Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D carbon PETG filament 1.75mm, 0.5kg

Description The carbon PETG filament contains 20% carbon particles. This gives 3D-printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is more resistant to heat, stiffer and more impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE08000
Brand:	123-3D	Roundness:	above 95 percent
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	5.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

123-3D grey ASA filament 1.75mm, 1kg

Zoom in

2
1
0

Description This black ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01104
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

Delivery in New Year

123-3D green PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The green 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Specifications

Hazard class:	N/A	Our item no:	DFE11005
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

123-3D green PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The green 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Specifications

Hazard class:	N/A	Our item no:	DFP01176
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	65-85 °C	Spool width:	6.8 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	225-245 °C	Is liquid:	no

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

Delivery in New Year

123-3D sky blue PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example, it is a hydrophobic material that does not absorb water. The sky blue 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01175
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	sky blue	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	65-85 °C	Spool width:	6.8 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	225-245 °C	Is liquid:	no

Order now, we can ship this on Monday!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

123-3D sky blue PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example, it is a hydrophobic material that does not absorb water. The sky blue 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE11003
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	sky blue	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	325 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

Delivery in New Year

123-3D sky blue PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The sky blue 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE11024
Amount:	2.3 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	sky blue	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	750 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€64.50 (Incl. 23% VAT)
(€52.44 Excl. 23% VAT)

Delivery in New Year

123-3D neutral ASA filament 1.75mm, 1kg

Zoom in

2
1
0

Description This neutral ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01106
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	neutral	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

Order now, we can ship this on Monday!

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

in stock

123-3D red PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The red 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE11004
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	325 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

123-3D red PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The red 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE11025
Amount:	2.3 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	750 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

123-3D transparent PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11002
Brand:	123-3D	Roundness:	above 95 percent
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	325 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

123-3D tranparent PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	2.3 kg	Our item no:	DFE11030
Brand:	123-3D	Roundness:	above 95 percent
Colour:	transparent	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	750 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€64.50 (coming soon) (Incl. 23% VAT)
(€52.44 Excl. 23% VAT)

123-3D transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and user-friendly. In addition, PETG unique properties, for example, it is a hydrophobic material that does not absorb water. The blue transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11007
Brand:	123-3D	Roundness:	above 95 percent
Colour:	transparent blue	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	325 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

123-3D transparent yellow PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The yellow transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11009
Brand:	123-3D	Roundness:	above 95 percent
Colour:	transparent yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	325 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

Delivery in New Year

123-3D transparent green PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The green transparent 1.75mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11010
Brand:	123-3D	Roundness:	above 95 percent
Colour:	green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	325 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

Delivery in New Year

123-3D transparent red PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The red transparent 1.75mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11008
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	325 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

123-3D white PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The white 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01118
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	white	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	65-85 °C	Spool width:	6.8 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	225-245 °C	Is liquid:	no

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

Delivery in New Year

123-3D white PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The white 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE11023
Amount:	2.3 kg	RAL colour no:	9003
Brand:	123-3D	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	750 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€64.50 (Incl. 23% VAT)
(€52.44 Excl. 23% VAT)

in stock

123-3D black ASA filament 1.75mm, 1kg

Zoom in

2
1
0

Description This black ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01108
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

Order now, we can ship this on Monday!

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

in stock

123-3D black PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and user-friendly. In addition, PETG has completely unique properties, for example, it is a hydrophobic material that does not absorb water. The black 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE11022
Amount:	2.3 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	750 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€64.50 (Incl. 23% VAT)
(€52.44 Excl. 23% VAT)

Delivery in New Year

REAL blue Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This blue 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02012
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL blue PETG filament 1.75mm, 0.5kg

Zoom in

Description The blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02032
Brand:	REAL	Roundness:	above 95 percent
Colour:	blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL blue PETG filament 1.75mm, 1kg

Zoom in

Description The blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02014
Brand:	REAL	Roundness:	above 95 percent
Colour:	blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL blue PETG filament 1.75mm, 3kg

Zoom in

Description The blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	3 kg	Our item no:	DFE02049
Brand:	REAL	Roundness:	above 95 percent
Colour:	blue	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Length:	1,020 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

in stock

REAL blue PETG recycled filament 1.75mm, 1kg

Zoom in

2
1
0

Description his Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP02305
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	40-80 °C	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	230-250 °C

Order now, we can ship this on Monday!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

REAL blue PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	1 kg	Our item no:	DFE20143
Brand:	REAL	Roundness:	above 95 percent
Colour:	blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€34.50 (coming soon) (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

REAL fluorescent orange PETG filament 1.75mm, 1kg

Zoom in

Description The fluoresent orange REAL PETG filament (1.75mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp, for example in the disco. The filament has a perfected round shape to prevent jamming. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02053
Brand:	REAL	Roundness:	above 95 percent
Colour:	fluorescent orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL yellow Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This yellow 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02021
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL yellow PETG filament 1.75mm. 0.5kg

