Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Order a black PLA bundle!

In stock €98.00

Super Lube

€8.25

Hot end copper cleaning brush

Hot end copper cleaning brush

€3.95

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

€7.75

Home
3D filament
Filament type
PLA
1.75mm PLA marble

1 - 24 of 33

123-3D marble PLA filament 1.75mm, 1.1kg

123-3D marble PLA filament 1.75mm, 1.1kg DFP01143

2
1
0

Description Our marble 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01143
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	marble	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA mineral	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this tomorrow!

€28.50 20% discount:

€22.80 (Incl. 23% VAT)
(€18.54 Excl. 23% VAT)

in stock

123-3D sand PLA filament 1.75mm, 1.1kg

123-3D sand PLA filament 1.75mm, 1.1kg DFP01152

2
1
0

Description Our sand 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01152
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	beige	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA mineral	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this tomorrow!

€28.50 20% discount:

€22.80 (Incl. 23% VAT)
(€18.54 Excl. 23% VAT)

in stock

colorFabb light grey Stonefill filament 1.75mm, 0.7kg

colorFabb light grey Stonefill filament 1.75mm, 0.7kg DFP13205

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This light grey colorFabb filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Nozzle temp range:	195-220 °C
Amount:	0.7 kg	Our item no:	DFP13205
Brand:	colorFabb	Inner diameter:	Ø 5.2 cm
Colour:	light grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.5 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	50-60 °C	Packing group:	NO
Material:	stone fill	Is liquid:	no
Max deviation:	+mn ± 0.05 mm

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

Delivery in New Year

colorFabb moss green Stonefill filament 1.75mm, 0.7kg

colorFabb moss green Stonefill filament 1.75mm, 0.7kg DFP13237

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour moss green has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Nozzle temp range:	195-220 °C
Amount:	0.7 kg	Our item no:	DFP13237
Brand:	colorFabb	Inner diameter:	Ø 5.2 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.5 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	50-60 °C	Packing group:	NO
Material:	stone fill	Is liquid:	no
Max deviation:	+mn ± 0.05 mm

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

Delivery in New Year

colorFabb red brick Stonefill filament 1.75mm, 0.7kg

colorFabb red brick Stonefill filament 1.75mm, 0.7kg DFP13235

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder is added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour 'red brick' has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Nozzle temp range:	195-220 °C
Amount:	0.7 kg	Our item no:	DFP13235
Brand:	colorFabb	Inner diameter:	Ø 5.2 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.5 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	50-60 °C	Packing group:	NO
Material:	stone fill	Is liquid:	no
Max deviation:	+mn ± 0.05 mm

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

Delivery in New Year

eSun eMarble white PLA filament 1.75mm, 1kg

eSun eMarble white PLA filament 1.75mm, 1kg EMARBLE175N1 DFE20061

Description The white eMarble filament from eSun has a marble appearance. You can easily print the material with your 3D printer. This eSun eMarble PLA filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20061
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	marble	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA EMARBLE	Is liquid:	no
Nozzle temp range:	180-210 °C

Order now, we can ship this tomorrow!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

Polymaker PolyTerra marble-white PLA filament 1.75mm, 1kg

Polymaker PolyTerra marble-white PLA filament 1.75mm, 1kg 70941 DFP14234

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'marble-white' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14234
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	marble white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

Order now, we can ship this tomorrow!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

SUNLU marble PLA filament 1.75mm, 1kg

SUNLU marble PLA filament 1.75mm, 1kg DFP00171

Description With 1.75mm marble PLA filament you give your prints a unique appearance. Create objects with a realistic marble look, such as busts, sculptures or miniatures of buildings. The PLA filament is easy to print with (without a heated bed) and ensures that you do not suffer from distortion and warping of prints.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-230
Amount:	1 kg	Our item no:	DFP00171
Brand:	SUNLU	Roundness:	above 95 percent
Colour:	marble	Inner diameter:	Ø 7.3 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 19.6 cm
Heated bed temp:	0-30 °C	Spool width:	6.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Spectrum Stone Age dark PLA filament 1.75mm, 1kg

Spectrum Stone Age dark PLA filament 1.75mm, 1kg 80073 DFS10052

1
0

Description Create 3D prints that look like they are made of stone with Stone Age Dark PLA from Spectrum. Thanks to the stone look of this filament, the layer lines are also less visible. This makes PLA Stone Age very suitable for making decorative and architectural models. This filament is 1.75mm and comes on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-225 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	grey	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	stone fill	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

Delivery in New Year

Spectrum Stone Age light PLA filament 1.75mm, 1kg

Spectrum Stone Age light PLA filament 1.75mm, 1kg 80074 DFS10053

1
0

Description Create 3D prints that look like they are made of stone with Stone Age Light PLA from Spectrum. Thanks to the stone look of this filament, the layer lines are also less visible. This makes PLA Stone Age very suitable for making decorative and architectural models. This filament is 1.75mm and comes on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-225 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	grey	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	stone fill	Is liquid:	no

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

Delivery in New Year

Transparent acrylic filament coil holder kit

123-3D Transparent acrylic filament coil holder kit DFR00002

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

3DLAC stick, 80ml DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this tomorrow!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

123-3D Black acrylic filament coil holder kit DFR00003

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this tomorrow!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

3D print post-processing set

123-3D 3D print post-processing set DAR00620

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this tomorrow!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool MODIFI3DPRO DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

Delivery in New Year

Smooth-On XTC-3D coating (181 gr = A+B)

SmoothOn Smooth-On XTC-3D coating (181 gr = A+B) DAR00876

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this tomorrow!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

123-3D PLA pellets, 1kg

123-3D PLA pellets, 1kg DPL00000

Description PLA pellets can be used by enthusiastic DIY'ers to make PLA filament themselves. The pellets can also be used with a direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have yet been added.

Specifications

Hazard class:	N/A	Our item no:	DPL00000
Amount:	1 kg	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	neutral	Is liquid:	no
Material:	PLA

Order now, we can ship this tomorrow!

€15.00 20% discount:

€12.00 (Incl. 23% VAT)
(€9.76 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

SmoothOn Smooth-On XTC-3D coating (644 gr = A+B) DAR00877

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this tomorrow!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this tomorrow!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

123-3D Filament Spool Holder DFR00005

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this tomorrow!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

3DLAC adhesive spray, 400ml

3DLAC adhesive spray, 400ml DVB00005

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this tomorrow!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this tomorrow!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml MO2016 DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

© 2024 - 123-3d.ie