Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

REAL white PC-ABS filament 2.85mm, 1kg DFA02060

Description The white PC-ABS (polycarbonate-ABS) (2.85mm) is an incredibly strong material for 3D printing. The filament is based on ABS and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle sheen. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimate Maker

Specifications

Hazard class:	N/A	Our item no:	DFA02060
Amount:	1 kg	RAL colour no:	9003
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95-105 °C	Spool width:	8.0 cm
Length:	150 m	Tunnel code:	N/A
Material:	PC ABS	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	260-280 °C

€67.50 (Incl. 23% VAT)
(€54.88 Excl. 23% VAT)

5-7 day delivery

REAL black PC-ABS filament 2.85mm, 1kg

Zoom in

Description The black PC-ABS (polycarbonate-ABS) (2.85mm) is an incredibly strong material for 3D printing. The filament is based on ABS and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle sheen. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimate maker

Specifications

Hazard class:	N/A	Our item no:	DFA02058
Amount:	1 kg	RAL colour no:	9017
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95-105 °C	Spool width:	8.0 cm
Length:	150 m	Tunnel code:	N/A
Material:	PC ABS	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	260-280 °C

Order now, we can ship this tomorrow!

€67.50 (Incl. 23% VAT)
(€54.88 Excl. 23% VAT)

in stock

Magigoo Pro 3D glue stick for PC filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with PC filament. The adhesive stick ensures perfect adhesion of PC-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! You use the Magigoo PC glue stick on glass and plastic surfaces. The package contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00208	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

€24.75 (Incl. 23% VAT)
(€20.12 Excl. 23% VAT)

5-7 day delivery

123-3D ABS pellets, 1kg

Zoom in

Description ABS pellets can be used by enthusiastic DIY'ers to make ABS filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have yet been added.

Specifications

Hazard class:	N/A	Our item no:	DPL00001
Amount:	1 kg	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	neutral	Is liquid:	no

Order now, we can ship this tomorrow!

€11.50 (Incl. 23% VAT)
(€9.35 Excl. 23% VAT)

in stock

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this tomorrow!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

123-3D kapton sticker, 200mm x 200mm

Zoom in

Description Kapton (polyimide) is an electrically insulating, heat-resistant material. These 200mm x 200mm stickers are ideal for covering the heated bed of the 3D printer to limit the warping of ABS and other filament types as much as possible. With these stickers you no longer have to draw precise lines with the loose tape.

Specifications

Hazard class:	N/A	Thickness:	0.06 mm
Brand:	123-3D	Tunnel code:	N/A
Length:	20 cm	Packing group:	NO
Material:	polyimide	Is liquid:	no
Our item no:	DVB00002	Width:	20 cm
Temp resistance:	Kapton

Order now, we can ship this tomorrow!

€3.25 (Incl. 23% VAT)
(€2.64 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this tomorrow!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this tomorrow!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

123-3D kapton sticker, 300mm x 300mm

Zoom in

Description Kapton (polyimide) is an electrically insulating, heat-resistant material. These 300mm x 300mm stickers are ideal for covering the heated bed of the 3D printer to limit the warping of ABS and other filament types as much as possible. With these stickers you no longer have to draw precise lines with the loose tape.

Specifications

Hazard class:	N/A	Thickness:	0.06 mm
Brand:	123-3D	Tunnel code:	N/A
Length:	30 cm	Packing group:	NO
Material:	polyimide	Is liquid:	no
Our item no:	DVB00003	Width:	30 cm
Temp resistance:	Kapton

Order now, we can ship this tomorrow!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

123-3D kapton sticker, 400mm x 400mm

Zoom in

Description Kapton (polyimide) is an electrically insulating, heat-resistant material. These 400mm x 400mm stickers are ideal for covering the heated bed of the 3D printer to limit the warping of ABS and other filament types as much as possible. With these stickers you no longer have to draw precise lines with the loose tape.

Specifications

Hazard class:	N/A	Thickness:	0.06 mm
Brand:	123-3D	Tunnel code:	N/A
Length:	40 cm	Packing group:	NO
Material:	polyimide	Is liquid:	no
Our item no:	DVB00004	Width:	40 cm
Temp resistance:	Kapton

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this tomorrow!

€6.25 (Incl. 23% VAT)
(€5.08 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this tomorrow!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this tomorrow!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

123-3D kapton tape, 100mm x 33m

Zoom in

Description Kapton tape (polyimide tape) is an electrically insulating heat-resistant tape. This tape is extremely suitable for covering the heated bed of the 3D printer to limit the warping of ABS and other filament types as much as possible.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Our item no:	DVB00001	Is liquid:	no
Temp resistance:	Kapton

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this tomorrow!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this tomorrow!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this tomorrow!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

REAL neutral PVA Pro filament 2.85mm, 0.5kg

Zoom in

Description The neutral PVA Pro is the ideal support filament (2.85mm) for ABS. This material is suitable for printing temperatures up to 250°C. PVA Pro adheres perfectly to ABS, ASA and TPU98A. The material dissolves slowly, but completely, in lukewarm, running water. This makes it possible to create cavities and floating parts in your ABS 3D prints.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	235-255 °C
Amount:	0.5 kg	Our item no:	DFV02005
Brand:	REAL	Roundness:	above 95 percent
Colour:	neutral	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Spool width:	4.5 cm
Length:	60 m	Tunnel code:	N/A
Material:	PVA Pro	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€57.50 (Incl. 23% VAT)
(€46.75 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this tomorrow!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Magigoo 3D Pro glue stick kit for ABS, PA, PC and PP filament

Zoom in

Description This kit contains four Magigoo 3D glue sticks. The Magigoo 3D Pro glue stick kit is suitable for printing with ABS, PA, PC and PP filament. The sticks ensure perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, you can simply remove it. The glue sticks are easy to use and prevent warping of prints.

Specifications

Hazard class:	N/A	Type:	glue stick
Brand:	Magigoo	Packing group:	NO
Our item no:	DCP00211	Is liquid:	no
Tunnel code:	N/A

Order now, we can ship this tomorrow!

€81.50 (Incl. 23% VAT)
(€66.26 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Zortrax Apoller

Zoom in

Description The Zortrax Apoller is an intelligent finishing device for the automatic smoothing of FDM 3D models. The device evens out all surfaces with butanone (MEK) or acetone vapours and in this way removes the visible layers of the 3D objects. The Zortrax Apoller is fast, safe and easy to use. Place the models in the sealed workspace 2-3cm apart and easily select the right settings with the intuitive touchscreen. The 3D objects are ready within three hours. Compatible with ABS, HIPS and ASA filaments, this smart grader maintains the dimensional accuracy and detail of your 3D printed models.

Specifications

Brand:	Zortrax	Our item no:	DAR00309
Input voltage:	110-240V

This product is end of life.

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this tomorrow!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

2.85mm PC ABS

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

2.85mm PC ABS