less noticeable. Compared to PLA, PLA Pro is much more resistant to high temperatures.

Specifications

Hazard class:	N/A	Our item no:	DFP02130
Amount:	1 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50-60 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA Pro	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	215-245 °C

Order now, we can ship this today!

€45.50 (Incl. 23% VAT)
(€36.99 Excl. 23% VAT)

in stock

REAL red PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This red PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, with this ultra-strong PLA, you have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP12031
Amount:	1 kg	RAL colour no:	3011
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL red PLA Tough filament 1.75mm, 0.5kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-220 °C
Amount:	0.5 kg	Our item no:	DFP12023
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA tough	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

in stock

REAL red PLA Tough filament 1.75mm, 1kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60 and 80°C.

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-220 °C
Amount:	1 kg	Our item no:	DFP12010
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA tough	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€45.50 (coming soon) (Incl. 23% VAT)
(€36.99 Excl. 23% VAT)

REAL satin scarlet PLA filament 1.75mm, 0.5kg

Zoom in

Description The scarlet red satin REAL PLA filament (1.75mm) has a beautiful satin sheen and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	0.5 kg	Our item no:	DFP02195
Brand:	REAL	Roundness:	above 95 percent
Colour:	satin scarlet	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

in stock

REAL sparkle ruby red PLA filament 1.75mm, 0.5kg

Zoom in

Description For 3D prints with a sparkling effect, choose our ruby red PLA filament with glitter!

Create striking 3D prints with this unique filament and determine the colour intensity yourself by varying the wall thickness; the thicker the wall, the more beautiful the shiny glitter effect. In addition, this beautiful filament is slightly stronger than standard PLA, making it suitable for a wide variety of objects.

The glitter PLA filament has a diameter of 1.75mm and an ideal print temperature between 180°C and 230°C. It is very easy to use, biodegradable and does not require a heated bed to print. It is recommended to clean the nozzle of the nozzle after use with cleaning filament. Store the glitter PLA filament in a cool and dry place and do not leave it in the sun.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	0.5 kg	Our item no:	DFP02099
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

in stock

BASF Ultrafuse red PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is red and suitable for 3D printing all kinds of creative designs. he perfect round shapeensures this PLA filament does not easily get stuck in the printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFB00118
Amount:	0.75 kg	RAL colour no:	3020
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	210-220 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

colorFabb red LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour red has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13024
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW PLA	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

5-7 day delivery

colorFabb red PLA Economy filament 1.75mm, 2.2kg

Zoom in

Description This red colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13100
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	0-60 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PLA economy	Is liquid:	no

€43.50 (Incl. 23% VAT)
(€35.37 Excl. 23% VAT)

5-7 day delivery

colorFabb transparent red PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in transparent red. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. You can create striking prints with this transparent red color. This filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13112
Colour:	transparent red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PLA matte	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

colorFabb traffic red PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Print quality 3D objects with ease with the colorFabb PLA/PHA filament in traffic red. PLA/PHA consists of a mix of bioplastics and is recyclable. It is strong and is less brittle than other filaments. The beautiful red colour ensures fantastic prints. This filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13144
Colour:	traffic red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PLA matte	Is liquid:	no

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

5-7 day delivery

colorFabb red brick Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder is added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour 'red brick' has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Nozzle temp range:	195-220 °C
Amount:	0.7 kg	Our item no:	DFP13235
Brand:	colorFabb	Inner diameter:	Ø 5.2 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.5 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	50-60 °C	Packing group:	NO
Material:	stone fill	Is liquid:	no
Max deviation:	+mn ± 0.05 mm

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

Dremel red PLA filament 1.75mm, 0.75kg

Zoom in

Description Create detailed 3D prints with a high-quality finish with this red PLA filament from Dremel.

This biodegradable PLA filament is an extremely popular and user-friendly filament type. Ideal for producing visually appealing 3D objects that require little force. In addition, this filament also has a slightly higher print temperature (220°C) than regular PLA and an optimal bed temperature of 35°C. With a diameter of 1.75mm it is compatible with almost all 3D printers.

In addition, the coil is equipped with an RFID chip, so that your Dremel printer automatically uses the correct settings. The perfect material for beginners and experts!

