Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D orange PLA filament 1.75mm, 1.1kg

2
1
0

Description Our orange 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	RAL colour no:	2008
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	orange	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no
Our item no:	DFP01065

Order now, we can ship this tomorrow!

€24.50 20% discount:

€19.60 (Incl. 23% VAT)
(€15.93 Excl. 23% VAT)

in stock

123-3D BK/W/GR/GRY/OR PLA filament bundle 1.75mm, 1.1kg Total 5.5kg of filament!

123-3D BK/W/GR/GRY/OR PLA filament bundle 1.75mm, 1.1kg DFE00065

Zoom in

Description The 123-3D own-brand PLA starter pack consists of the 5 most popular standard colours of our new improved 123-3D filament. 123-3D filaments guarantee quality, reliability and good performance.

The colours in our package are: black, white, green, grey and orange.

Normally €122.50, now only €98 !!

Specifications

Hazard class:	N/A	Our item no:	DFE00065
Amount:	5.5 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	multi colour	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	195-235

Order now, we can ship this tomorrow!

€122.50 20% discount:

€98.00 (Incl. 23% VAT)
(€79.67 Excl. 23% VAT)

in stock

123-3D fluorescent orange PLA filament 1.75mm, 1.1kg

Zoom in

3
2
1
0

Description Our fluorescent orange 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01064
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	orange	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA Fluorescerend	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this tomorrow!

€24.50 20% discount:

€19.60 (Incl. 23% VAT)
(€15.93 Excl. 23% VAT)

in stock

REAL fluorescent orange PLA filament 1.75mm, 0.5kg

Zoom in

Description This fluorescent orange REAL PLA filament (1.75mm) allows you to print accessories and sculptures that light up under a blacklight/UV lamp. The filament has a perfected round shape to prevent jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	0.5 kg	Our item no:	DFP02080
Brand:	REAL	Roundness:	above 95 percent
Colour:	fluorescent orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL fluorescent orange PLA filament 1.75mm, 1kg

Zoom in

Description The fluorescent orange REAL PLA filament (1.75mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp, for example in the disco. The filament has a perfected round shape to prevent jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	1 kg	Our item no:	DFP02016
Brand:	REAL	Roundness:	above 95 percent
Colour:	fluorescent orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL orange PLA filament 1.75mm, 0.5kg

Zoom in

Description The orange REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02074
Amount:	0.5 kg	RAL colour no:	2008
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

Order now, we can ship this tomorrow!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL orange PLA filament 1.75mm, 1kg

Zoom in

Description The orange REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02010
Amount:	1 kg	RAL colour no:	2008
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215

Order now, we can ship this tomorrow!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL orange PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This orange PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA, you have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP12046
Amount:	1 kg	RAL colour no:	8001
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA R	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL rust orange PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description The rust orange PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-225 °C
Amount:	0.5 kg	Our item no:	DFP02155
Brand:	REAL	Roundness:	above 95 percent
Colour:	rust orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

in stock

REAL rust orange PLA Matte filament 1.75mm, 1kg

Zoom in

Description The rust orange PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-225 °C
Amount:	1 kg	Our item no:	DFP02164
Brand:	REAL	Roundness:	above 95 percent
Colour:	rust orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

REAL sparkle orange quartz PLA filament 1.75mm, 0.5kg

Zoom in

Description For 3D prints with a sparkling effect, choose our orange quartz-coloured PLA filament with glitter!

Create striking 3D prints with this unique filament and determine the colour intensity yourself by varying the wall thickness; the thicker the wall, the more beautiful the shiny glitter effect. In addition, this beautiful filament is slightly stronger than standard PLA, making it suitable for a wide variety of objects.

The glitter PLA filament has a diameter of 1.75mm and an ideal print temperature between 180 and 230°C. It is very easy to use, biodegradable and does not require a heated bed to print. It is recommended to clean the nozzle of the nozzle after use with cleaning filament. Store the glitter PLA filament in a cool and dry place and do not leave it in the sun.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	0.5 kg	Our item no:	DFP02134
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange quartz	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse orange PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is orange and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFB00115
Amount:	0.75 kg	RAL colour no:	2008
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	210-220 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

colorFabb pastel orange Vibers PLA filament 1.75mm, 0.75kg

Zoom in

Description With this Vibers PLA filament from colorFabb you can create the most stunning smooth prints with a matte finish. The product was developed in collaboration with the Dutch company Vibers and contains 10% elephant grass. The filament is therefore slightly more brittle, but the CO2 footprint of each print is no less than a third (!) less than with normal PLA.

This colorFabb filament has a diameter of 1.75mm. The colour is pastel orange and the filament is supplied on a spool of recycled cardboard to further minimise the use of plastic.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13241
Colour:	pastel orange	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	vibers	Is liquid:	no

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

colorFabb dutch orange PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Print quality 3D objects with ease with the colorFabb PLA/PHA filament in Dutch orange. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. This warm, vibrant shade of orange makes prints stand out. This filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13120
Colour:	orange	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PLA matte	Is liquid:	no

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

5-7 day delivery

Dremel orange PLA filament 1.75mm, 0.75kg

Zoom in

Description Create detailed 3D prints with a high-quality finish with this orange PLA filament from Dremel.

