Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D blue flexible TPE filament 2.85mm, 0.5kg

Description The blue TPE flexible filament from 123-3D.ie has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-260 °C
Amount:	0.5 kg	Our item no:	DFF08009
Brand:	123-3D	RAL colour no:	5002
Colour:	blue	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Hardness:	45D	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-95 °C	Spool width:	5.5 cm
Length:	70 m	Tunnel code:	N/A
Material:	TPE	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

This product is end of life.

123-3D red flexible TPE filament 2.85mm, 0.5kg

Zoom in

Description The red TPE flexible filament from 123-3D.ie has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-260 °C
Amount:	0.5 kg	Our item no:	DFF08008
Brand:	123-3D	RAL colour no:	3020
Colour:	red	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Hardness:	45D	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-95 °C	Spool width:	5.5 cm
Length:	70 m	Tunnel code:	N/A
Material:	TPE	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

5-7 day delivery

123-3D transparent flexible TPE filament 2.85mm, 0.5kg

Zoom in

Description The transparent TPE flexible filament from 123-3D.ie has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-260 °C
Amount:	0.5 kg	Our item no:	DFF08005
Brand:	123-3D	Roundness:	above 95 percent
Colour:	neutral	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:	45D	Spool width:	5.5 cm
Heated bed temp:	0-95 °C	Tunnel code:	N/A
Length:	70 m	Packing group:	NO
Material:	TPE	Is liquid:	no
Max deviation:	+mn ± 0.10 mm

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

5-7 day delivery

123-3D white TPE Filament 2.85mm, 0.5kg

Zoom in

Description The white TPE flexible filaments from 123-3D.ie have the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-260 °C
Amount:	0.5 kg	Our item no:	DFF08007
Brand:	123-3D	RAL colour no:	9003
Colour:	white	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Hardness:	45D	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-95 °C	Spool width:	5.5 cm
Length:	70 m	Tunnel code:	N/A
Material:	TPE	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

5-7 day delivery

123-3D black flexible TPE filament 2.85mm, 0.5kg

Zoom in

Description The black TPE flexible filament from 123-3D.ie has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-260 °C
Amount:	0.5 kg	Our item no:	DFF08006
Brand:	123-3D	RAL colour no:	9017
Colour:	black	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Hardness:	45D	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-95 °C	Spool width:	5.5 cm
Length:	70 m	Tunnel code:	N/A
Material:	TPE	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

This product is end of life.

NinjaTek Cheetah Fire TPU SemiFlex filament 3mm, 0.5kg

Zoom in

Description This Fire red Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02039
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	SEMIFLEX	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah fire red TPU filament 3mm, 1kg

Zoom in

Description This fire red SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	1 kg	Our item no:	DFF02048
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	95A	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€69.50 (Incl. 23% VAT)
(€56.50 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah Grass TPU SemiFlex filament 3mm, 0.5kg

Zoom in

Description This Grass green Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02041
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	SEMIFLEX	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

This product is end of life.

NinjaTek Cheetah grass green TPU filament 3mm, 1kg

Zoom in

Description This grass green Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Cheetah can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable. The Cheetah filament is best printed on the ABS settings of your 3D printer.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230-250 °C
Colour:	green	Our item no:	DFF02052
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Spool width:	5.5 cm

This product is end of life.

NinjaTek Cheetah Lava TPU SemiFlex filament 3mm, 0.5kg

Zoom in

Description This Lava orange Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02040
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	SEMIFLEX	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah lava orange TPU filament 3mm, 1kg

Zoom in

Description This 'Lava' orange Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Cheetah can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable. The Cheetah filament is best printed on the ABS settings of your 3D printer.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFF02054
Amount:	1 kg	Inner diameter:	Ø 5.1 cm
Brand:	NinjaTek	Outer diameter:	Ø 20.0 cm
Colour:	orange	Spool width:	5.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	-	Is liquid:	no
Nozzle temp range:	230-250 °C

€69.50 (Incl. 23% VAT)
(€56.50 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah Midnight TPU SemiFlex filament 3mm, 0.5kg

Zoom in

Description This Midnight black SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02022
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	SEMIFLEX	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah midnight black TPU filament 3mm, 1kg

Zoom in

Description This 'Midnight' black Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	1 kg	Our item no:	DFF02047
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	SEMIFLEX	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah sapphire blue TPU filament 3mm, 0.5kg

Zoom in

Description This sapphire blue Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02057
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	95A	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah Sapphire TPU SemiFlex filament 3mm, 0.75kg

Zoom in

Description This Sapphire blue SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.75 kg	Our item no:	DFF02025
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	SEMIFLEX	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Length:	94 m	Is liquid:	no
Material:	TPU

€57.50 (Incl. 23% VAT)
(€46.75 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah sapphire blue TPU filament 3mm, 1kg

Zoom in

Description This sapphire blue Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230-250 °C
Colour:	blue	Our item no:	DFF02058
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Spool width:	5.5 cm

This product is end of life.

NinjaTek Cheetah Snow TPU SemiFlex filament 3mm, 0.5kg

Zoom in

Description This Snow white Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 85A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02044
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	95A	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah sun yellow TPU filament 3mm, 0.5kg

Zoom in

Description This sun yellow SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02065
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	95A	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

NinjaTek Cheetah sun yellow TPU filament 3mm, 1kg

Zoom in

Description This sun yellow SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	1 kg	Our item no:	DFF02066
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	95A	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€69.50 (Incl. 23% VAT)
(€56.50 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah water neutral TPU filament 3mm, 0.5kg

Zoom in

Description This semi-transparent SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02067
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	95A	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah Water TPU SemiFlex filament 3mm, 0.75kg

Zoom in

Description This Water semi-transparent Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.75 kg	Our item no:	DFF02042
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	SEMIFLEX	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Length:	94 m	Is liquid:	no
Material:	TPU

€57.50 (Incl. 23% VAT)
(€46.75 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah water neutral TPU filament 3mm, 1kg

Zoom in

Description This semi-transparent SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	1 kg	Our item no:	DFF02068
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	95A	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

This product is end of life.

NinjaTek Cheetah neon green TPU filament 3mm, 0.5kg

Zoom in

Description This neon green glow in the dark SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230-250 °C
Colour:	green glow in the dark	Our item no:	DFF02056
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Spool width:	5.5 cm

This product is end of life.

NinjaTek Cheetah steel grey TPU filament 3mm, 0.5kg

Zoom in

Description This steel silver/grey SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFF02061
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	industrial grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	95A	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Material:	TPU	Is liquid:	no

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent TPU 85A filament 2.85mm, 0.75kg

Zoom in

Description This transparent BASF Ultrafuse filament with a diameter of 2.85mm consists of high-quality TPU. Thanks to the shore hardness of 85A, this material is very strong and wear-resistant. Other advantages of the BASF Ultrafuse 85A filament are: high tensile strength, excellent damping, flexibility at low temperatures and high resistance to grease, oxygen and ozone.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 40°C.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00223
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Hardness:	NINJAFLEX	Packing group:	NO
Heated bed temp:	40 °C	Is liquid:	no
Material:	TPU 85A

€53.50 (Incl. 23% VAT)
(€43.50 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse blue TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The blue Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00211
Amount:	0.5 kg	RAL colour no:	5002
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse yellow TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00212
Amount:	0.5 kg	RAL colour no:	1003
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse green TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This green Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00213
Amount:	0.5 kg	RAL colour no:	6018
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse neutral TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The neutral colour Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFB00214
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse orange TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This orange Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00215
Amount:	0.5 kg	RAL colour no:	2008
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg

Zoom in

Description The red Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00216
Amount:	0.5 kg	RAL colour no:	3020
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFB00217
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	pink	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00218
Amount:	0.5 kg	RAL colour no:	9006
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	silver	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00219
Amount:	0.5 kg	RAL colour no:	9005
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