Specifications

Hazard class:	N/A	Our item no:	DCP00180
Amount:	0.75 kg	Inner diameter:	Ø 1.9 cm
Brand:	Dremel	Outer diameter:	Ø 18.0 cm
Colour:	red	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	200-240 °C

€41.50 (Incl. 23% VAT)
(€33.74 Excl. 23% VAT)

5-7 day delivery

eSun red-blue ePLA-Silk Magic filament 1.75mm, 1kg

Zoom in

Description Create a dreamy effect with the two-colour red-blue ePLA-Silk Magic filament from eSun. The filament changes colour when viewed from a different angle. This gives your prints a surprising and playful effect. Compared to other materials, ePLA Silk Magic is easier to remove. In addition, it gives the print a smooth appearance. This Magic PLA filament is an upgrade from standard PLA and can therefore be printed very easily.

Dreamy two-tone effect
Silky, shiny texture
Slippery surface
Easy to remove
Easy to print
Not easy to break

Specifications

Hazard class:	N/A	Our item no:	DFE20223
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	-	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	45-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€28.00 (Incl. 23% VAT)
(€22.76 Excl. 23% VAT)

5-7 day delivery

eSun eSilk hyacinth red PLA filament 1.75mm, 1kg

Zoom in

Description eSun's hyacinth red eSilk PLA filament has a glossy and satin texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20198
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	red	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PLA ESILK	Is liquid:	no
Nozzle temp range:	190-220 °C

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

5-7 day delivery

eSun eSilk red PLA filament 1.75mm, 1kg

Zoom in

Description eSun's red eSilk PLA filament has a glossy and silky-gloss texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20202
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	red	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PLA ESILK	Is liquid:	no
Nozzle temp range:	190-220 °C

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

5-7 day delivery

eSun glass watermelon PLA filament 1.75mm, 1kg

Zoom in

Description eSun's glass watermelon PLA from eSun is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA has a high stiffness and strength and is therefore comparable to PC. In addition, it has a low shrinkage, does not warp and does not tear. Use PLA filament for prototyping, concept models and casting metal parts. This eSun PLA filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20068
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	watermelon glass	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	180-210 °C

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

eSun fire engine red PLA+ filament 1.75mm, 1kg (Re-fill)

Description With the fire truck red PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's blue filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Material:	PLA matte
Amount:	1 kg	Nozzle temp range:	210-230 °C
Brand:	eSun	Our item no:	DFE20282
Colour:	-	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Heated bed temp:	45-60 °C	Is liquid:	no

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

5-7 day delivery

eSun red PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's red filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-210 °C
Amount:	1 kg	Our item no:	DFE20116
Brand:	eSun	Inner diameter:	Ø 9.0 cm
Colour:	red	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA matte	Is liquid:	no

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

5-7 day delivery

eSun red PLA+ filament 1.75mm, 1kg

Zoom in

Description eSun's red PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20101
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	red	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA matte	Is liquid:	no
Nozzle temp range:	190-210 °C

Order now, we can ship this today!

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

in stock

Polymaker PolyLite sunset gold-red Dual Silk PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker's Sunset Gold-Red PolyLite Dual Silk PLA has an amazing, two-tone, silky gloss effect. The colour of your print seems to change from Gold to Red when you look at it from a different angle. In addition, this filament is very easy to use and environmentally friendly. Perfect for creating decorative prints.

Specifications

Hazard class:	N/A	Our item no:	DFP14338
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite red PLA filament 1.75 mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a bright red colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190 to 230°C. We recommend a temperature between 25 and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14072
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	40-60 mm/s	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this today!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite red PLA filament 1.75mm, 3kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a bright red colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, down to the last detail. PLA filament is harder and glossier than ABS. The ideal printing temperature is 190 to 230°C. We recommend a temperature between 25 and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14312
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	red	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	40-60 mm/s	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€82.50 (Incl. 23% VAT)
(€67.07 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite dark red Galaxy PLA filament 1.75mm, 1kg

Zoom in

Description PolyLite Galaxy PLA gives your prints a special galaxy look. This filament is therefore perfect for the prints that you want to give that little bit extra. The dark red filament makes the glitter pop even more, making the print sparkle beautifully from every angle. Besides looking good visually, this filament also has excellent properties. For example, the environmentally friendly PolyLite PLA is of high quality and specially designed for easy printing. The Polymaker Jam-Free technology ensures that the heat resistance of the filament is increased to 140°C. This makes all problems of irregular heating of filament during printing a thing of the past. The heat resistance of the print remains the same as with other PLA.

