Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D yellow PLA filament 1.75mm, 1.1kg

2
1
0

Description Our yellow 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01043
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

123-3D yellow High Speed PLA filament 1.75mm, 1.1kg

Zoom in

2
1
0

Description This yellow 1.75mm High Speed PLA is ideal for use in combination with your High Speed printer. With this filament you can reach a speed of up to 600mm/s, which is considerably faster than most high speed filaments (which only go up to 300mm/s). High Speed PLA from 123-3D will significantly speed up your 3D printing process, without sacrificing the high quality you have come to expect from us.

Specifications

Hazard class:	N/A	Our item no:	DFP01188
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-65 °C	Spool width:	6.8 cm
Material:	PLA High Speed	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	215-240 °C	Is liquid:	no

Order now, we can ship this today!

€27.50 (Incl. 23% VAT)
(€22.36 Excl. 23% VAT)

in stock

123-3D BK/W/R/Y/DB PLA filament bundle 1.75mm, 1.1kg Total 5.5kg of filament!

123-3D BK/W/R/Y/DB PLA filament bundle 1.75mm, 1.1kg DFE00053

Zoom in

Description The 123-3D own-brand PLA starter pack consists of the 5 most popular standard colours of our new improved 123-3D filament. 123-3D filaments guarantee quality, reliability and good performance.

The colours in our package are: black, white, red, yellow and dark blue.

Normally €117.45, now only €99.45 !!

Specifications

Hazard class:	N/A	Our item no:	DFE00053
Amount:	5.5 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	multi colour	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	195-235

Order now, we can ship this today!

€117.00 15% discount:

€99.45 (Incl. 23% VAT)
(€80.85 Excl. 23% VAT)

in stock

123-3D fluorescent yellow PLA filament 1.75mm, 1.1kg

Zoom in

3
2
1
0

Description Our fluorescent yellow 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01042
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA Fluorescerend	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

123-3D yellow-green PLA filament 1.75mm, 1.1kg

Zoom in

2
1
0

Description Our yellow-green 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	RAL colour no:	6018
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	yellow/green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no
Our item no:	DFP01045

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

123-3D sulfur yellow PLA filament 1.75mm, 1.1kg

Zoom in

2
1
0

Description Our sulfur yellow 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	RAL colour no:	1016
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	-	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no
Our item no:	DFP01047

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

123-3D chameleon yellow-pink PLA filament 1.75mm, 1kg

Zoom in

Description The multicoloured chameleon 1.75mm PLA filament from 123-3D.ie has a beautiful shine. The most special thing about this filament is the unique colour change. Be enchanted by this beautiful yellow-pink chameleon filament and print extra striking 3D designs with it!

This PLA filament is stronger and is less brittle than standard PLA. In addition, it has all the advantages of PLA: it is biodegradable, does not warp, does not deform and leaves little odour during 3D printing. A heated bed is not necessary.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP11068
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	yellow pink	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	205-230

€34.50 (coming soon) (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

REAL fluorescent yellow PLA filament 1.75mm, 0.5kg

Zoom in

Description The fluorescent yellow REAL PLA filament (1.75mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp. The filament has a perfected round shape to prevent jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	0.5 kg	Our item no:	DFP02079
Brand:	REAL	Roundness:	above 95 percent
Colour:	fluorescent yellow	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL fluorescent yellow PLA filament 1.75mm, 1kg

Zoom in

Description The fluorescent yellow REAL PLA filament (1.75mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp, for example in the disco. The filament has a perfected round shape to prevent jamming. PLA can print objects in any shape, whereby details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	1 kg	Our item no:	DFP02015
Brand:	REAL	Roundness:	above 95 percent
Colour:	fluorescent yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL yellow PLA filament 1.75mm, 0.5kg

Zoom in

Description The yellow REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02073
Amount:	0.5 kg	RAL colour no:	1016
Brand:	REAL	Roundness:	above 95 percent
Colour:	yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL yellow PLA filament 1.75mm, 1kg

Zoom in

Description The yellow REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02009
Amount:	1 kg	RAL colour no:	1016
Brand:	REAL	Roundness:	above 95 percent
Colour:	yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL satin sun PLA filament 1.75mm, 0.5kg

Zoom in

Description This sun-yellow REAL PLA filament (1.75mm) has a beautiful satin sheen and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	0.5 kg	Our item no:	DFP02051
Brand:	REAL	Roundness:	above 95 percent
Colour:	satin sun	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

REAL sparkle sulfur yellow PLA filament 1.75mm, 0.5kg

Zoom in

Description For 3D prints with a sparkling effect, choose our yellow sulfur-coloured PLA filament with glitter!

