Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D carbon PETG filament 2.85mm, 0.5kg

Description The carbon PETG filament contains 20% carbon particles. This gives 3D printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is more resistant to heat, stiffer and more impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE08001
Brand:	123-3D	Roundness:	above 95 percent
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	5.5 cm
Length:	64 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

Delivery in New Year

REAL black PC-PETG filament 2.85mm, 0.5kg

Zoom in

Description The black PC-PETG (2.85mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	0.5 kg	Our item no:	DFE02063
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Spool width:	4.5 cm
Length:	75 m	Tunnel code:	N/A
Material:	PETG85 CARBON15	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

Delivery in New Year

REAL black PC-PETG filament 2.85mm, 1kg

Zoom in

Description The black PC-PETG (2.85mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	1 kg	Our item no:	DFE02061
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Spool width:	8.0 cm
Length:	150 m	Tunnel code:	N/A
Material:	PETG85 CARBON15	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€72.50 (Incl. 23% VAT)
(€58.94 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse black PET CF15 filament 2.85mm, 0.75kg

Zoom in

Description The black BASF PET CF15 filament (2.85mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very dimensionally stable and has a very low moisture absorption. This filament contains 15% carbon fibers. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET, but for the best result we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	245-265 °C
Amount:	0.75 kg	Our item no:	DFB00100
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PET CF15	Is liquid:	no

€78.50 (Incl. 23% VAT)
(€63.82 Excl. 23% VAT)

Delivery in New Year

E3D V6 hardened steel nozzle, 2.85mm x 0.25mm

Zoom in

Description The replacement v6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.25mm (marking #0) and is suitable for filament with a diameter of 3mm.

Specifications

Hazard class:	N/A	Our item no:	DED00059
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.25 mm

€22.50 (Incl. 23% VAT)
(€18.29 Excl. 23% VAT)

Delivery in New Year

E3D V6 hardened steel nozzle, 2.85mm x 0.30mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass version, but has a longer delivery time

This nozzle has an opening of 0.30mm (marking #1) and is suitable for filament with a diameter of 3mm.

Specifications

Hazard class:	N/A	Our item no:	DED00106
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.3 mm

€22.50 (Incl. 23% VAT)
(€18.29 Excl. 23% VAT)

Delivery in New Year

E3D V6 hardened steel nozzle, 2.85mm x 0.35mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass version, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.35mm (marking #2) and is suitable for filament with a diameter of 3mm.

Specifications

Hazard class:	N/A	Our item no:	DED00137
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.35 mm

€22.50 (Incl. 23% VAT)
(€18.29 Excl. 23% VAT)

Delivery in New Year

E3D V6 hardened steel nozzle, 2.85mm x 0.40mm

Zoom in

Description The replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 3mm.

Specifications

Hazard class:	N/A	Our item no:	DED00060
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.4 mm

€22.50 (Incl. 23% VAT)
(€18.29 Excl. 23% VAT)

Delivery in New Year

E3D V6 hardened steel nozzle, 2.85mm x 0.50mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass version, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.5mm (marking #6) and is suitable for filament with a diameter of 3mm.

Specifications

Hazard class:	N/A	Our item no:	DED00138
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.5 mm

€22.50 (Incl. 23% VAT)
(€18.29 Excl. 23% VAT)

Delivery in New Year

E3D V6 hardened steel nozzle, 2.85mm x 0.80mm

Zoom in

Description The replacement v6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 3mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DED00061
Material:	steel	Screwthread type:	M6
Nozzle coating:	none

This product is end of life.

Hygrometer round

Zoom in

Description In addition to a moisture percentage, the round hygrometer also displays the temperature. Its round shape makes it easy to install. The hygrometer is ideal for making a filament storage box.

The hygrometer is delivered without battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	black	Is liquid:	no
Our item no:	DRW00020

Order now, we can ship this on Monday!

€6.75 (Incl. 23% VAT)
(€5.49 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

2.85mm PETG carbon

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

2.85mm PETG carbon