This biodegradable PLA filament is an extremely popular and user-friendly filament type. Ideal for producing visually appealing 3D objects that require little force. In addition, this filament also has a slightly higher print temperature (220°C) than regular PLA and an optimal bed temperature of 35°C. With a diameter of 1.75mm it is compatible with almost all 3D printers.

In addition, the coil is equipped with an RFID chip, so that your Dremel printer automatically uses the correct settings. The perfect material for beginners and experts!

Specifications

Hazard class:	N/A	Our item no:	DCP00181
Amount:	0.75 kg	Inner diameter:	Ø 1.9 cm
Brand:	Dremel	Outer diameter:	Ø 18.0 cm
Colour:	orange	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	200-240 °C

Order now, we can ship this tomorrow!

€41.50 (Incl. 23% VAT)
(€33.74 Excl. 23% VAT)

in stock

eSun glass orange PLA filament 1.75mm, 1kg

Zoom in

Description eSun's glass orange PLA is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA has a high stiffness and strength and is therefore comparable to PC. In addition, it has a low shrinkage, does not warp and does not tear. Use PLA filament for prototyping, concept models and casting metal parts. This eSun PLA filament has a diameter of 1.75 mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20066
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	orange glass	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	180-210 °C

Order now, we can ship this tomorrow!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

eSun orange PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's orange filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-210 °C
Amount:	1 kg	Our item no:	DFE20213
Brand:	eSun	Inner diameter:	Ø 9.0 cm
Colour:	orange	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA matte	Is liquid:	no

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

5-7 day delivery

eSun orange PLA+ filament 1.75mm, 1kg

Zoom in

Description eSun's orange PLA+ filament from eSun is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20099
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	orange	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA matte	Is liquid:	no
Nozzle temp range:	190-210 °C

Order now, we can ship this tomorrow!

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

in stock

Polymaker PolyLite orange PLA filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a bright orange colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190 to 230°C. We recommend a temperature between 25 and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14070
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	40-60 mm/s	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite orange PLA Pro filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite orange PLA Pro filament is of high-quality in toughness, stiffness and impact resistance. The filament offers technical properties and is just as easy to print as standard PLA. This Polymaker PLA Pro filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14260
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	30-60 °C	Packing group:	NO
Material:	PLA Pro	Is liquid:	no
Nozzle temp range:	190-220 °C

Order now, we can ship this tomorrow!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

Polymaker PolyLite orange Silk PLA filament 1.75mm, 1kg

Zoom in

Description Print your designs with a glossy effect with the orange PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. As a result, the separate print layers on the side surfaces are less visible, resulting in a smooth surface.

Specifications

Hazard class:	N/A	Our item no:	DFP14325
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyMax orange PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and bright orange colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190 to 230°C. For best results, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14106
Amount:	0.75 kg	Spool empty weight:	± 125 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	4.5 cm
Filament print speed:	40-60 mm/s	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra peach PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth peach-coloured PolyTerra filament has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every coil sold.

The ideal print temperature of this filament is 190 to 230°C. For best results, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14142
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	peach	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this tomorrow!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

Polymaker PolyTerra sunrise orange PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Sunrise Orange' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14154
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	sunrise orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

€21.50 (coming soon) (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

Polymaker PolyTerra orange PLA+ filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA+ filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. PLA+ filament is also optimised for better layer adhesion. The PolyTerra filament in the colour 'orange' has a silky smooth finish and is partly of natural origin. Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14359
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA matte	Is liquid:	no
Nozzle temp range:	190-230 °C

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

5-7 day delivery

REAL orange PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description The orange REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing of a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, which also shows off details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly type of plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02266
Amount:	1 kg	RAL colour no:	2008
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	7.0 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	190-215 °C	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL rust orange PLA Matte filament 1.75mm, 1kg

Zoom in

Description The rust orange PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very simple; the material has good bed adhesion and can be printed faster than with standard PLA filament.

Because the filament partly contains recycled material, its colour may differ per roll.

Specifications

Hazard class:	N/A	Our item no:	DFP02363
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	rust orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	0-60 °C	Tunnel code:	N/A
Material:	PLA matte	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	205-225 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra Dual shadow orange (orange-black) PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Shadow Orange colour is orange on one side and black on the other. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14384
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyTerra Dual foggy orange (grey-orange) PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Foggy Orange colour is orange on one side and grey on the other. The filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFP14385
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite Luminous orange PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is orange and has a diameter of 1.75mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Hazard class:	N/A	Our item no:	DFP14398
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25-60 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Nozzle temp range:	190-230 °C	Is liquid:	no

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

5-7 day delivery

123-3D BK/W/DB/N/R/Y/GRY/O PLA filament bundle 1.75mm, 8.8kg Total 8.8kg of filament!