Create striking 3D prints with this unique filament and determine the colour intensity yourself by varying the wall thickness; the thicker the wall, the more beautiful the shiny glitter effect. In addition, this beautiful filament is slightly stronger than standard PLA, making it suitable for a wide variety of objects.

The glitter PLA filament has a diameter of 1.75mm and an ideal print temperature between 180 and 230°C. It is very easy to use, biodegradable and does not require a heated bed to print. It is recommended to clean the nozzle of the nozzle after use with cleaning filament. Store the glitter PLA filament in a cool and dry place and do not leave it in the sun.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	0.5 kg	Our item no:	DFP02137
Brand:	REAL	Roundness:	above 95 percent
Colour:	sulfur yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse yellow PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is yellow and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFB00105
Amount:	0.75 kg	RAL colour no:	1003
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	210-220 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

colorFabb yellow LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13193
Colour:	yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW PLA	Is liquid:	no

Order now, we can ship this today!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

colorFabb signal yellow PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in signal yellow. PLA/PHA consists of a mix of bioplastics and is recyclable. It is strong and is less brittle than other filaments. You can create beautiful and striking prints with this colour yellow. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13136
Colour:	signal yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PLA matte	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.50 (coming soon) (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

Dremel yellow PLA filament 1.75mm, 0.75kg

Zoom in

Description Create detailed 3D prints with a high-quality finish with this yellow PLA filament from Dremel.

This biodegradable PLA filament is an extremely popular and user-friendly filament type. Ideal for producing visually appealing 3D objects that require little force. In addition, this filament also has a slightly higher print temperature (220°C) than regular PLA and an optimal bed temperature of 35°C. With a diameter of 1.75mm it is compatible with almost all 3D printers.

In addition, the coil is equipped with an RFID chip, so that your Dremel printer automatically uses the correct settings. The perfect material for beginners and experts!

Specifications

Hazard class:	N/A	Our item no:	DCP00185
Amount:	0.75 kg	Inner diameter:	Ø 1.9 cm
Brand:	Dremel	Outer diameter:	Ø 18.0 cm
Colour:	yellow	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	200-240 °C

Order now, we can ship this today!

€41.50 (Incl. 23% VAT)
(€33.74 Excl. 23% VAT)

in stock

eSun eSilk dark yellow PLA filament 1.75mm, 1kg

Zoom in

Description eSun's dark yellow eSilk PLA filament has a glossy and satin texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20195
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	dark yellow	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PLA ESILK	Is liquid:	no
Nozzle temp range:	190-220 °C

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

5-7 day delivery

eSun eSilk yellow PLA filament 1.75mm, 1kg

Zoom in

Description eSun's yellow eSilk PLA filament has a glossy and satin texture. The printing surface is smooth. The material is easy to print and has high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20206
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	yellow	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PLA ESILK	Is liquid:	no
Nozzle temp range:	190-220 °C

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

5-7 day delivery

eSun glass lemon PLA filament 1.75mm, 1kg

Zoom in

Description The glass lemon PLA from eSun is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA has a high stiffness and strength and is therefore comparable to PC. In addition, it has a low shrinkage, does not warp and does not tear. Use PLA filament for prototyping, concept models and casting metal parts. This eSun PLA filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20065
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	lemon glass	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	180-210 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€24.50 (coming soon) (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

eSun yellow PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's yellow filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-210 °C
Amount:	1 kg	Our item no:	DFE20218
Brand:	eSun	Inner diameter:	Ø 9.0 cm
Colour:	yellow	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA matte	Is liquid:	no

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

5-7 day delivery

eSun yellow PLA+ filament 1.75mm, 1kg

Zoom in

Description eSun's yellow PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20207
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	yellow	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA matte	Is liquid:	no
Nozzle temp range:	190-210 °C

Order now, we can ship this today!

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

in stock

Polymaker PolyLite chameleon yellow-blue Dual Silk PLA filament 1.75mm, 1kg

Zoom in

Description The Chameleon Yellow-Blue PolyLite Dual Silk PLA from Polymaker has an amazing, two-tone, silky gloss effect. The colour of your print seems to change from Yellow to Blue when you view it from a different angle. In addition, this filament is very easy to use and environmentally friendly. Perfect for making decorative prints.

Specifications

Hazard class:	N/A	Our item no:	DFP14335
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite yellow PLA filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a bright yellow colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190 to 230°C. We recommend a temperature between 25 and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14062
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	40-60 mm/s	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this today!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite yellow PLA Pro filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite yellow PLA Pro filament is of high-quality in toughness, stiffness and impact resistance. The filament offers technical properties and is just as easy to print as standard PLA. This Polymaker PLA Pro filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14259
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	30-60 °C	Packing group:	NO
Material:	PLA Pro	Is liquid:	no
Nozzle temp range:	190-220 °C

Order now, we can ship this today!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

Polymaker PolyLite yellow Silk PLA filament 1.75mm, 1kg

Zoom in

Description Print your designs with a glossy effect with the yellow PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. As a result, the separate print layers on the side surfaces are less visible, resulting in a smooth surface.

Specifications

Hazard class:	N/A	Our item no:	DFP14326
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyMax yellow PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright yellow colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190 to 230°C. For best results, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14100
Amount:	0.75 kg	Spool empty weight:	± 125 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	4.5 cm
Filament print speed:	40-60 mm/s	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra banana PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth banana-coloured PolyTerra filament has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230°C. For best results, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14152
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	banana	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra savannah yellow PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Savannah Yellow' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14146
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	savannah yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

XYZprinting transparent yellow PLA filament 1.75mm, 0.6kg (Refill)

Zoom in

Description With this transparent yellow XYZprinting PLA filament you can easily print all kinds of objects. The filament is equipped with the XYZ chip so that it integrates perfectly with the following XYZ da Vinci printers:

da Vinci 1.0A
da Vinci 2.0A Duo
da Vinci 1.0 AiO

Supplied without cartridge. See the manual for replacing the coil here.

NB:
this filament does not work on the da Vinci Junior and Mini. Click here for the Junior and Mini filament.

Specifications

Hazard class:	N/A	Our item no:	DFP05020
Amount:	0.6 kg	Inner diameter:	Ø 5.0 cm
Brand:	XYZprinting	Outer diameter:	Ø 16.8 cm
Colour:	transparent yellow	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	195-215 °C

This product is end of life.

eSun almond yellow ePLA-Matte filament 1.75mm, 1kg

Zoom in

Description This eSun ePLA-Matte filament in the colour Almond Yellow is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Hazard class:	N/A	Our item no:	DFE20257
Amount:	1 kg	Inner diameter:	Ø 5.1 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	-	Spool width:	6.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	45-60 °C	Packing group:	NO
Material:	-	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this today!

€24.00 (Incl. 23% VAT)
(€19.51 Excl. 23% VAT)

in stock

123-3D pastel yellow PLA filament 1.75mm, 1.1kg

Zoom in

2
1
0

Description Our pastel yellow 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01132
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA Pastel	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order other colours:

Pastel pink - 1,1 kg - 1,75 mm - 123-3D PLA for €24.50

Pastel mint green - 1,1 kg - 1,75 mm - 123-3D PLA for €24.50

Pastel turquoise - 1,1 kg - 1,75 mm - 123-3D PLA for €24.50

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

123-3D pastel light yellow PLA filament 1.75mm, 1.1kg

Zoom in

2
1
0

Description Our pastel light yellow 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01133
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	light yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA Pastel	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

Polymaker PolyTerra Dual Chameleon (teal-yellow) PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Chameleon colour is teal on one side and yellow on the other. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14389
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	green/yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra Dual Sunrise (red-yellow) PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Sunrise colour is red on one side and yellow on the other. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14390
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite Luminous yellow PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is yellow and has a diameter of 1.75mm.

Note: For frequent use, a hardened steel nozzle is recommended.

Specifications

Hazard class:	N/A	Our item no:	DFP14401
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

5-7 day delivery

123-3D BK/W/DB/N/R/Y/GRY/O PLA filament bundle 1.75mm, 8.8kg Total 8.8kg of filament!

123-3D BK/W/DB/N/R/Y/GRY/O PLA filament bundle 1.75mm, 8.8kg DFE00063

Zoom in

Description Our PLA filament bundle consists of the 8 most popular colours of our new improved 123-3D filament. This filament bundle is designed with affordability in mind, suitable for any maker from beginner to advanced. Thanks to the high quality, the 123-3D PLA filament is less brittle and the filament has a better hardness than standard PLA.

