Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

REAL red PLA Recycled filament 2.85mm, 1kg

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This red PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP12030
Amount:	1 kg	RAL colour no:	3011
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	110 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL blue PLA Recycled filament 2.85mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This blue PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 2.85mm and an ideal printing temperature of 210°C. In addition, with this ultra-strong PLA, you have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-220 °C
Amount:	1 kg	Our item no:	DFP12033
Brand:	REAL	Roundness:	above 95 percent
Colour:	blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	110 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL black PLA recycled filament 2.85mm, 5kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This black PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-220 °C
Amount:	5 kg	Our item no:	DFP12036
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	0-55 °C	Spool width:	10.5 cm
Length:	550 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€137.50 (Incl. 23% VAT)
(€111.79 Excl. 23% VAT)

5-7 day delivery

REAL white PLA Recycled filament 2.85mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This white PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP12040
Amount:	1 kg	RAL colour no:	9016
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	110 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL white PLA Recycled filament 2.85mm, 5kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This white PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-220 °C
Amount:	5 kg	Our item no:	DFP12041
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	0-55 °C	Spool width:	10.5 cm
Length:	550 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€137.50 (Incl. 23% VAT)
(€111.79 Excl. 23% VAT)

5-7 day delivery

REAL grey PLA Recycled filament 2.85mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This grey PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP12044
Amount:	1 kg	RAL colour no:	7009
Brand:	REAL	Roundness:	above 95 percent
Colour:	grey	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	110 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

This product is end of life.

REAL orange PLA Recycled filament 2.85mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This orange PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP12047
Amount:	1 kg	RAL colour no:	8001
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	110 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL green PLA Recycled filament 2.85mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This green PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-220 °C
Amount:	1 kg	Our item no:	DFP12049
Brand:	REAL	Roundness:	above 95 percent
Colour:	green	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	110 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this today!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this today!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

Order now, we can ship this today!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this today!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this today!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this today!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this today!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this today!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this today!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Colour:	white	Packing group:	NO
Dimensions:	237 x 271 x 100 mm	Is liquid:	no

Order now, we can ship this today!

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	274 x 265 x 118 mm	Is liquid:	no
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

Order now, we can ship this today!

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Manual:	Download (PDF)	Is liquid:	no
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg
Our item no:	DAR00634

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

5-7 day delivery

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	white	Is liquid:	no
Our item no:	DRW00069

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

5-7 day delivery

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

Order now, we can ship this today!

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

SUNLU filament connector Pre-Order

Zoom in

Description Pre-Order: This item is expected in early October.

Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

*Please note that all pre-order delivery dates are subject to change without warning. You can cancel your order for a refund at any time prior to delivery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

2.85mm PLA recycled

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

2.85mm PLA recycled