Specifications

Hazard class:	N/A	Our item no:	DFP14317
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	dark red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

Order now, we can ship this today!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite red PLA Pro filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite red PLA Pro filament is of high-quality in toughness, stiffness and impact resistance. The filament offers technical properties and is just as easy to print as standard PLA. This Polymaker PLA Pro filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14255
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	30-60 °C	Packing group:	NO
Material:	PLA Pro	Is liquid:	no
Nozzle temp range:	190-220 °C

Order now, we can ship this today!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

Polymaker PolyLite red Silk PLA filament 1.75mm, 1kg

Zoom in

Description Print your designs with a glossy effect with the red PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. As a result, the separate print layers on the side surfaces are less visible, resulting in a smooth surface.

Specifications

Hazard class:	N/A	Our item no:	DFP14324
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyMax red PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright red colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190 to 230°C. For best results, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14108
Amount:	0.75 kg	Spool empty weight:	± 125 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	4.5 cm
Filament print speed:	40-60 mm/s	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra army red PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. The extra smooth PolyTerra filament in the colour 'Army Red' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14345
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this today!

€23.00 (Incl. 23% VAT)
(€18.70 Excl. 23% VAT)

in stock

Polymaker PolyTerra lava red PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Lava Red' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14158
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	lava red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

Polymaker PolyTerra lava red PLA filament 1.75mm, 3kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. The extra smooth PolyTerra filament in the colour 'Lava Red' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14355
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	lava red	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€64.50 (Incl. 23% VAT)
(€52.44 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra muted red PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. The extra smooth PolyTerra filament in the colour 'Muted Red' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14346
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€23.00 (Incl. 23% VAT)
(€18.70 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra red PLA+ filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA+ filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. PLA+ filament is also optimized for better layer adhesion. The PolyTerra filament in the colour 'red' has a silky smooth finish and is partly of natural origin. Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14246
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA matte	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this today!

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

in stock

XYZprinting antibacterial red PLA filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description XYZprinting's antibacterial PLA filament is specially designed to reduce the spread of germs and infections. Thanks to the presence of silver ions, bacterial growth is inhibited by as much as 99%. In addition, the material complies with the RoHS directive, making it ideal for use by families with children and in schools.

The red filament comes on an NFC spool. As a result, your printer immediately recognises which filament type it is.

Specifications

Hazard class:	N/A	Our item no:	DFP05044
Amount:	0.6 kg	Inner diameter:	Ø 5.0 cm
Brand:	XYZprinting	Outer diameter:	Ø 16.8 cm
Colour:	red	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	PLA antibacterial	Is liquid:	no
Nozzle temp range:	195-215 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.50 (coming soon) (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

XYZprinting transparent red PLA filament 1.75mm, 0.6kg (Refill)

Zoom in

Description With this red XYZprinting PLA filament you can easily print all kinds of objects. The filament is equipped with the XYZ chip so that it integrates perfectly with the following XYZ da Vinci printers:

da Vinci 1.0A
da Vinci 2.0A Duo
da Vinci 1.0 AiO

Supplied without cartridge. See the manual for replacing the coil here.

NB:
this filament does not work on the da Vinci Junior and Mini. Click here for the Junior and Mini filament.

Specifications

Hazard class:	N/A	Our item no:	DFP05019
Amount:	0.6 kg	Inner diameter:	Ø 5.0 cm
Brand:	XYZprinting	Outer diameter:	Ø 16.8 cm
Colour:	red	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	195-215 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.50 (coming soon) (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

123-3D red PLA glitter filament 1.75mm, 1.1kg

Zoom in

2
1
0

Description Go for a 'stunning' effect with red PLA glitter filament. This filament ensures that you can create unique prints. It is slightly stronger than normal PLA, so you can use it for many different prints. In addition, it still has the nice properties of PLA. It is easy to use and biodegradable. This filament has a diameter of 1.75mm and there is 1.1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01130
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA glitter	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this today!

€28.50 20% discount:

€22.80 (Incl. 23% VAT)
(€18.54 Excl. 23% VAT)

in stock

Polymaker PolySonic red PLA filament 1.75mm, 1kg

Zoom in

Description PolySonic PLA filament from Polymaker is a real game changer in the world of 3D printing. This filament can be printed at very high speed without sacrificing quality. The fast extrusion, high precision and excellent layer adhesion allow you to get maximum benefit from your high-speed printer. Discover PolySonic PLA red now and reduce your printing time without losing strength or quality.

