Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D black ASA filament 1.75mm, 1kg DFP01108

2
1
0

Description This black ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01108
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

in stock

123-3D grey ASA filament 1.75mm, 1kg

Zoom in

2
1
0

Description This black ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01104
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

Delivery in New Year

123-3D neutral ASA filament 1.75mm, 1kg

Zoom in

2
1
0

Description This neutral ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01106
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	neutral	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

in stock

REAL blue Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This blue 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02012
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL yellow Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This yellow 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02021
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL grey Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This grey 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02013
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL green Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This green 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02014
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL light green Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This light green 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02015
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	light green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL neutral Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This neutral 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02016
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

REAL orange Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This orange 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02017
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL red Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This red 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02018
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

REAL white Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This white 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02019
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL black Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This black 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02010
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL black ASA-CF filament 1.75mm, 1kg

Zoom in

Description ASA-CF filament from REAL has all the benefits of standard ASA with the addition of 10% carbon particles, which provides better reliability and stiffness. It is easy to print, has good bonding between layers and has a beautiful matte appearance. In addition, it is just as water, UV and heat resistant as standard ASA and prints from this material can be used perfectly outdoors. With ASA-CF you get a strong and low-shrink filament that is perfect for prints that must also be able to easily withstand different weather conditions.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-265 °C
Amount:	1 kg	Our item no:	DFS02022
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	85-115 °C	Packing group:	NO
Material:	-	Is liquid:	no

€62.50 (Incl. 23% VAT)
(€50.81 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse neutral ASA filament 1.75mm, 0.75kg

Zoom in

Description This neutral BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Hazard class:	N/A	Nozzle temp range:	260-280 °C
Amount:	0.75 kg	Our item no:	DFB00038
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	100-120 °C	Packing group:	NO
Material:	ASA	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse black ASA filament 1.75mm, 0.75kg

Zoom in

Description This black BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Hazard class:	N/A	Our item no:	DFB00039
Amount:	0.75 kg	RAL colour no:	9005
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	100-120 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	260-280 °C

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

ColorFabb natural ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour natural has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance up to 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13000
Colour:	natural	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	ASA	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

Delivery in New Year

ColorFabb black ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour black has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance of 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13001
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	90 m	Packing group:	NO
Material:	ASA	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

Delivery in New Year

ColorFabb natural LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The natural LW-ASA filament from colorFabb has a diameter of 1.75mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96 degrees.

Note: the colour may vary.

Print recommendation: use a heated platform of 90-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13016
Colour:	natural	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW ASA	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

ColorFabb black LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The black LW-ASA filament from colorFabb has a diameter of 1.75mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13014
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW ASA	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

eSun black eASA filament 1.75mm, 1kg

Zoom in

Description eSun eASA filament has mechanical properties equal to those of ABS. In addition, eASA is more resistant to bad weather conditions and UV radiation. The strength and stiffness, in combination with the high impact resistance, make this filament ideal for outdoor prints.

Specifications

Hazard class:	N/A	Our item no:	DFE20231
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	black	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	90-110 °C	Packing group:	NO
Material:	-	Is liquid:	no
Nozzle temp range:	240-270 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite army brown ASA filament 1.75mm, 1kg

Zoom in

Description This army brown Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14282
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	army brown	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

in stock

Polymaker PolyLite army green ASA filament 1.75mm, 1kg

Zoom in

Description This army green Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14278
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	army green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite black ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14054
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 3kg

Zoom in

Description This black Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14180
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	black	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite blue ASA filament 1.75mm, 1kg

Zoom in

Description This blue Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14181
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite green ASA filament 1.75mm, 1kg

Zoom in

Description This green Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14279
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite grey ASA filament 1.75mm, 1kg

Zoom in

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14183
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite grey ASA filament 1.75mm, 3kg

Zoom in

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14283
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	grey	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€95.50 (Incl. 23% VAT)
(€77.64 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite natural ASA filament 1.75mm, 1kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14185
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	natural	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite natural ASA filament 1.75mm, 3kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14186
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	natural	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite orange ASA filament 1.75mm, 1kg

Zoom in

Description This orange Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14276
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite purple ASA filament 1.75mm, 1kg

Zoom in

Description This purple Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14281
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	purple	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite red ASA filament 1.75mm, 1kg

Zoom in

Description This red Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14189
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite teal ASA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite ASA filament in the colour teal has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14280
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	teal	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite white ASA filament 1.75mm, 1kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14056
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite white ASA filament 1.75mm, 3kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14190
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	white	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite yellow ASA filament 1.75mm, 1kg

Zoom in

Description This yellow Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14277
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

Delivery in New Year

Zortrax graphite Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this graphite Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The grey filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00111
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	graphite	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

Delivery in New Year

Zortrax pure white Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure white Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The white filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00115
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	pure white	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

Delivery in New Year

Zortrax pure black Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure black Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The black filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00113
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	pure black	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

Delivery in New Year

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

Magigoo Pro 3D glue stick for PC filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with PC filament. The adhesive stick ensures perfect adhesion of PC-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! You use the Magigoo PC glue stick on glass and plastic surfaces. The package contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00208	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