123-3D BK/W/DB/N/R/Y/GRY/O PLA filament bundle 1.75mm, 8.8kg DFE00063

Zoom in

Description Our PLA filament bundle consists of the 8 most popular colours of our new improved 123-3D filament. This filament bundle is designed with affordability in mind, suitable for any maker from beginner to advanced. Thanks to the high quality, the 123-3D PLA filament is less brittle and the filament has a better hardness than standard PLA.

This bundle contains:

1 x 123-3D black PLA filament 1.75mm, 1.1kg
1 x 123-3D white PLA filament 1.75mm, 1.1kg
1 x 123-3D dark blue PLA filament 1.75mm, 1.1kg
1 x 123-3D neutral PLA filament 1.75mm, 1.1kg
1 x 123-3D red PLA filament 1.75mm, 1.1kg
1 x 123-3D yellow PLA filament 1.75mm, 1.1kg
1 x 123-3D grey PLA filament 1.75mm, 1.1kg
1 x 123-3D orange PLA filament 1.75mm, 1.1kg

Normally €196, now only €156.80 !!

Specifications

Hazard class:	N/A	Our item no:	DFE00063
Amount:	8.8 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	multi colour	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	195-235

Order now, we can ship this tomorrow!

€196.00 20% discount:

€156.80 (Incl. 23% VAT)
(€127.48 Excl. 23% VAT)

in stock

REAL orange PLA filament 1.75mm, 0.5kg

Zoom in

2
1
0

Description The orange REAL PLA filament (1.75 mm) has a vibrant color and is suitable for 3D printing of a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, which also shows off details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly type of plastic, suitable for recycling.

Read more about printing with PLA filament here .

Specifications

Hazard class:	N/A	Our item no:	DFP02265
Amount:	0.5 kg	RAL colour no:	2008
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	7.0 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	190-215 °C	Is liquid:	no

€20.50 (Incl. 23% VAT)
(€16.67 Excl. 23% VAT)

5-7 day delivery

REAL orange PLA Recycled filament 1.75mm, 1kg

Zoom in

2
1
0

Description The orange REAL Recycled PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02321
Amount:	1 kg	RAL colour no:	8001
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	7.0 cm
Material:	PLA R	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	190-220 °C	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL fluorescent orange filament 1.75mm, 1 kg

Zoom in

3
2
1
0

Description The fluorescent orange REAL PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02339
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA Fluorescerend	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

Spectrum lion orange Premium PLA filament 1.75mm, 1kg

Zoom in

1
0

Description This 1.75mm lion orange filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	orange	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	-	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

Spectrum neon orange PLA Crystal filament 1.75mm, 1kg

Zoom in

1
0

Description The Spectrum Crystal PLA is specially designed for anyone who wants to make transparent and semi-transparent 3D prints. This filament has a clarity that cannot be achieved with normal non-transparent PLA. This makes the filament very suitable for various types of projects, such as jewellery or decorative models. Spectrum PLA Crystal has an increased flow rate of 30%, which makes printing more precise and smoother. In addition, this filament has a temperature resistance of up to 60˚C. This is a 1.75mm neon orange filament on a 1kg spool.

Tip: Play with the temperature and print speed to get your 3D print semi-transparent or semi-matte.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	orange	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	-	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

Spectrum Premium PLA filament 1.75mm, 0.25kg (5-pack)

Zoom in

1
0

Description This 5-pack of Spectrum Premium PLA contains 5 x 0.25kg filament. This allows you to use multiple colours for your 3D prints at a low cost. In this pack you will find the following colours:

Premium PLA Polar White
Premium PLA Deep Black
Premium PLA Lion Orange
Premium PLA Pacific Blue
Premium PLA Lime Green

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	1.25 kg	Packing group:	NO
Brand:	Spectrum	Is liquid:	no
Filament diameter:	1.75 mm

€40.50 (Incl. 23% VAT)
(€32.93 Excl. 23% VAT)

5-7 day delivery

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this tomorrow!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this tomorrow!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this tomorrow!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this tomorrow!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this tomorrow!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this tomorrow!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this tomorrow!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-225 °C
Amount:	0.1 kg	Our item no:	DFR00000
Brand:	123-3D	Tunnel code:	N/A
Colour:	neutral	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this tomorrow!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this tomorrow!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this tomorrow!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Colour:	white	Packing group:	NO
Dimensions:	237 x 271 x 100 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	274 x 265 x 118 mm	Is liquid:	no
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

Order now, we can ship this tomorrow!

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Manual:	Download (PDF)	Is liquid:	no
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg
Our item no:	DAR00634

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

5-7 day delivery

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	white	Is liquid:	no
Our item no:	DRW00069

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

5-7 day delivery

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

Order now, we can ship this tomorrow!

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

SUNLU filament connector Pre-Order

Zoom in

Description Pre-Order: This item is expected in early October.

Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

*Please note that all pre-order delivery dates are subject to change without warning. You can cancel your order for a refund at any time prior to delivery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Orange

1.75mm Orange PLA Filament

View other colours:

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Orange

1.75mm Orange PLA Filament

View other colours: