Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

BASF Ultrafuse blue TPC 45D filament 2.85mm, 0.5kg

Description The blue Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00211
Amount:	0.5 kg	RAL colour no:	5002
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse yellow TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00212
Amount:	0.5 kg	RAL colour no:	1003
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse green TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This green Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00213
Amount:	0.5 kg	RAL colour no:	6018
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse neutral TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The neutral colour Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFB00214
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse orange TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This orange Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00215
Amount:	0.5 kg	RAL colour no:	2008
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg

Zoom in

Description The red Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00216
Amount:	0.5 kg	RAL colour no:	3020
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFB00217
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	pink	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00218
Amount:	0.5 kg	RAL colour no:	9006
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	silver	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00219
Amount:	0.5 kg	RAL colour no:	9005
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

2.85mm TPC filament

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

2.85mm TPC filament