Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D neutral PLA filament 1.75mm, 1.1kg

2
1
0

Description Our neutral 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01078
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this today!

€24.50 20% discount:

€19.60 (Incl. 23% VAT)
(€15.93 Excl. 23% VAT)

in stock

123-3D transparent PETG filament 1.75mm, 3kg

Zoom in

2
1
0

Description This transparent PETG filament is ideal for sturdy prints. It is less brittle and easier to print than other PETG filaments. In addition, it has good mechanical properties, such as more elasticity, higher resistance to impact, better adhesion between layers and more resistance to temperature changes than PLA. This filament has a diameter of 1.75mm and there is 3kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01112
Amount:	3 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	transparent	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Spool width:	10.0 cm
Heated bed temp:	65-85 °C	Tunnel code:	N/A
Material:	PETG Transparant	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	225-245 °C

€81.50 20% discount:

€65.20 (Incl. 23% VAT)
(€53.01 Excl. 23% VAT)

5-7 day delivery

123-3D green PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description

PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. This green 1.75mm PETG filament is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01114
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	65-85 °C	Spool width:	6.8 cm
Material:	PETG Transparant	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	225-245 °C	Is liquid:	no

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

REAL transparent yellow PETG filament 1.75mm, 1kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02008
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL transparent red PETG filament 1.75mm, 1kg

Zoom in

Description The red transparent PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here .

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02002
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL transparent PETG filament 1.75mm, 1kg

Zoom in

Description The transparent PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02000
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL transperent PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The transparent PETG filament (1.75 mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here .

Specifications

Hazard class:	N/A	Our item no:	DFP02217
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	transparent	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG Transparant	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

REAL transparent blue PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02043
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description The blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Using a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02001
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL transparent yellow PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent yellow PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02038
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent green PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent green PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02039
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent green	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent green PETG filament 1.75mm, 1kg

Zoom in

3
2
1
0

Description The green PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02366
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG Transparant	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

REAL transparent orange PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent orange PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02036
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent orange PETG filament 1.75mm, 1kg

Zoom in

Description This transparent orange PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02024
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this today!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL transparent red PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The red PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02230
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG Transparant	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

XYZprinting transparent yellow PLA filament 1.75mm, 0.6kg (Refill)

Zoom in

Description With this transparent yellow XYZprinting PLA filament you can easily print all kinds of objects. The filament is equipped with the XYZ chip so that it integrates perfectly with the following XYZ da Vinci printers:

da Vinci 1.0A
da Vinci 2.0A Duo
da Vinci 1.0 AiO

Supplied without cartridge. See the manual for replacing the coil here.

NB:
this filament does not work on the da Vinci Junior and Mini. Click here for the Junior and Mini filament.

Specifications

Hazard class:	N/A	Our item no:	DFP05020
Amount:	0.6 kg	Inner diameter:	Ø 5.0 cm
Brand:	XYZprinting	Outer diameter:	Ø 16.8 cm
Colour:	transparent yellow	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	195-215 °C

This product is end of life.

XYZprinting transparent green PLA filament 1.75mm, 0.6kg (Cartridge)

Zoom in

Description With this transparent green XYZprinting PLA filament you can easily print all kinds of objects. The filament is equipped with the XYZ chip and is contained in a cartridge so that it integrates perfectly with the following XYZ da Vinci printers:

da Vinci 1.0A
da Vinci 2.0A Duo
da Vinci 1.0 AiO

NB:
this filament does not work on the da Vinci Junior and Mini. Click here for the Junior and Mini filament.

Specifications

Hazard class:	N/A	Material:	PLA
Amount:	0.6 kg	Nozzle temp range:	195-215 °C
Brand:	XYZprinting	Our item no:	DFP05010
Colour:	transparent green	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Heated bed temp:	0-45 °C	Is liquid:	no

This product is end of life.

XYZprinting transparent red PLA filament 1.75mm, 0.6kg (Cartridge)

Zoom in

Description With this transparent red XYZprinting PLA filament you can easily print all kinds of objects. The filament is equipped with the XYZ chip and is contained in a cartridge so that it integrates perfectly with the following XYZ da Vinci printers:

da Vinci 1.0A
da Vinci 2.0A Duo
da Vinci 1.0 AiO

NB:
this filament does not work on the da Vinci Junior and Mini. Click here for the Junior and Mini filament.

Specifications

Hazard class:	N/A	Material:	PLA
Amount:	0.6 kg	Nozzle temp range:	195-215 °C
Brand:	XYZprinting	Our item no:	DFP05012
Colour:	red	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Heated bed temp:	0-45 °C	Is liquid:	no

This product is end of life.

Zortrax neutral transparent Z-GLASS filament 1.75mm, 0.8kg

Description With Zortrax Z-GLASS filament in natural you print transparent objects. With this material you can replace brittle glass with a resilient thermoplastic. Printed objects can withstand exposure to salt, acid and solvents. Ideal when you want to print prototypes for the automotive industry, for example. The transparent filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Amount:	0.8 kg	Nozzle temp range:	235-245 °C
Brand:	Zortrax	Our item no:	DFP00139
Colour:	transparent neutral	Inner diameter:	Ø 0.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 0.0 cm
Heated bed temp:	0-30 °C	Spool width:	0.0 cm
Material:	Z Glass

This product is end of life.

Zortrax neutral transparent Z-GLASS filament 1.75mm, 2kg

Zoom in

Description With this neutral Zortrax Z-GLASS filament you can print transparent. With this filament you can replace fragile glass with sturdy thermoplastic. Printed objects are resistant to salt, acid and solvents. Ideal for printing prototypes for various applications. The filament has a diametre of 1.75mm and a weight of 2000g.

Specifications

Hazard class:	N/A	Our item no:	DFP00138
Amount:	2 kg	Inner diameter:	Ø 5.5 cm
Brand:	Zortrax	Outer diameter:	Ø 28.0 cm
Colour:	transparent neutral	Spool width:	7.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	Z Glass	Is liquid:	no
Nozzle temp range:	235-245 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€107.50 (coming soon) (Incl. 23% VAT)
(€87.40 Excl. 23% VAT)

BASF Ultrafuse transparent PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00059
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent PET filament 1.75mm, 2.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	2.5 kg	Our item no:	DFB00066
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	neutral	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€83.00 (Incl. 23% VAT)
(€67.48 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent PET filament 1.75mm, 4.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	4.5 kg	Our item no:	DFB00069
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	neutral	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€134.00 (Incl. 23% VAT)
(€108.94 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent PET filament 1.75mm, 8.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	8.5 kg	Our item no:	DFB00072
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	neutral	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€257.00 (Incl. 23% VAT)
(€208.94 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent blue PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent blue BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Our item no:	DFB00051
Amount:	0.75 kg	RAL colour no:	5002
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent green PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent green BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Our item no:	DFB00061
Amount:	0.75 kg	RAL colour no:	6018
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent TPU 85A filament 1.75mm, 0.75kg

Zoom in

Description The transparent BASF Ultrafuse filament with a diameter of 1.75mm consists of high-quality TPU. Thanks to the shore hardness of 85A, this material is very strong and wear-resistant. Other advantages of the BASF Ultrafuse 85A filament are: a high tensile strength, excellent damping, flexibility at low temperatures and high resistance to grease, oxygen and ozone.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 40°C.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00222
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Hardness:	NINJAFLEX	Packing group:	NO
Heated bed temp:	40 °C	Is liquid:	no
Material:	TPU 85A

Order now, we can ship this today!

€53.50 (Incl. 23% VAT)
(€43.50 Excl. 23% VAT)

in stock

colorFabb transparent HT filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb transparent filament has a diameter of 1.75mm. HT filament is odourless and has good firmness. This type of filament is known for its very high temperature resistance up to 100°C. Compared to other copolyester filaments from colorFabb, you achieve the best mechanical performance with HT filament.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.7 kg	Nozzle temp range:	250-280 °C
Brand:	colorFabb	Our item no:	DFP13006
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	100-120 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	HT	Is liquid:	no

This product is end of life.

colorFabb transparent NGEN filament 1.75mm, 0.75kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform from 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	220-240 °C
Brand:	colorFabb	Our item no:	DFP13028
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	75-85 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	NGEN	Is liquid:	no

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

colorFabb transparent NGEN FLEX filament 1.75mm, 0.65kg

Zoom in

Description This transparent colorFabb NGEN Flex is a semi-flexible filament with a shore hardness of 95A. NGEN Flex is perfect for printing functional parts that need to be hidden. The transparent filament is fed through a Bowden tube and can be printed at normal speeds. In addition, NGEN Flex can withstand temperatures up to 125°C.

Printing advice: combine the filament with one of our Creality housings.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13060
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	40-60 mm/s	Spool width:	5.5 cm
Heated bed temp:	75-85 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	NGEN flex	Is liquid:	no

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

colorFabb transparent PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13075
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

colorFabb transparent PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing of strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13074
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

5-7 day delivery

colorFabb transparent green PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in transparent green. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. You can create striking prints with this transparent green color. This filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13108
Colour:	transparent green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PLA matte	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

colorFabb transparent red PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in transparent red. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. You can create striking prints with this transparent red color. This filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13112
Colour:	transparent red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PLA matte	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

colorFabb transparent violet PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in transparent violet. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. You can create striking prints with this intense violet colour. This filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13114
Colour:	transparent violet	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PLA matte	Is liquid:	no

Order now, we can ship this today!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

colorFabb transparent XT filament 1.75mm, 0.75kg

Zoom in

Description This transparent XT filament from colorFabb has a diameter of 1.75mm and is very user-friendly. When you print with this extra sturdy material, there are few odours released. All your objects come out of the 3D printer shiny, detailed and stylish.

The ideal printing temperature is 240°C to 260°C. For best results, use a heated bed set at a temperature of 60°C to 70°C.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13177
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	60-70 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	XT	Is liquid:	no

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

Dremel transparent PLA filament 1.75mm, 0.75kg

Zoom in

Description Create detailed 3D prints with a high-quality finish with this transparent PLA filament from Dremel.

This biodegradable PLA filament is an extremely popular and user-friendly filament type. Ideal for producing visually appealing 3D objects that require little force. In addition, this filament also has a slightly higher print temperature (220°C) than regular PLA and an optimal bed temperature of 35°C. With a diameter of 1.75mm it is compatible with almost all 3D printers.

In addition, the coil is equipped with an RFID chip, so that your Dremel printer automatically uses the correct settings. The perfect material for beginners and experts!

Specifications

Hazard class:	N/A	Our item no:	DCP00189
Amount:	0.75 kg	Inner diameter:	Ø 1.9 cm
Brand:	Dremel	Outer diameter:	Ø 18.0 cm
Colour:	transparent	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	200-240 °C

€41.50 (Incl. 23% VAT)
(€33.74 Excl. 23% VAT)

5-7 day delivery

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this today!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

5-7 day delivery

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this today!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this today!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this today!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this today!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this today!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this today!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Colour:	white	Packing group:	NO
Dimensions:	237 x 271 x 100 mm	Is liquid:	no

Order now, we can ship this today!

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	274 x 265 x 118 mm	Is liquid:	no
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

Order now, we can ship this today!

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Manual:	Download (PDF)	Is liquid:	no
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg
Our item no:	DAR00634

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

5-7 day delivery

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	white	Is liquid:	no
Our item no:	DRW00069

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

5-7 day delivery

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

Order now, we can ship this today!

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

SUNLU filament connector Pre-Order

Zoom in

Description Pre-Order: This item is expected in early October.

Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

*Please note that all pre-order delivery dates are subject to change without warning. You can cancel your order for a refund at any time prior to delivery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

View all transparent filaments

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

View all transparent filaments