Zoom in

2
1
0

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02225
Amount:	0.5 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

Delivery in New Year

REAL yellow PETG filament 1.75mm, 0.5kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02035
Brand:	REAL	Roundness:	above 95 percent
Colour:	yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL yellow PETG filament 1.75mm, 1kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02020
Brand:	REAL	Roundness:	above 95 percent
Colour:	yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

REAL yellow PETG filament 1.75mm, 3kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	3 kg	Our item no:	DFE02068
Brand:	REAL	Roundness:	above 95 percent
Colour:	yellow	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Length:	1,020 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

Delivery in New Year

REAL transparent yellow PETG filament 1.75mm, 1kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02008
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

REAL grey Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This grey 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02013
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL grey PETG recycled filament 1.75mm, 1kg

Zoom in

2
1
0

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 245°C. In addition, the filament shrinks minimally and with this ultra-strong filament you have virtually no problems with warping (warping of the print). For the best results, print with a heated bed at a temperature between 40 and 75°C.

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Hazard class:	N/A	Our item no:	DFP02303
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	40-80 °C	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€35.50 (coming soon) (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

REAL grey PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	1 kg	Our item no:	DFE20146
Brand:	REAL	Roundness:	above 95 percent
Colour:	grey	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€34.50 (coming soon) (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

REAL grey-blue PETG filament 1.75mm, 0.5kg

Zoom in

Description The grey-blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02034
Brand:	REAL	Roundness:	above 95 percent
Colour:	grey/blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.50 (coming soon) (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

REAL grey-blue PETG filament 1.75mm, 1kg

Zoom in

Description This unique grey-blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. Depending on the incidence of light, this filament has a dark grey to blue colour. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02022
Brand:	REAL	Roundness:	above 95 percent
Colour:	grey/blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

REAL green Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This green 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02014
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL green PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The green PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02221
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

REAL green PETG filament 1.75mm, 1kg

Zoom in

Description The green PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02023
Brand:	REAL	Roundness:	above 95 percent
Colour:	green	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

REAL green PETG Recycled filament 1.75mm, 1kg

Zoom in

2
1
0

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP02307
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	40-80 °C	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	230-250 °C

Order now, we can ship this on Monday!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

REAL light green Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This light green 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02015
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	light green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL transparent magenta PETG filament 1.75mm, 1kg

Zoom in

Description The magenta transparent PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02027
Brand:	REAL	Roundness:	above 95 percent
Colour:	magenta	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL brass PETG filament 1.75mm, 1kg

Zoom in

Description The brass coloured PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02025
Brand:	REAL	Roundness:	above 95 percent
Colour:	brass	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

REAL neutral Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This neutral 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02016
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

REAL orange Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This orange 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02017
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL orange PETG filament 1.75mm, 0.5kg

Zoom in

Description This orange PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02045
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL orange PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description This orange PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02220
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

REAL orange PETG filament 1.75mm, 1kg

Zoom in

Description This orange PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02048
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL orange PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFE20149
Amount:	1 kg	RAL colour no:	2010
Brand:	REAL	Roundness:	above 95 percent
Colour:	orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€34.50 (coming soon) (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

REAL red Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This red 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02018
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

REAL red PETG filament 1.75mm, 0.5kg

Zoom in

Description The red PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE02033
Amount:	0.5 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL red PLA filament 1.75mm, 1kg

Zoom in

2
1
0

Description This red REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02210
Amount:	1 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	7.0 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	220-250 °C	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL red PETG filament 1.75mm, 3kg

Zoom in

Description The red PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE02050
Amount:	3 kg	RAL colour no:	3020
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Length:	1,020 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

in stock

REAL red PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	1 kg	Our item no:	DFE20152
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

Delivery in New Year

REAL transparent red PETG filament 1.75mm, 1kg

Zoom in

Description The red transparent PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here .

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02002
Brand:	REAL	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

REAL smokey black PETG filament 1.75mm, 1kg

Zoom in

Description The smoky black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02026
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL transperent PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The transparent PETG filament (1.75 mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here .

Specifications

Hazard class:	N/A	Our item no:	DFP02217
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	transparent	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG Transparant	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL transparent PETG filament 1.75mm, 1kg

Zoom in

Description The transparent PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02000
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL transparent blue PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02043
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description The blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Using a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02001
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent blue	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL transparent yellow PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent yellow PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02038
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent yellow	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent green PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent green PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02039
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent green	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent green PETG filament 1.75mm, 1kg

Zoom in

3
2
1
0

Description The green PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02366
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG Transparant	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

REAL transparent orange PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent orange PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02036
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent orange PETG filament 1.75mm, 1kg

Zoom in

Description This transparent orange PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE02024
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent orange	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL transparent red PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent red PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE02037
Brand:	REAL	Roundness:	above 95 percent
Colour:	transparent red	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL transparent red PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The red PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02230
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	30-_60 °C	Tunnel code:	N/A
Material:	PETG Transparant	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

REAL white Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This white 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02019
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL white PETG filament 1.75mm, 0.5kg

Zoom in

Description The white PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE02031
Amount:	0.5 kg	RAL colour no:	9003
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL white PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The white PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02205
Amount:	1 kg	RAL colour no:	9003
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	7.0 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	220-250 °C	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL white PETG filament 1.75mm, 3kg

Zoom in

2
1
0

Description The white PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02206
Amount:	3 kg	RAL colour no:	9003
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	220-250 °C	Is liquid:	no

€86.50 (Incl. 23% VAT)
(€70.33 Excl. 23% VAT)

Delivery in New Year

REAL white PETG filament 1.75mm, 3kg

Zoom in

Description The white PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE02047
Amount:	3 kg	RAL colour no:	9003
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Length:	1,020 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this on Monday!

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

in stock

REAL white PETG filament 1.75mm, 5kg

Zoom in

Description The white PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

With this extra large roll you can make even larger prints without having to change your roll halfway through.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	5 kg	Our item no:	DFE02067
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Length:	1,700 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€137.50 (Incl. 23% VAT)
(€111.79 Excl. 23% VAT)

in stock

REAL white PETG recycled filament 1.75mm, 1kg

Zoom in

2
1
0

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 245°C. In addition, the filament shrinks minimally and with this ultra-strong filament you have virtually no problems with warping (warping of the print). For the best results, print with a heated bed at a temperature between 40 and 75°C.

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Hazard class:	N/A	Our item no:	DFP02304
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	40-80 °C	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	230-250 °C

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

Delivery in New Year

REAL white PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	1 kg	Our item no:	DFE20155
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

REAL white PETG recycled filament 1.75mm, 5kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	5 kg	Our item no:	DFE20156
Brand:	REAL	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	40-80 °C	Spool width:	10.5 cm
Length:	1,650 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€157.50 (Incl. 23% VAT)
(€128.05 Excl. 23% VAT)

Delivery in New Year

REAL silver PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFE20153
Amount:	1 kg	RAL colour no:	9022
Brand:	REAL	Roundness:	above 95 percent
Colour:	silver	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	230-250 °C

Order now, we can ship this on Monday!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

REAL black Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This black 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02010
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL black ASA-CF filament 1.75mm, 1kg

Zoom in

Description ASA-CF filament from REAL has all the benefits of standard ASA with the addition of 10% carbon particles, which provides better reliability and stiffness. It is easy to print, has good bonding between layers and has a beautiful matte appearance. In addition, it is just as water, UV and heat resistant as standard ASA and prints from this material can be used perfectly outdoors. With ASA-CF you get a strong and low-shrink filament that is perfect for prints that must also be able to easily withstand different weather conditions.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-265 °C
Amount:	1 kg	Our item no:	DFS02022
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	85-115 °C	Packing group:	NO
Material:	-	Is liquid:	no

€62.50 (Incl. 23% VAT)
(€50.81 Excl. 23% VAT)

Delivery in New Year

REAL black PC-PETG filament 1.75mm, 0.5kg

Zoom in

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	0.5 kg	Our item no:	DFE02062
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG85 CARBON15	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament has PETG as a base and contains 15% carbon particles. This gives PC-PETG the optimal balance between strength, stability and optical clarity. Prints with PC-PETG are more resistant to heat and look matte and modern.

Specifications

Hazard class:	N/A	Our item no:	DFP02381
Amount:	1 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	35-60 °C	Tunnel code:	N/A
Material:	PETG Carbon	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	225-245 °C

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

Delivery in New Year

REAL black PC-PETG filament 1.75mm, 1kg

Zoom in

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	1 kg	Our item no:	DFE02060
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Spool width:	8.0 cm
Length:	340 m	Tunnel code:	N/A
Material:	PETG85 CARBON15	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€72.50 (Incl. 23% VAT)
(€58.94 Excl. 23% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 3kg

Zoom in

2
1
0

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Specifications

Hazard class:	N/A	Our item no:	DFP02382
Amount:	3 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.1 cm
Colour:	black	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Spool width:	10.5 cm
Heated bed temp:	35-60 °C	Tunnel code:	N/A
Material:	PETG Carbon	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	225-245 °C

€152.50 (Incl. 23% VAT)
(€123.98 Excl. 23% VAT)

Delivery in New Year

REAL black PC-PETG filament 1.75mm, 3kg

Zoom in

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	3 kg	Our item no:	DFP12062
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	35-60 °C	Spool width:	10.5 cm
Length:	1,020 m	Tunnel code:	N/A
Material:	PETG85 CARBON15	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€147.50 (Incl. 23% VAT)
(€119.92 Excl. 23% VAT)

Delivery in New Year

REAL black PETG filament 1.75mm. 0.5kg

Zoom in

Description The black PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02212
Amount:	0.5 kg	RAL colour no:	9017
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	7.0 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	220-250 °C	Is liquid:	no

Order now, we can ship this on Monday!

€21.50 (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

in stock

REAL black PETG filament 1.75mm, 0.5kg

Zoom in

Description The black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE02030
Amount:	0.5 kg	RAL colour no:	9017
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	4.5 cm
Length:	170 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.50 (coming soon) (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

REAL black PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02213
Amount:	1 kg	RAL colour no:	9017
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-_60 °C	Spool width:	7.0 cm
Material:	PETG	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	220-250 °C	Is liquid:	no

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

REAL black PETG filament 1.75mm, 3kg

Zoom in

Description The black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFE02046
Amount:	3 kg	RAL colour no:	9017
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Length:	1,020 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

Delivery in New Year

REAL black PETG filament 1.75mm, 5kg

Zoom in

Description The black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

With this extra large roll you can make even bigger prints without having to change your roll halfway through.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	5 kg	Our item no:	DFE02066
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	30-_60 °C	Spool width:	10.5 cm
Length:	1,700 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

REAL black PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste. PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFP02306
Amount:	1 kg	RAL colour no:	9005
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Spool width:	7.0 cm
Material:	PETG recycled	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	230-250 °C	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

Delivery in New Year

REAL black PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Our item no:	DFE20139
Amount:	1 kg	RAL colour no:	9005
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€34.50 (coming soon) (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

REAL black PETG recycled filament 1.75mm, 5kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	5 kg	Our item no:	DFE20140
Brand:	REAL	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	40-80 °C	Spool width:	10.5 cm
Length:	1,650 m	Tunnel code:	N/A
Material:	PETG recycled	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€157.50 (coming soon) (Incl. 23% VAT)
(€128.05 Excl. 23% VAT)

BASF Ultrafuse neutral ASA filament 1.75mm, 0.75kg

Zoom in

Description This neutral BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Hazard class:	N/A	Nozzle temp range:	260-280 °C
Amount:	0.75 kg	Our item no:	DFB00038
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	100-120 °C	Packing group:	NO
Material:	ASA	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse black ASA filament 1.75mm, 0.75kg

Zoom in

Description This black BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Hazard class:	N/A	Our item no:	DFB00039
Amount:	0.75 kg	RAL colour no:	9005
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	100-120 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	260-280 °C

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse black PET CF15 filament 1.75mm, 0.75kg

Zoom in

Description The black BASF PET CF15 filament (1.75mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very dimensionally stable and has a very low moisture absorption. This filament contains 15% carbon fibers. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET, but for the best result we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	245-265 °C
Amount:	0.75 kg	Our item no:	DFB00099
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PET CF15	Is liquid:	no

€78.50 (Incl. 23% VAT)
(€63.82 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse blue PET filament 1.75mm, 0.75kg

Zoom in

Description The blue BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00052
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse yellow PET filament 1.75mm, 0.75kg

Zoom in

Description The yellow BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Our item no:	DFB00053
Amount:	0.75 kg	RAL colour no:	1003
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse grey PET filament 1.75mm, 0.75kg

Zoom in

Description The grey BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	200-220 °C
Colour:	grey	Our item no:	DFB00054
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm

This product is end of life.

BASF Ultrafuse green PET filament 1.75mm, 0.75kg

Zoom in

Description The green BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00055
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse orange PET filament 1.75mm, 0.75kg

Zoom in

Description The orange BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00056
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€69.50 (coming soon) (Incl. 23% VAT)
(€56.50 Excl. 23% VAT)

BASF Ultrafuse red PET filament 1.75mm, 0.75kg

Zoom in

Description The red BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00058
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse transparent PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00059
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse transparent PET filament 1.75mm, 2.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	2.5 kg	Our item no:	DFB00066
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	neutral	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€83.00 (Incl. 23% VAT)
(€67.48 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse transparent PET filament 1.75mm, 4.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	4.5 kg	Our item no:	DFB00069
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	neutral	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€134.00 (Incl. 23% VAT)
(€108.94 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse transparent PET filament 1.75mm, 8.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	8.5 kg	Our item no:	DFB00072
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	neutral	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€257.00 (Incl. 23% VAT)
(€208.94 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse transparent blue PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent blue BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Our item no:	DFB00051
Amount:	0.75 kg	RAL colour no:	5002
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse transparent green PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent green BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Our item no:	DFB00061
Amount:	0.75 kg	RAL colour no:	6018
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse white PET filament 1.75mm, 0.75kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Our item no:	DFB00064
Amount:	0.75 kg	RAL colour no:	9010
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse white PET filament 1.75mm, 2.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	2.5 kg	Our item no:	DFB00067
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	white	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€83.00 (Incl. 23% VAT)
(€67.48 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse white PET filament 1.75mm, 4.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	4.5 kg	Our item no:	DFB00070
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	white	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€134.00 (Incl. 23% VAT)
(€108.94 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse white PET filament 1.75mm, 8.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	8.5 kg	Our item no:	DFB00073
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	white	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€257.00 (Incl. 23% VAT)
(€208.94 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse black PET filament 1.75mm, 0.75kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Our item no:	DFB00065
Amount:	0.75 kg	RAL colour no:	9005
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse black PET filament 1.75mm, 2.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	2.5 kg	Our item no:	DFB00068
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	black	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€83.00 (Incl. 23% VAT)
(€67.48 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse black PET filament 1.75mm, 4.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	4.5 kg	Our item no:	DFB00071
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	black	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€134.00 (Incl. 23% VAT)
(€108.94 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse black PET filament 1.75mm, 8.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	8.5 kg	Our item no:	DFB00074
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	black	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€257.00 (Incl. 23% VAT)
(€208.94 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse blue rPET filament 1.75mm, 0.75kg

Zoom in

Description Ultrafuse rPET filament from BSAF is made from recycled materials and is therefore very durable. The filament is just as strong as new filament and has good chemical resistance. The print temperature is between 225°C and 245°C. This blue filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Nozzle temp range:	225-245 °C
Amount:	0.75 kg	Our item no:	DFB00200
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	65-85 °C	Packing group:	NO
Material:	RPET	Is liquid:	no

€43.50 (Incl. 23% VAT)
(€35.37 Excl. 23% VAT)

Delivery in New Year

ColorFabb natural ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour natural has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance up to 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13000
Colour:	natural	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	ASA	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

Delivery in New Year

ColorFabb black ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour black has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance of 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13001
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	90 m	Packing group:	NO
Material:	ASA	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

Delivery in New Year

ColorFabb natural LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The natural LW-ASA filament from colorFabb has a diameter of 1.75mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96 degrees.

Note: the colour may vary.

Print recommendation: use a heated platform of 90-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13016
Colour:	natural	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW ASA	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

ColorFabb black LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The black LW-ASA filament from colorFabb has a diameter of 1.75mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13014
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW ASA	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

colorFabb dark grey PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This dark grey colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp less quickly. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13079
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

Order now, we can ship this on Monday!

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

in stock

colorFabb dark grey PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This dark grey colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13078
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

Order now, we can ship this on Monday!

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

in stock

colorFabb light grey PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This light grey colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13082
Colour:	light grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

Order now, we can ship this on Monday!

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

in stock

colorFabb red PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This red colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp less quickly. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13087
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

Delivery in New Year

colorFabb red PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This red colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13086
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

Delivery in New Year

colorFabb transparent PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13075
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

Delivery in New Year

colorFabb transparent PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing of strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13074
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

Delivery in New Year

colorFabb white PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This white colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing of strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp less quickly. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13091
Colour:	white	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

Delivery in New Year

colorFabb white PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This white colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing of strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13090
Colour:	white	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

Delivery in New Year

colorFabb black PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This colorFabb filament in the colour black has a diameter of 1.75mm and is ideal for 3D printing of strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp less quickly. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13071
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

Delivery in New Year

colorFabb black PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This colorFabb filament in the colour black has a diameter of 1.75mm and is ideal for 3D printing of strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13070
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PETG economy	Is liquid:	no

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

Delivery in New Year

colorFabb semi-matte black PETG filament 1.75mm, 0.75kg

Zoom in

Description

Print strong objects with colorFabb PETG filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibers are used to obtain the semi-matte effect. The filament has a diameter of 1.75mm and a weight of 0.75kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13195
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	60-70 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	PETG semi matte	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

Delivery in New Year

colorFabb semi-matte black PETG filament 1.75mm, 2.2kg

Zoom in

Description

Print strong objects with colorFabb PETG filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibers are used to obtain the semi-matte effect. The filament has a diameter of 1.75mm and a weight of 2.2kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	2.2 kg	Nozzle temp range:	235-255 °C
Brand:	colorFabb	Our item no:	DFP13197
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Filament print speed:	-	Spool width:	10.2 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Length:	750 m	Packing group:	NO
Material:	PETG semi matte	Is liquid:	no

€87.75 (Incl. 23% VAT)
(€71.34 Excl. 23% VAT)

Delivery in New Year

eSun transparent blue PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's transparent blue filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20209
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	blue	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

Delivery in New Year

eSun transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent blue PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20046
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	transparent blue	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

eSun transparent green PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent green PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20047
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	transparent green	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

eSun transparent PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's transparent filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20212
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	transparent	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Order now, we can ship this on Monday!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

eSun neutral PETG filament 1.75mm, 1kg

Zoom in

Description eSun's neutral PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20045
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	neutral	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

eSun transparent orange PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent orange PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20050
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	transparent orange	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

eSun black PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's black filament is a high quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20208
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	black	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€24.50 (coming soon) (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

eSun solid black PETG filament 1.75mm, 1kg

Zoom in

Description eSun's solid black PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20044
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	solid black	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

eSun grey PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's grey filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20210
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	grey	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

Delivery in New Year

eSun solid red PETG filament 1.75mm, 1kg

Zoom in

Description The plain red PETG filament from eSun is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20043
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	even red	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€30.50 (Incl. 23% VAT)
(€24.80 Excl. 23% VAT)

Delivery in New Year

eSun white PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's white filament is a high quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20216
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	white	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

Delivery in New Year

eSun white PETG filament 1.75mm, 1kg

Zoom in

Description eSun's white PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20051
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	white	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

eSun transparent yellow PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent yellow PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20048
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	transparent yellow	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Polymaker PolyLite black ASA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite black ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14054
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this on Monday!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 3kg

Zoom in

Description This black Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14180
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	black	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite blue ASA filament 1.75mm, 1kg

Zoom in

Description This blue Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14181
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this on Monday!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite grey ASA filament 1.75mm, 1kg

Zoom in

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14183
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this on Monday!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite natural ASA filament 1.75mm, 1kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14185
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	natural	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite natural ASA filament 1.75mm, 3kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14186
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	natural	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite red ASA filament 1.75mm, 1kg

Zoom in

Description This red Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14189
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this on Monday!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite white ASA filament 1.75mm, 1kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14056
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite white ASA filament 1.75mm, 3kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14190
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	white	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite black PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a black colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14194
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Order now, we can ship this on Monday!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite blue PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright blue colour. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14196
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite dark blue PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a dark blue colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14294
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	dark blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Order now, we can ship this on Monday!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite green PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright green colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14198
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite grey PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a grey colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14201
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Order now, we can ship this on Monday!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite orange PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright orange colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14202
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite purple PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a purple colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14205
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	purple	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyLite red PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright red colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14206
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Order now, we can ship this on Monday!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite turquoise PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear turquoise colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14208
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	turquoise	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.50 (coming soon) (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

Polymaker PolyLite transparent PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14210
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	transparent	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Order now, we can ship this on Monday!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite white PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright white colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage rate, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14212
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Order now, we can ship this on Monday!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyLite yellow PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright yellow colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14214
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

Order now, we can ship this on Monday!

€32.50 (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

in stock

Polymaker PolyMax black PETG filament 1.75mm, 0.75kg

Zoom in

Description This Polymaker PolyMax filament in the colour black has a diameter of 1.75mm and is ideal for 3D printing of strong objects. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality than ordinary PETG.

PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp less quickly. The ideal printing temperature is 230°C to 240°C. For best results, use a heated bed of 70°C to 80°C.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14094
Amount:	0.75 kg	Spool empty weight:	± 125 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	4.5 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyMax white PETG filament 1.75mm, 0.75kg

Zoom in

Description This Polymaker PolyMax filament in white has a diameter of 1.75mm and is ideal for 3D printing of strong objects. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality than ordinary PETG.

PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. The ideal printing temperature is 230°C to 240°C. For best results, use a heated bed of 70°C to 80°C.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14096
Amount:	0.75 kg	Spool empty weight:	± 125 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	4.5 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-240 °C

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

Delivery in New Year

Polymaker PolyMax Tough black PETG-ESD filament 1.75mm, 0.5kg

Zoom in

Description With PolyMax Tough PETG-ESD filament you can benefit from even better mechanical properties compared to normal PETG. The added carbon nanotubes make the ESD safe. This means that the transfer of static electricity is reduced and damage to products can be prevented. This makes Tough PETG-ESD perfect for use in combination with electronics.

If you would like to make a very strong print with high layer adhesion, it is advisable to switch off the fan when printing with this filament. If you prefer a print with a high-quality finish, it is recommended to turn on the fan. For an ideal middle ground, it is best to run the fan at 20%.

Specifications

Hazard class:	N/A	Our item no:	DFP14300
Amount:	0.5 kg	Spool empty weight:	± 190 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	70-80 °C	Tunnel code:	N/A
Material:	PETG ESD	Packing group:	NO
Nozzle temp range:	250-290 °C	Is liquid:	no

Order now, we can ship this on Monday!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

XYZprinting clear blue PETG filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description With the clear blue PETG filament from XYZprinting you can easily create strong objects. PETG is water-repellent and has a low shrinkage content. This allows you to print strong designs that warp less quickly. The blue PETG filament is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful, shiny look. Use of a heated bed is optional. The filament has a diameter of 1.75mm.

Read more about printing with PETG filament here .

Specifications

Hazard class:	N/A	Our item no:	DFP05048
Amount:	0.6 kg	Inner diameter:	Ø 5.0 cm
Brand:	XYZprinting	Outer diameter:	Ø 16.8 cm
Colour:	bright blue	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	40-65 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	215-230 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

XYZprinting bright red PETG filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description With the bright red PETG filament from XYZprinting you can easily create strong objects. PETG is water-repellent and has a low shrinkage content. This allows you to print strong designs that warp less quickly. The red PETG filament is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful, shiny look. Use of a heated bed is optional. The filament has a diameter of 1.75mm.

Read more about printing with PETG filament here .

Specifications

Amount:	0.6 kg	Nozzle temp range:	215-230 °C
Brand:	XYZprinting	Our item no:	DFP05051
Colour:	bright red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 16.8 cm
Heated bed temp:	40-65 °C	Spool width:	5.4 cm
Material:	PETG

This product is end of life.

XYZprinting natural PETG filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description With the PETG filament natural from XYZprinting you can easily create strong objects. PETG is water-repellent and has a low shrinkage content. This allows you to print strong designs that warp less quickly. The PETG filament in the color natural is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful, shiny look. Use of a heated bed is optional. The filament has a diameter of 1.75mm.

Read more about printing with PETG filament here.

Specifications

Amount:	0.6 kg	Nozzle temp range:	215-230 °C
Brand:	XYZprinting	Our item no:	DFP05050
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 16.8 cm
Heated bed temp:	40-65 °C	Spool width:	5.4 cm
Material:	PETG

This product is end of life.

XYZprinting tangerine PETG filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description With the PETG filament tangerine from XYZprinting you can easily create strong objects. PETG is water-repellent and has a low shrinkage content. This allows you to print strong designs that warp less quickly. The PETG filament is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful, shiny look. Use of a heated bed is optional. The filament has a diameter of 1.75mm.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP05049
Amount:	0.6 kg	Inner diameter:	Ø 5.0 cm
Brand:	XYZprinting	Outer diameter:	Ø 16.8 cm
Colour:	orange	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	40-65 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	215-230 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.50 (coming soon) (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

Zortrax graphite Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this graphite Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The grey filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00111
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	graphite	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

Delivery in New Year

Zortrax graphite Z-ASA Pro filament 1.75mm, 2kg

Zoom in

Description Create durable prints with Zortrax Z-ASA Pro filament in the color graphite. The material is resistant to weather influences and UV light. This makes this filament perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The grey filament has a diameter of 1.75mm and a weight of 2000g.

Specifications

Hazard class:	N/A	Our item no:	DFP00110
Amount:	2 kg	Inner diameter:	Ø 5.5 cm
Brand:	Zortrax	Outer diameter:	Ø 28.0 cm
Colour:	graphite	Spool width:	7.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

This product is end of life.

Zortrax pure white Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure white Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The white filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00115
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	pure white	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

Delivery in New Year

Zortrax pure white Z-ASA Pro filament 1.75mm, 2kg

Zoom in

Description Create durable prints with Zortrax Z-ASA Pro filament in the colour pure white. The material is resistant to weather influences and UV light. This makes this filament perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The white filament has a diameter of 1.75mm and a weight of 2000g.

Specifications

Hazard class:	N/A	Our item no:	DFP00114
Amount:	2 kg	Inner diameter:	Ø 5.5 cm
Brand:	Zortrax	Outer diameter:	Ø 28.0 cm
Colour:	pure white	Spool width:	7.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

This product is end of life.

Zortrax pure black Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure black Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The black filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00113
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	pure black	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

Delivery in New Year

Zortrax pure black Z-ASA Pro filament 1.75mm, 2kg

Zoom in

Description Create durable prints with this pure black Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The black filament has a diameter of 1.75mm and a weight of 2000g.

Specifications

Amount:	2 kg	Nozzle temp range:	255-265 °C
Brand:	Zortrax	Our item no:	DFP00112
Colour:	pure black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 28.0 cm
Heated bed temp:	70-90 °C	Spool width:	7.4 cm
Material:	Z ASA Pro

This product is end of life.

Zortrax grey Z-PETG filament 1.75mm, 0.8kg

Zoom in

Description The grey Zortrax Z-PETG filament is a strong plastic with a small shrinkage factor. Z-PETG is resistant to UV light, oil, lubricants and has a high hardness. This makes the material ideal for prints that need to be very strong, often used in machines or parts of radio controlled vehicles. Thanks to its high hardness, products made of Z-PETG can be used outdoors for a long time without loss of material performance. The filament has a diameter of 1.75mm and a weight of 0.8kg.

Specifications

Hazard class:	N/A	Our item no:	DFP00133
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	grey	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	40-80 °C	Packing group:	NO
Material:	Z PETG	Is liquid:	no
Nozzle temp range:	235-245 °C

This product is end of life.

Zortrax grey Z-PETG filament 1.75mm, 2kg

Zoom in

Description The grey Zortrax Z-PETG filament is a strong plastic with a small shrinkage factor. Z-PETG is resistant to UV light, oil, lubricants and has a high hardness. This makes the material ideal for prints that need to be very strong, often used in machines or parts of radio controlled vehicles. Thanks to its high hardness, products made of Z-PETG can be used outdoors for a long time without loss of material performance. The filament has a diameter of 1.75mm and a weight of 2kg.

Specifications

Hazard class:	N/A	Our item no:	DFP00131
Amount:	2 kg	Inner diameter:	Ø 5.5 cm
Brand:	Zortrax	Outer diameter:	Ø 28.0 cm
Colour:	grey	Spool width:	7.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	40-80 °C	Packing group:	NO
Material:	Z PETG	Is liquid:	no
Nozzle temp range:	235-245 °C

€107.50 (Incl. 23% VAT)
(€87.40 Excl. 23% VAT)

Delivery in New Year

Zortrax black Z-PETG filament 1.75mm, 0.8kg

Zoom in

Description The black Zortrax Z-PETG filament is a strong plastic with a small shrinkage factor. Z-PETG is resistant to UV light, oil, lubricants and has a high hardness. This makes the material ideal for prints that need to be very strong, often used in machines or parts of radio controlled vehicles. Thanks to its high hardness, products made of Z-PETG can be used outdoors for a long time without loss of material performance. The filament has a diameter of 1.75mm and a weight of 0.8kg.

Specifications

Hazard class:	N/A	Our item no:	DFP00130
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	black	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	40-80 °C	Packing group:	NO
Material:	Z PETG	Is liquid:	no
Nozzle temp range:	235-245 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€53.50 (coming soon) (Incl. 23% VAT)
(€43.50 Excl. 23% VAT)

Polymaker Fiberon black PETG-ESD filament 1.75mm, 0.5kg

Zoom in

1
0

Description With PolyMax Tough PETG-ESD filament you can benefit from even better mechanical properties compared to normal PETG. The added carbon nanotubes make it ESD safe. This means that the transfer of static electricity is reduced and damage to products can be prevented. This makes Tough PETG-ESD perfect for use in combination with electronics.

If you want to make a very strong print with high layer adhesion, it is recommended to turn the fan off when printing with this filament. If you prefer a print with a high-quality finish, it is recommended to turn the fan on. For a happy medium, it is best to run the fan at 20%.

Specifications

Hazard class:	N/A	Inner diameter:	Ø 5.5 cm
Amount:	0.5 kg	Outer diameter:	Ø 20.0 cm
Brand:	Polymaker	Spool width:	5.2 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Nozzle temp range:	250-290 °C	Is liquid:	no

Please note: This item is expected in the 3rd week of December.

€48.50 (coming soon) (Incl. 23% VAT)
(€39.43 Excl. 23% VAT)

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this on Monday!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this on Monday!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this on Monday!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DAR00620

Order now, we can ship this on Monday!

€9.75 (Incl. 23% VAT)
(€7.93 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.181 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00876

Order now, we can ship this on Monday!

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Amount:	0.644 kg	Packing group:	NO
Brand:	-	Is liquid:	yes
Our item no:	DAR00877

Order now, we can ship this on Monday!

€61.50 (Incl. 23% VAT)
(€50.00 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this on Monday!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this on Monday!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this on Monday!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

Delivery in New Year

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this on Monday!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Our item no:	DFB00006
Brand:	SUNLU	Tunnel code:	N/A
Colour:	white	Packing group:	NO
Dimensions:	237 x 271 x 100 mm	Is liquid:	no

Order now, we can ship this on Monday!

€50.50 (Incl. 23% VAT)
(€41.06 Excl. 23% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Hazard class:	N/A	Temp range:	35-70 °C
Brand:	SUNLU	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	274 x 265 x 118 mm	Is liquid:	no
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	11.9 kg
Our item no:	DAR00698

Order now, we can ship this on Monday!

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Polymaker	Packing group:	NO
Manual:	Download (PDF)	Is liquid:	no
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg
Our item no:	DAR00634

€73.50 (Incl. 23% VAT)
(€59.76 Excl. 23% VAT)

Delivery in New Year

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	white	Is liquid:	no
Our item no:	DRW00069

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

Delivery in New Year

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Hazard class:	N/A	Our item no:	DAR01448
Brand:	SUNLU	Tunnel code:	N/A
Dimensions:	350 x 516 x 278 mm	Packing group:	NO
Input voltage:	110-240V	Is liquid:	yes
Power rating:	320 W	Weight:	4.8 kg

Order now, we can ship this on Monday!

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

in stock

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	SUNLU	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Order now, we can ship this on Monday!

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

View all water resistant filaments

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

View all water resistant filaments