This bundle contains:

1 x 123-3D black PLA filament 1.75mm, 1.1kg
1 x 123-3D white PLA filament 1.75mm, 1.1kg
1 x 123-3D dark blue PLA filament 1.75mm, 1.1kg
1 x 123-3D neutral PLA filament 1.75mm, 1.1kg
1 x 123-3D red PLA filament 1.75mm, 1.1kg
1 x 123-3D yellow PLA filament 1.75mm, 1.1kg
1 x 123-3D grey PLA filament 1.75mm, 1.1kg
1 x 123-3D orange PLA filament 1.75mm, 1.1kg

Normally €196, now only €181 !!

Specifications

Hazard class:	N/A	Our item no:	DFE00063
Amount:	8.8 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	multi colour	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	195-235

Order now, we can ship this today!

€181.00 (Incl. 23% VAT)
(€147.15 Excl. 23% VAT)

in stock

REAL yellow PLA filament 1.75mm, 0.5kg

Zoom in

2
1
0

Description The yellow REAL PLA filament (1.75mm) has a vibrant color and is suitable for 3D printing of a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, which also shows off details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly type of plastic, suitable for recycling.

Read more about printing with PLA filament here .

Specifications

Hazard class:	N/A	Our item no:	DFP02250
Amount:	0.5 kg	RAL colour no:	1016
Brand:	REAL	Roundness:	above 95 percent
Colour:	yellow	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	7.0 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	190-215 °C	Is liquid:	no

€20.50 (Incl. 23% VAT)
(€16.67 Excl. 23% VAT)

5-7 day delivery

REAL fluorescent yellow PETG filament 1.75mm. 0.5kg

Zoom in

Description The fluorescent yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02336
Amount:	0.5 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	fluorescent yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.50 (coming soon) (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

Spectrum Bahama yellow Premium PLA filament 1.75mm, 1kg

Zoom in

1
0

Description This 1.75mm Bahama yellow filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	yellow	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	mm/s	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:		Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

Spectrum Bahama yellow PLA Pro filament 1.75mm, 1kg

Zoom in

1
0

Description Improve heat resistance and impact resistance with Spectrum's PLA Pro filament. PLA Pro is a modified PLA filament that combines the benefits of PLA and ABS. This gives this filament high impact resistance and high stiffness. The modified composition ensures improved flow, allowing for higher speed printing. This is a 1.75mm Bahama Yellow filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-230 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	yellow	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	mm/s	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	PLA Pro	Is liquid:	no

€33.50 (Incl. 23% VAT)
(€27.24 Excl. 23% VAT)

5-7 day delivery

Spectrum electric yellow PLA Crystal filament 1.75mm, 1kg

Zoom in

1
0

Description The Spectrum Crystal PLA is specially designed for anyone who wants to make transparent and semi-transparent 3D prints. This filament has a clarity that cannot be achieved with normal non-transparent PLA. This makes the filament very suitable for various types of projects, such as jewellery or decorative models. Spectrum PLA Crystal has an increased flow rate of 30%, which makes printing more precise and smoother. In addition, this filament has a temperature resistance of up to 60˚C. This is a 1.75mm electric yellow filament on a 1kg spool.

Tip: Play with the temperature and print speed to get your 3D print semi-transparent or semi-matte.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	yellow	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	mm/s	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:		Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this today!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this today!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

Order now, we can ship this today!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this today!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this today!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this today!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this today!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-225 °C
Amount:	0.1 kg	Our item no:	DFR00000
Brand:	123-3D	Tunnel code:	N/A
Colour:	neutral	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this today!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this today!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Colour:	white	Packing group:	NO
Dimensions:	237 x 271 x 100 mm	Is liquid:	no

Order now, we can ship this today!

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	274 x 265 x 118 mm	Is liquid:	no
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

Order now, we can ship this today!

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Manual:	Download (PDF)	Is liquid:	no
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg
Our item no:	DAR00634

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

5-7 day delivery

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	white	Is liquid:	no
Our item no:	DRW00069

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

5-7 day delivery

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

Order now, we can ship this today!

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

SUNLU filament connector Pre-Order

Zoom in

Description Pre-Order: This item is expected in early October.

Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

*Please note that all pre-order delivery dates are subject to change without warning. You can cancel your order for a refund at any time prior to delivery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Yellow

1.75mm Yellow PLA Filament

View other colours:

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Yellow

1.75mm Yellow PLA Filament

View other colours: