Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

123-3D dark blue ABS filament 1.75mm, 2.3kg

Description ABS from 123-3D.ie combines all the advantages of ABS with a high degree of user-friendliness. 3D printing with ABS is easier, because the filament adheres better and warps less when printing. In addition to being lightweight and durable, 3D-printed objects are also extra strong. This is due to the higher print temperature. The dark blue 1.75mm filament can be used on any 3D printer with heated bed.

This is a large spool of 2.3kg of filament.

Read more about printing with ABS filament here.

Specifications

Hazard class:	N/A	Our item no:	DFA11054
Amount:	2.3 kg	RAL colour no:	5002
Brand:	123-3D	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	60-110 °C	Outer diameter:	Ø 30.0 cm
Colour:	dark blue	Spool width:	10.5 cm
Length:	920 m	Tunnel code:	N/A
Material:	ABS	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-260 °C

Order now, we can ship this today!

€49.50 (Incl. 23% VAT)
(€40.24 Excl. 23% VAT)

in stock

123-3D red ABS filament 1.75mm, 2.3kg

Zoom in

Description ABS from 123-3D.ie combines all the advantages of ABS with a high degree of user-friendliness. 3D printing with ABS is easier, because the filament adheres better and warps less when printing. In addition to being lightweight and durable, 3D-printed objects are also extra strong. This is due to the higher print temperature. The red 1.75mm filament can be used on any 3D printer with heated bed.

This is a large coil of 2.3kg of filament.

Read more about printing with ABS filament here.

Specifications

Hazard class:	N/A	Our item no:	DFA11055
Amount:	2.3 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	60-110 °C	Outer diameter:	Ø 30.0 cm
Colour:	Red	Spool width:	10.5 cm
Length:	920 m	Tunnel code:	N/A
Material:	ABS	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-260 °C

Order now, we can ship this today!

€49.50 (Incl. 23% VAT)
(€40.24 Excl. 23% VAT)

in stock

123-3D dark blue ABS filament 1.75mm, 3kg

Zoom in

2
1
0

Description ABS from 123-3D.ie combines all the advantages of ABS with a high degree of user-friendliness. 3D printing with ABS is easier, because the filament adheres better and warps less when printing. In addition to being lightweight and durable, 3D-printed objects are also extra strong. This is due to the higher print temperature. The dark blue 1.75mm filament can be used on any 3D printer with heated bed.

Read more about printing with ABS filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01163
Amount:	2.3 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	75-105 °C	Spool width:	10.0 cm
Colour:	dark blue	Tunnel code:	N/A
Material:	ABS	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	235-265 °C

€49.50 (Incl. 23% VAT)
(€40.24 Excl. 23% VAT)

EU warehouse

123-3D black ABS filament 1.75mm, 2.3kg

Zoom in

Description ABS from 123-3D.ie combines all the advantages of ABS with a high degree of user-friendliness. 3D printing with ABS is easier, because the filament adheres better and warps less when printing. In addition to being lightweight and durable, 3D-printed objects are also extra strong. This is due to the higher print temperature. The black 1.75mm filament can be used on any 3D printer with heated bed.

This is a large spool of 2.3kg of filament.

Read more about printing with ABS filament here.

Specifications

Hazard class:	N/A	Our item no:	DFA11052
Amount:	2.3 kg	RAL colour no:	9017
Brand:	123-3D	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	60-110 °C	Outer diameter:	Ø 30.0 cm
Colour:	Black	Spool width:	10.5 cm
Length:	920 m	Tunnel code:	N/A
Material:	ABS	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-260 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€49.50 (coming soon) (Incl. 23% VAT)
(€40.24 Excl. 23% VAT)

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Tunnel code:	D/E
Brand:	3DLAC	Packing group:	II
Diameter:	30 mm	Is liquid:	yes
Height:	150 mm	Volume:	100ml
Our item no:	DVB00018

Order now, we can ship this today!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this today!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	White	Is liquid:	no
Our item no:	DRW00069

Order now, we can ship this today!

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

in stock

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Tunnel code:	D
Brand:	3DLAC	Packing group:	NO
Diameter:	53 mm	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml
Our item no:	DVB00005

Order now, we can ship this today!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this today!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

3D Printed spool holder

Zoom in

Description This flexible solution of PLA 3D printed parts is suitable as a spool holder for various sizes of spools. Easy to use and also suitable for heavier 3kg and 5kg spools. Cardboard spools are also no problem for this spool holder.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	RepRapWorld	Packing group:	NO
Material:	PLA	Is liquid:	no
Our item no:	DFR00004

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this today!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Order now, we can ship this today!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	237 x 271 x 100 mm	Packing group:	NO
Colour:	White	Is liquid:	no

Order now, we can ship this today!

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this today!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	274 x 265 x 118 mm	Packing group:	NO
Input voltage:	100-240V	Is liquid:	no
Colour:	Black	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

Order now, we can ship this today!

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this today!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

Order now, we can ship this today!

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

eSun Pro 3 eVacuum kit

Zoom in

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	eSun	Is liquid:	no
Dimensions:	102 x 32 x 32 mm	Voltage:	5 v
Our item no:	DAR01277	Weight:	0.075 kg
Tunnel code:	N/A

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

EU warehouse

eSun eVacuum kit Pre-Order

Zoom in

1
0

Description Pre-Order: This item is expected mid-February.

The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	eSun	Packing group:	NO
Our item no:	DAR01365	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

EU warehouse

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

EU warehouse

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Dimensions:	310 x 315 x 190 mm	Is liquid:	no
Our item no:	DAR00634	Weight:	1.15 kg

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

EU warehouse

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

1.75mm ABS filament

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

1.75mm ABS filament