Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D carbon PETG filament 2.85mm, 0.5kg

Description The carbon PETG filament contains 20% carbon particles. This gives 3D printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is more resistant to heat, stiffer and more impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE08001
Brand:	123-3D	Roundness:	above 95 percent
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	5.5 cm
Length:	64 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

Order now, we can ship this today!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

123-3D transparent black PETG filament 2.85mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of big, clear objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, the whole has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent black 2.85mm PETG is a clear, slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11017
Brand:	123-3D	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

5-7 day delivery

123-3D black PETG filament 2.85mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11011
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this today!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

123-3D black PETG filament 2.85mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 2.85mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFP01125
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	65-85 °C	Spool width:	6.8 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	225-245 °C	Is liquid:	no

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

5-7 day delivery

123-3D black PETG filament 2.85mm, 2.3kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11026
Amount:	2.3 kg	RAL colour no:	9017
Brand:	123-3D	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	290 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€64.50 (coming soon) (Incl. 23% VAT)
(€52.44 Excl. 23% VAT)

123-3D black PETG filament 2.85mm, 2.3kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFP01126
Amount:	2.3 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Spool width:	10.0 cm
Heated bed temp:	65-85 °C	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	225-245 °C

€64.50 (Incl. 23% VAT)
(€52.44 Excl. 23% VAT)

5-7 day delivery

REAL black PETG filament 2.85mm, 1kg

Zoom in

2
1
0

Description The black PETG filament (2.85mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFP02216
Amount:	1 kg	RAL colour no:	9017
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.6 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	7.0 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.10 mm	Packing group:	NO
Nozzle temp range:	220-250 °C	Is liquid:	no

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

5-7 day delivery

REAL black PETG filament 2.85mm, 1kg

Zoom in

Description The black PETG filament (2.85mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE02016
Amount:	1 kg	RAL colour no:	9017
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL black PETG filament 2.85mm, 5kg

Zoom in

Description The black PETG filament (2.85mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE02064
Amount:	5 kg	RAL colour no:	9017
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Length:	640 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this today!

€137.50 (Incl. 23% VAT)
(€111.79 Excl. 23% VAT)

in stock

REAL black PETG recycled filament 2.85mm, 5kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	5 kg	Our item no:	DFE20142
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	40-80 °C	Spool width:	10.5 cm
Length:	600 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€157.50 (Incl. 23% VAT)
(€128.05 Excl. 23% VAT)

5-7 day delivery

REAL black PC-PETG filament 2.85mm, 0.5kg

Zoom in

Description The black PC-PETG (2.85mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	0.5 kg	Our item no:	DFE02063
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Spool width:	4.5 cm
Length:	75 m	Tunnel code:	N/A
Material:	PETG85 CARBON15	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

REAL black PC-PETG filament 2.85mm, 1kg

Zoom in

Description The black PC-PETG (2.85mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	1 kg	Our item no:	DFE02061
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Spool width:	8.0 cm
Length:	150 m	Tunnel code:	N/A
Material:	PETG85 CARBON15	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€72.50 (Incl. 23% VAT)
(€58.94 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET CF15 filament 2.85mm, 0.75kg

Zoom in

Description The black BASF PET CF15 filament (2.85mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very dimensionally stable and has a very low moisture absorption. This filament contains 15% carbon fibers. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET, but for the best result we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	245-265 °C
Amount:	0.75 kg	Our item no:	DFB00100
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PET CF15	Is liquid:	no

€78.50 (Incl. 23% VAT)
(€63.82 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET filament 2.85mm, 0.75kg

Zoom in

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Our item no:	DFB00089
Amount:	0.75 kg	RAL colour no:	9005
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET filament 2.85mm, 2.5kg

Zoom in

Description The black BASF PET filament (2.85mm) has a deep color and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	2.5 kg	Our item no:	DFB00092
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	black	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€83.00 (Incl. 23% VAT)
(€67.48 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET filament 2.85mm, 4.5kg

Zoom in

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	4.5 kg	Our item no:	DFB00095
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	black	Outer diameter:	Ø 35.0 cm
Filament diameter:	2.85 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€134.00 (Incl. 23% VAT)
(€108.94 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET filament 2.85mm, 8.5kg

Zoom in

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	8.5 kg	Our item no:	DFB00098
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	black	Outer diameter:	Ø 37.0 cm
Filament diameter:	2.85 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€257.00 (Incl. 23% VAT)
(€208.94 Excl. 23% VAT)

5-7 day delivery

colorFabb black PETG economy filament 2.85mm, 0.75kg

Zoom in

Description This colorFabb filament in black has a diameter of 2.85mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13073
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	90 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

colorFabb black PETG economy filament 2.85mm, 2.2kg

Zoom in

Description This colorFabb filament in black has a diameter of 2.85mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp less quickly. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13072
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	270 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

This product is end of life.

colorFabb semi-matte black PETG filament 2.85mm, 0.75kg

Zoom in

Description

Print strong objects with colorFabb PETG filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibers are used to obtain the semi-matt effect. The filament has a diameter of 2.85mm and a weight of 2.2kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13196
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	60-70 °C	Tunnel code:	N/A
Length:	90 m	Packing group:	NO
Material:	PETG semi matte	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

5-7 day delivery

colorFabb semi-matte black PETG filament 2.85mm, 2.2kg

Zoom in

Description

Print strong objects with colorFabb PETG filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibers are used to obtain the semi-matte effect. The filament has a diameter of 2.85mm and a weight of 2.2kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13198
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	270 m	Packing group:	NO
Material:	PETG semi matte	Is liquid:	no

€87.75 (Incl. 23% VAT)
(€71.34 Excl. 23% VAT)

5-7 day delivery

eSun solid black PETG filament 2.85mm, 1kg

Zoom in

Description eSun's solid black PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20052
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	solid black	Spool width:	6.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

Polymaker PolyLite black PETG filament 2.85mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 2.85mm and a black colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14195
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Order now, we can ship this today!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyMax black PETG filament 2.85mm, 0.75kg

Zoom in

Description This Polymaker PolyMax filament in black has a diameter of 2.85mm and is ideal for 3D printing of strong objects. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality than ordinary PETG.

PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. The ideal printing temperature is 230°C to 240°C. For best results, use a heated bed of 70°C to 80°C.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-240 °C
Amount:	0.75 kg	Our item no:	DFP14095
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	4.5 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no

This product is end of life.

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Black

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Black