Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

colorFabb light grey Stonefill filament 1.75mm, 0.7kg

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This light grey colorFabb filament has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195-220 °C
Colour:	light grey	Our item no:	DFP13205
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Material:	stone fill

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

EU warehouse

colorFabb moss green Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour moss green has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195-220 °C
Colour:	green	Our item no:	DFP13237
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Material:	stone fill

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

EU warehouse

colorFabb red brick Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder is added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour 'red brick' has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195-220 °C
Colour:	red	Our item no:	DFP13235
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Material:	stone fill

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

EU warehouse

eSun eMarble white PLA filament 1.75mm, 1kg

Zoom in

Description The white eMarble filament from eSun has a marble appearance. You can easily print the material with your 3D printer. This eSun eMarble PLA filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	180-210 °C
Brand:	eSun	Our item no:	DFE20061
Colour:	marble	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Material:	PLA EMARBLE

Order now, we can ship this tomorrow!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

Polymaker PolyTerra marble-white PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'marble-white' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	190-230 °C
Brand:	Polymaker	Our item no:	DFP14234
Colour:	marble white	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Material:	PLA

Order now, we can ship this tomorrow!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

SUNLU marble PLA filament 1.75mm, 1kg

Zoom in

Description With 1.75mm marble PLA filament you give your prints a unique appearance. Create objects with a realistic marble look, such as busts, sculptures or miniatures of buildings. The PLA filament is easy to print with (without a heated bed) and ensures that you do not suffer from distortion and warping of prints.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	SUNLU	Nozzle temp range:	200-230
Colour:	marble	Our item no:	DFP00171
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-30 °C	Inner diameter:	Ø 7.3 cm
Length:	330 m	Outer diameter:	Ø 19.6 cm
Material:	PLA	Spool width:	6.0 cm

Order now, we can ship this tomorrow!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Polymaker Panchroma™ sandstone Marble PLA filament 1.75mm, 1kg

Zoom in

1
0

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Sandstone colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Material:	PLA Marble
Brand:	Polymaker	Nozzle temp range:	190-230 °C
Colour:	sandstone	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm

Colour:

brick

sandstone

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

EU warehouse

Polymaker Panchroma™ brick Marble PLA filament 1.75mm, 1kg

Zoom in

1
0

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Brick colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Material:	PLA Marble
Brand:	Polymaker	Nozzle temp range:	190-230 °C
Colour:	brick	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm

Colour:

brick

sandstone

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

EU warehouse

Spectrum Stone Age dark PLA filament 1.75mm, 1kg

Zoom in

1
0

Description Create 3D prints that look like they are made of stone with Stone Age Dark PLA from Spectrum. Thanks to the stone look of this filament, the layer lines are also less visible. This makes PLA Stone Age very suitable for making decorative and architectural models. This filament is 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Material:	stone fill
Brand:	Spectrum	Nozzle temp range:	185-225 °C
Colour:	grey	Spool empty weight:	± 250 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-45 °C	Spool width:	6.7 cm

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

EU warehouse

Spectrum Stone Age light PLA filament 1.75mm, 1kg

Zoom in

1
0

Description Create 3D prints that look like they are made of stone with Stone Age Light PLA from Spectrum. Thanks to the stone look of this filament, the layer lines are also less visible. This makes PLA Stone Age very suitable for making decorative and architectural models. This filament is 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Material:	stone fill
Brand:	Spectrum	Nozzle temp range:	185-225 °C
Colour:	grey	Spool empty weight:	± 250 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-45 °C	Spool width:	6.7 cm

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

EU warehouse

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Amount:	0.1 kg	Filament diameter:	1.75 mm
Brand:	123-3D	Nozzle temp range:	210-225 °C
Colour:	neutral	Our item no:	DFR00000

Order now, we can ship this tomorrow!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

1.75mm PLA marble

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

1.75mm PLA marble