Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

123-3D black ASA filament 1.75mm, 1kg DFP01108

2
1
0

Description This black ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01108
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

Order now, we can ship this tomorrow!

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

in stock

123-3D grey ASA filament 1.75mm, 1kg

Zoom in

2
1
0

Description This black ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01104
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

5-7 day delivery

123-3D neutral ASA filament 1.75mm, 1kg

Zoom in

2
1
0

Description This neutral ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75mm and there is 1kg on the spool.

Specifications

Hazard class:	N/A	Our item no:	DFP01106
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	neutral	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Spool width:	6.8 cm
Material:	ASA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	245-265 °C	Is liquid:	no

Order now, we can ship this tomorrow!

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

in stock

REAL blue Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This blue 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02012
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this tomorrow!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL yellow Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This yellow 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02021
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this tomorrow!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL grey Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This grey 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02013
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this tomorrow!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL green Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This green 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02014
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this tomorrow!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL light green Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This light green 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02015
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	light green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this tomorrow!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL neutral Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This neutral 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02016
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

REAL orange Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This orange 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02017
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this tomorrow!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL red Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This red 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02018
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

REAL white Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This white 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02019
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

Order now, we can ship this tomorrow!

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

in stock

REAL black Low Warp ASA filament 1.75mm, 1kg

Zoom in

Description This black 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Hazard class:	N/A	Nozzle temp range:	205-245 °C
Amount:	1 kg	Our item no:	DFS02010
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	55-85 °C	Packing group:	NO
Material:	-	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

REAL black ASA-CF filament 1.75mm, 1kg

Zoom in

Description ASA-CF filament from REAL has all the benefits of standard ASA with the addition of 10% carbon particles, which provides better reliability and stiffness. It is easy to print, has good bonding between layers and has a beautiful matte appearance. In addition, it is just as water, UV and heat resistant as standard ASA and prints from this material can be used perfectly outdoors. With ASA-CF you get a strong and low-shrink filament that is perfect for prints that must also be able to easily withstand different weather conditions.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-265 °C
Amount:	1 kg	Our item no:	DFS02022
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	85-115 °C	Packing group:	NO
Material:	-	Is liquid:	no

€62.50 (Incl. 23% VAT)
(€50.81 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse neutral ASA filament 1.75mm, 0.75kg

Zoom in

Description This neutral BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Hazard class:	N/A	Nozzle temp range:	260-280 °C
Amount:	0.75 kg	Our item no:	DFB00038
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	100-120 °C	Packing group:	NO
Material:	ASA	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black ASA filament 1.75mm, 0.75kg

Zoom in

Description This black BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Hazard class:	N/A	Our item no:	DFB00039
Amount:	0.75 kg	RAL colour no:	9005
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	100-120 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	260-280 °C

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

ColorFabb natural ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour natural has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance up to 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13000
Colour:	natural	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	ASA	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

ColorFabb black ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour black has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance of 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13001
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	90 m	Packing group:	NO
Material:	ASA	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

5-7 day delivery

ColorFabb natural LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The natural LW-ASA filament from colorFabb has a diameter of 1.75mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96 degrees.

Note: the colour may vary.

Print recommendation: use a heated platform of 90-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13016
Colour:	natural	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW ASA	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

ColorFabb black LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The black LW-ASA filament from colorFabb has a diameter of 1.75mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.65 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13014
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW ASA	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

eSun black eASA filament 1.75mm, 1kg

Zoom in

Description eSun eASA filament has mechanical properties equal to those of ABS. In addition, eASA is more resistant to bad weather conditions and UV radiation. The strength and stiffness, in combination with the high impact resistance, make this filament ideal for outdoor prints.

Specifications

Hazard class:	N/A	Our item no:	DFE20231
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	black	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	90-110 °C	Packing group:	NO
Material:	-	Is liquid:	no
Nozzle temp range:	240-270 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite army brown ASA filament 1.75mm, 1kg

Zoom in

Description This army brown Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14282
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	army brown	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this tomorrow!

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

in stock

Polymaker PolyLite army green ASA filament 1.75mm, 1kg

Zoom in

Description This army green Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14278
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	army green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this tomorrow!

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite black ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14054
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this tomorrow!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 3kg

Zoom in

Description This black Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14180
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	black	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite blue ASA filament 1.75mm, 1kg

Zoom in

Description This blue Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14181
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this tomorrow!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite green ASA filament 1.75mm, 1kg

Zoom in

Description This green Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14279
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite grey ASA filament 1.75mm, 1kg

Zoom in

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14183
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this tomorrow!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite grey ASA filament 1.75mm, 3kg

Zoom in

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14283
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	grey	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€95.50 (Incl. 23% VAT)
(€77.64 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite natural ASA filament 1.75mm, 1kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14185
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	natural	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite natural ASA filament 1.75mm, 3kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14186
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	natural	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite orange ASA filament 1.75mm, 1kg

Zoom in

Description This orange Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14276
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite purple ASA filament 1.75mm, 1kg

Zoom in

Description This purple Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14281
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	purple	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite red ASA filament 1.75mm, 1kg

Zoom in

Description This red Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14189
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

Order now, we can ship this tomorrow!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Polymaker PolyLite teal ASA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite ASA filament in the colour teal has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14280
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	teal	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite white ASA filament 1.75mm, 1kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14056
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite white ASA filament 1.75mm, 3kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Hazard class:	N/A	Our item no:	DFP14190
Amount:	3 kg	Spool empty weight:	± 440 grams
Brand:	Polymaker	Inner diameter:	Ø 5.4 cm
Colour:	white	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Spool width:	11.9 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€92.50 (Incl. 23% VAT)
(€75.20 Excl. 23% VAT)

5-7 day delivery

Polymaker PolyLite yellow ASA filament 1.75mm, 1kg

Zoom in

Description This yellow Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For the best result, use a heated bed of 75 to 95°C.

Specifications

Hazard class:	N/A	Our item no:	DFP14277
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-95 °C	Packing group:	NO
Material:	ASA	Is liquid:	no
Nozzle temp range:	240-260 °C

€36.50 (Incl. 23% VAT)
(€29.67 Excl. 23% VAT)

5-7 day delivery

Zortrax graphite Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this graphite Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The grey filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00111
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	graphite	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

Zortrax pure white Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure white Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The white filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00115
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	pure white	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

Zortrax pure black Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure black Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The black filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Hazard class:	N/A	Our item no:	DFP00113
Amount:	0.8 kg	Inner diameter:	Ø 4.4 cm
Brand:	Zortrax	Outer diameter:	Ø 20.0 cm
Colour:	pure black	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	70-90 °C	Packing group:	NO
Material:	Z ASA Pro	Is liquid:	no
Nozzle temp range:	255-265 °C

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

Magigoo Pro 3D glue stick for PC filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with PC filament. The adhesive stick ensures perfect adhesion of PC-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! You use the Magigoo PC glue stick on glass and plastic surfaces. The package contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00208	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

€24.75 (Incl. 23% VAT)
(€20.12 Excl. 23% VAT)

5-7 day delivery

Spectrum dark grey ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm dark grey filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	grey	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Spectrum deep black ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm deep black filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	black	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Spectrum lime green ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm lime green filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	green	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Spectrum natural ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm natural filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	neutral	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Spectrum navy blue ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm navy blue filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	blue	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Spectrum Pacific blue ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm Pacific blue filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	blue	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Spectrum polar white ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm polar white filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	white	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Spectrum silver star ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm silver star filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	silver	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Spectrum traffic yellow ASA 275 filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum ASA 275 filament has excellent resistance to UV radiation, heat and other weather conditions. In addition, this filament has an improved flow, reduced shrinkage and better adhesion between layers. ASA 275 can be printed almost as easily as Premium PLA, allowing large 3D prints to be printed at high speeds and not shrink after cooling. This is a 1.75mm traffic yellow filament on a 1kg spool.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-240 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	yellow	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	40-60 °C	Packing group:	NO
Material:	-	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

1.75mm ASA

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

1.75mm ASA