€24.75 (Incl. 23% VAT)
(€20.12 Excl. 23% VAT)

Delivery in New Year

Spectrum dark grey ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm dark grey filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	grey	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum deep black ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm deep black filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	black	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum lime green ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm lime green filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	green	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum natural ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm natural filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	neutral	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum navy blue ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm navy blue filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	blue	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum Pacific blue ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm Pacific blue filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	blue	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum polar white ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm polar white filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	white	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum silver star ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm silver star filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	silver	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum traffic yellow ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm traffic yellow filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	yellow	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

Spectrum black ASA-X CF10 filament 1.75mm, 0.5kg

Zoom in

1
0

Description Spectrum's ASA-X CF10 filament is ideal for creating weatherproof 3D prints with a carbon look. This filament performs well, even with prolonged exposure to UV radiation, temperature changes and humidity. In addition, it retains its hardness and stiffness in changing weather conditions. ASA-C CF10 shrinks little and is easy to print. The carbon matte effect also ensures that the layer lines are less visible. This is a 1.75mm black filament on a 0.5kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	235 - 260 °C
Amount:	0.5 kg	Spool empty weight:	± 220 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	black	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	55.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	90-110 °C	Packing group:	NO
Material:	-	Is liquid:	no

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

Delivery in New Year

Spectrum black ASA-X CF10 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum's ASA-X CF10 filament is ideal for creating weatherproof 3D prints with a carbon look. This filament performs well, even with prolonged exposure to UV radiation, temperature changes and humidity. In addition, it retains its hardness and stiffness in changing weather conditions. ASA-C CF10 shrinks little and is easy to print. The carbon matte effect also ensures that the layer lines are less visible. This is a 1.75mm black filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	235 - 260 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	black	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	90-110 °C	Packing group:	NO
Material:	-	Is liquid:	no

€59.50 (Incl. 23% VAT)
(€48.37 Excl. 23% VAT)

Delivery in New Year

Spectrum black ASA Kevlar filament 1.75mm, 0.75kg

Zoom in

1
0

Description Go for the durable Spectrum ASA Kevlar, an ASA filament that contains added Kevlar fibres. This makes the filament resistant to both different weather conditions and damage from impact. Thanks to the combination of ASA and Kevlar, this filament has a long lifespan. Kevlar itself is not resistant to UV radiation, but ASA is. In addition, the added fibres ensure less shrinkage, which is ideal for larger 3D prints. ASA Kevlar is suitable for use in designs that need to be strong and resistant to sunlight. The Kevlar particles give your 3D prints a rough and matte appearance. This is a 1.75mm black filament on a 0.75kg spool.

Specifications

Hazard class:	N/A	Heated bed temp:	80-100 °C
Amount:	0.75 kg	Material:	-
Brand:	Spectrum	Nozzle temp range:	240-270 °C
Colour:	black	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Filament print speed:	-	Is liquid:	no

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

Delivery in New Year

Spectrum natural ASA Kevlar filament 1.75mm, 0.75kg

Zoom in

1
0

Description Go for the durable Spectrum ASA Kevlar, an ASA filament that contains added Kevlar fibres. This makes the filament resistant to both different weather conditions and damage from impact. Thanks to the combination of ASA and Kevlar, this filament has a long lifespan. Kevlar itself is not resistant to UV radiation, but ASA is. In addition, the added fibres ensure less shrinkage, which is ideal for larger 3D prints. ASA Kevlar is suitable for use in designs that need to be strong and resistant to sunlight. The Kevlar particles give your 3D prints a rough and matte appearance. This is a 1.75mm natural filament on a 0.75kg spool.

Specifications

Hazard class:	N/A	Heated bed temp:	80-100 °C
Amount:	0.75 kg	Material:	-
Brand:	Spectrum	Nozzle temp range:	240-270 °C
Colour:	neutral	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Filament print speed:	-	Is liquid:	no

€46.90 (Incl. 23% VAT)
(€38.13 Excl. 23% VAT)

Delivery in New Year

Spectrum ASA 275 filament 1.75mm, 0.25kg (5-pack)

Zoom in

1
0

Description This 5-pack of Spectrum ASA 275 contains 5 x 0.25kg filament. This allows you to use multiple colours for your 3D prints at a low cost. In this pack you will find the following colours:

ASA 275 Polar White
ASA 275 Deep Black
ASA 275 Silver Star
ASA 275 Navy Blue
ASA 275 Bloody Red

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	1.25 kg	Packing group:	NO
Brand:	Spectrum	Is liquid:	no
Filament diameter:	1.75 mm

€62.50 (Incl. 23% VAT)
(€50.81 Excl. 23% VAT)

Delivery in New Year

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

Delivery in New Year

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Colour:	white	Packing group:	NO
Dimensions:	237 x 271 x 100 mm	Is liquid:	no

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	274 x 265 x 118 mm	Is liquid:	no
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Manual:	Download (PDF)	Is liquid:	no
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg
Our item no:	DAR00634

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

Delivery in New Year

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	white	Is liquid:	no
Our item no:	DRW00069

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

Delivery in New Year

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

1.75mm ASA

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

1.75mm ASA