Magigoo Pro Flex glue stick for flexible filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with flexible filament. Flexible filament is generally more difficult to adhere to a print bed. This adhesive stick offers the solution and ensures perfect adhesion of objects printed with flexible filament. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! The package contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00212	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

€24.75 (Incl. 23% VAT)
(€20.12 Excl. 23% VAT)

5-7 day delivery

NinjaTek Cheetah Snow TPU SemiFlex filament 3mm, 0.75kg

Zoom in

Description This Snow white Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.75 kg	Our item no:	DFF02032
Brand:	NinjaTek	Inner diameter:	Ø 5.1 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.5 cm
Hardness:	SEMIFLEX	Tunnel code:	N/A
Heated bed temp:	20-50 °C	Packing group:	NO
Length:	94 m	Is liquid:	no
Material:	TPU

€57.50 (Incl. 23% VAT)
(€46.75 Excl. 23% VAT)

5-7 day delivery

REAL black TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description With this strong and flexible, black TPU filament (2.85mm), high-speed 3D printing becomes easy! This material delivers professional results, with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Nozzle temp range:	225-245 °C
Brand:	REAL	Our item no:	DFF03011
Colour:	black	RAL colour no:	9017
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Hardness:	98A	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Material:	TPU	Spool width:	4.5 cm
Max deviation:	+mn ± 0.10 mm

This product is end of life.

REAL neutral TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description This neutral (milky/white) 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimal print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30 to 40 mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	0.5 kg	Our item no:	DFF03019
Brand:	REAL	Roundness:	above 95 percent
Colour:	neutral	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:	98A	Spool width:	4.5 cm
Heated bed temp:	0-60 °C	Tunnel code:	N/A
Material:	TPU	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

REAL red TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description With this strong and flexible red TPU filament (2.85mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFF03023
Amount:	0.5 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:	98A	Spool width:	4.5 cm
Heated bed temp:	0-60 °C	Tunnel code:	N/A
Material:	TPU	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	225-245 °C

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

REAL white TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description With this strong and flexible, white TPU filament (2.85mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFF03027
Amount:	0.5 kg	RAL colour no:	9003
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:	98A	Spool width:	4.5 cm
Heated bed temp:	0-60 °C	Tunnel code:	N/A
Material:	TPU	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	225-245 °C

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

TPU pellets, 1kg (123-3D brand)

Zoom in

Description Make your own flexible filament with these TPU pellets from 123-3D!

With this high-quality transparent granulate you can now get started and determine the colour for your own unique filament. TPU is a flexible and rubber-like material, which gives it excellent resistance to high tensile forces. It has a print temperature of 200°C - 210°C. Ideal for non-slip objects or phone cases.

NOTE: The pellets should be dried before use for optimal quality.

Specifications

Hazard class:	N/A	Our item no:	DPL00007
Amount:	1 kg	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	neutral	Is liquid:	no
Material:	TPU

Order now, we can ship this today!

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

in stock

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this today!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this today!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this today!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this today!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this today!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this today!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this today!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Colour:	white	Packing group:	NO
Dimensions:	237 x 271 x 100 mm	Is liquid:	no

Order now, we can ship this today!

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	274 x 265 x 118 mm	Is liquid:	no
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

Order now, we can ship this today!

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Manual:	Download (PDF)	Is liquid:	no
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg
Our item no:	DAR00634

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

5-7 day delivery

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	white	Is liquid:	no
Our item no:	DRW00069

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

5-7 day delivery

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

Order now, we can ship this today!

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

SUNLU filament connector Pre-Order

Zoom in

Description Pre-Order: This item is expected in early October.

Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

*Please note that all pre-order delivery dates are subject to change without warning. You can cancel your order for a refund at any time prior to delivery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

2.85mm semi-flexible

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

2.85mm semi-flexible