Specifications

Hazard class:	N/A	Our item no:	DFP14379
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	210-230 °C

Order now, we can ship this today!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

REAL red PLA filament 1.75mm, 0.5kg

Zoom in

Description The red REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing of a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, which also shows off details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly type of plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02253
Amount:	0.5 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	7.0 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	190-215 °C	Is liquid:	no

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

5-7 day delivery

REAL red PLA Tough filament 1.75mm, 1kg

Zoom in

2
1
0

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is exerted on the printed object. This includes tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you have virtually no problems with warping (warping of the print). For the best results, print with a heated bed at a temperature between 60 and 80°C.

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Hazard class:	N/A	Our item no:	DFP02390
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	60-80 °C	Tunnel code:	N/A
Material:	PLA tough	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

€45.50 (Incl. 23% VAT)
(€36.99 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra Dual shadow red (black-red) PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Shadow Red colour is red on one side and black on the other. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14383
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

Order now, we can ship this today!

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

in stock

Polymaker PolyTerra Dual Flamingo (pink-red) PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The colour Flamingo is pink on one side and red on the other. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14388
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra Dual Sunrise (red-yellow) PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Sunrise colour is red on one side and yellow on the other. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14390
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra Dual Mixed Berries (red-dark blue) PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Mixed Berries colour is red on one side and dark blue on the other. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14392
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

Order now, we can ship this today!

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

in stock

123-3D BK/W/DB/N/R/Y/GRY/O PLA filament bundle 1.75mm, 8.8kg Total 8.8kg of filament!

123-3D BK/W/DB/N/R/Y/GRY/O PLA filament bundle 1.75mm, 8.8kg DFE00063

Zoom in

Description Our PLA filament bundle consists of the 8 most popular colours of our new improved 123-3D filament. This filament bundle is designed with affordability in mind, suitable for any maker from beginner to advanced. Thanks to the high quality, the 123-3D PLA filament is less brittle and the filament has a better hardness than standard PLA.

This bundle contains:

1 x 123-3D black PLA filament 1.75mm, 1.1kg
1 x 123-3D white PLA filament 1.75mm, 1.1kg
1 x 123-3D dark blue PLA filament 1.75mm, 1.1kg
1 x 123-3D neutral PLA filament 1.75mm, 1.1kg
1 x 123-3D red PLA filament 1.75mm, 1.1kg
1 x 123-3D yellow PLA filament 1.75mm, 1.1kg
1 x 123-3D grey PLA filament 1.75mm, 1.1kg
1 x 123-3D orange PLA filament 1.75mm, 1.1kg

Normally €196, now only €156.80 !!

Specifications

Hazard class:	N/A	Our item no:	DFE00063
Amount:	8.8 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	multi colour	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	195-235

Order now, we can ship this today!

€196.00 20% discount:

€156.80 (Incl. 23% VAT)
(€127.48 Excl. 23% VAT)

in stock

REAL red PLA filament 1.75mm, 3kg

Zoom in

2
1
0

Description The red REAL PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02255
Amount:	3 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-55 °C	Spool width:	10.5 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	190-215 °C	Is liquid:	no

Order now, we can ship this today!

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

in stock

REAL scarlet-red satin PLA Tough filament 1.75mm, 0.5kg

Zoom in

2
1
0

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is exerted on the printed object. This includes tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you have virtually no problems with warping (warping of the print). For the best results, print with a heated bed at a temperature between 60 and 80°C.

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Hazard class:	N/A	Our item no:	DFP02342
Amount:	0.5 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	satin scarlet	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	0-50 °C	Tunnel code:	N/A
Material:	PLA S	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

5-7 day delivery

REAL red PLA Tough filament 1.75mm, 0.5kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is exerted on the printed object. This includes tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you have virtually no problems with warping (warping of the print). For the best results, print with a heated bed at a temperature between 60 and 80°C.

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Hazard class:	N/A	Our item no:	DFP02389
Amount:	0.5 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	60-80 °C	Tunnel code:	N/A
Material:	PLA tough	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

5-7 day delivery

MatX traffic red AMBX-PLA Antimicrobial filament 1.75mm, 0.75kg

Zoom in

1
0

Description Discover the revolutionary MatX AMBX-PLA Antimicrobial filament: a groundbreaking innovation in the world of safe 3D printing. This unique product stands out as the first 3D printer filament to provide effective antimicrobial properties without the use of harmful biocides. The MatX AMBX filament is anti-microbial and lab tests* show that it contains >99.99% fewer bacteria compared to standard PLA, the AMBX technology used is 100% safe for both humans and the environment.

This high-quality anti-microbial filament is ideal for printing:

Medical supplies
Household applications

The MatX AMBX-PLA Antimicrobial filament in Traffic Red is supplied on a transparent spool, compatible with all common 3D printers and material stations. For optimal life of the filament, we recommend storage in a dry and dark environment after use.

The MatX AMBX filament has a diameter of 1.75mm and contains 0.75kg of high-quality filament on a transparent spool. This innovative product guarantees safety, durability and excellent performance in 3D printing. With MatX AMBX you choose the future of antimicrobial and safe printing.

*Based on lab testing: ISO22196

Extra information:

Test report antimicrobial effect of PLA 3D print

Specifications

Hazard class:	N/A	Material:	AMBX PLA
Amount:	0.75 kg	Nozzle temp range:	190-215
Brand:	mATX	Our item no:	DFP15010
Colour:	red	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Heated bed temp:	0-60	Is liquid:	no

€63.50 (Incl. 23% VAT)
(€51.63 Excl. 23% VAT)

5-7 day delivery

Spectrum Bloody red Premium PLA filament 1.75mm, 1kg

Zoom in

1
0

Description This 1.75mm Bloody red filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	red	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	-	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

Spectrum dragon red Premium PLA filament 1.75mm, 1kg

Zoom in

1
0

Description This 1.75mm dragon red filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	red	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	-	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

Spectrum fire red SILK Rainbow PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description The Spectrum PLA Silk Rainbow is based on Spectrum's PLA Silk. The silky-smooth appearance of this filament in combination with the special colour gradient ensure that your prints always have a unique look. You print this filament with high precision and stability. This makes this filament perfect for making decorative items such as jewellery, gadgets or artistic decorations. This is a 1.75mm fire red filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	rainbow	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	PLA S	Is liquid:	no

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

5-7 day delivery

Spectrum bloody red PLA Pro filament 1.75mm, 1kg

Zoom in

1
0

Description Improve heat resistance and impact resistance with Spectrum's PLA Pro filament. PLA Pro is a modified PLA filament that combines the benefits of PLA and ABS. This gives this filament high impact resistance and high stiffness. The modified composition ensures improved flow, allowing for higher speed printing. This is a 1.75mm bloody red filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-230 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	red	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	PLA Pro	Is liquid:	no

€33.50 (Incl. 23% VAT)
(€27.24 Excl. 23% VAT)

5-7 day delivery

Spectrum ruby red PLA Silk filament 1.75mm, 1kg

Zoom in

1
0

Description The Spectrum PLA Silk filament gives your 3D prints a satin look. Thanks to this effect, the layer lines are less visible. The pigment that is used, retains the mechanical properties of PLA. As a result, this filament is still easy to print, shrinks little and has a high tensile strength. This is a 1.75mm ruby red filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	red	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	PLA S	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

5-7 day delivery

Spectrum raspberry red PLA Crystal filament 1.75mm, 1kg

Zoom in

1
0

Description The Spectrum Crystal PLA is specially designed for anyone who wants to make transparent and semi-transparent 3D prints. This filament has a clarity that cannot be achieved with normal non-transparent PLA. This makes the filament very suitable for various types of projects, such as jewellery or decorative models. Spectrum PLA Crystal has an increased flow rate of 30%, which makes printing more precise and smoother. In addition, this filament has a temperature resistance of up to 60˚C. This is a 1.75mm raspberry red filament on a 1kg spool.

Tip: Play with the temperature and print speed to get your 3D print semi-transparent or semi-matte.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	red	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	-	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this today!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this today!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

Order now, we can ship this today!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this today!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this today!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this today!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this today!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-225 °C
Amount:	0.1 kg	Our item no:	DFR00000
Brand:	123-3D	Tunnel code:	N/A
Colour:	neutral	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this today!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this today!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Colour:	white	Packing group:	NO
Dimensions:	237 x 271 x 100 mm	Is liquid:	no

Order now, we can ship this today!

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	274 x 265 x 118 mm	Is liquid:	no
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

Order now, we can ship this today!

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Manual:	Download (PDF)	Is liquid:	no
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg
Our item no:	DAR00634

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

5-7 day delivery

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	white	Is liquid:	no
Our item no:	DRW00069

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

5-7 day delivery

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

Order now, we can ship this today!

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

SUNLU filament connector Pre-Order

Zoom in

Description Pre-Order: This item is expected in early October.

Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

*Please note that all pre-order delivery dates are subject to change without warning. You can cancel your order for a refund at any time prior to delivery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Red

1.75mm Red PLA Filament

View other colours:

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Red

1.75mm Red PLA Filament

View other colours: