Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Order a black PLA bundle!

In stock €98.00

Super Lube

€8.25

Hot end copper cleaning brush

Hot end copper cleaning brush

€3.95

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

€7.75

1.75mm Neutral PLA Filament

View other colours:

View 2.85mm Neutral PLA Filament here

123-3D neutral PLA filament 1.75mm, 1.1kg

123-3D neutral PLA filament 1.75mm, 1.1kg DFP01078

2
1
0

Description Our neutral 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01078
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this on Monday!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

123-3D neutral Tough PLA filament 1.75mm, 1.1kg

123-3D neutral Tough PLA filament 1.75mm, 1.1kg DFP01148

2
1
0

Description Our neutral Tough PLA filament is specially designed to better withstand impact. The impact resistance and strength are comparable to ABS, while being combined with the stiffness and ease of use of PLA. You can easily print larger, strong and impact-resistant models with the environmentally friendly PLA Tough. This filament has a diameter of 1.75mm and there is 1.1kg on the spool.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01148
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	neutral	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA tough	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	205-225 °C	Is liquid:	no

Order now, we can ship this on Monday!

€41.50 (Incl. 23% VAT)
(€33.74 Excl. 23% VAT)

in stock

REAL neutral PLA filament 1.75mm, 1kg

REAL neutral PLA filament 1.75mm, 1kg DFP02001 DFP02001

Description The neutral coloured REAL PLA filament (1.75mm) has a natural colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	1 kg	Our item no:	DFP02001
Brand:	REAL	Roundness:	above 95 percent
Colour:	neutral	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Delivery in New Year

REAL neutral PLA Pro filament 1.75mm, 1kg

REAL neutral PLA Pro filament 1.75mm, 1kg DFP02128

Description The neutral PLA Pro is a premium filament (1.75mm) that combines some of the best qualities of PLA and ABS. 3D printing with PLA Pro is as easy as printing with PLA, but delivers results with the mechanical qualities of ABS. With PLA Pro you can print objects with a matte finish, making individual layers less noticeable. Compared to PLA, PLA Pro is much more resistant to high temperatures.

Specifications

Hazard class:	N/A	Our item no:	DFP02128
Amount:	1 kg	RAL colour no:	9010
Brand:	REAL	Roundness:	above 95 percent
Colour:	neutral	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50-60 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA Pro	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	215-245 °C

€45.50 (Incl. 23% VAT)
(€36.99 Excl. 23% VAT)

Delivery in New Year

REAL neutral PLA Tough filament 1.75mm, 0.5kg

REAL neutral PLA Tough filament 1.75mm, 0.5kg NLPLATNATURAL500MM175 DFP12020

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60 and 80°C.

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-220 °C
Amount:	0.5 kg	Our item no:	DFP12020
Brand:	REAL	Roundness:	above 95 percent
Colour:	neutral	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Spool width:	4.5 cm
Length:	165 m	Tunnel code:	N/A
Material:	PLA tough	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

in stock

REAL neutral PLA filament 1.75mm, 0.5kg

REAL neutral PLA filament 1.75mm, 0.5kg DFP02280

Description The neutral REAL PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP02280
Amount:	0.5 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	7.0 cm
Heated bed temp:	60-80 °C	Tunnel code:	N/A
Material:	PLA tough	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	190-220 °C

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

Delivery in New Year

REAL neutral PLA Tough filament 1.75mm, 1kg

REAL neutral PLA Tough filament 1.75mm, 1kg NLPLATNATURAL1000MM175 DFP12007

Description This PLA Tough filament from REAL combines the usability of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed objects, such as tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60 and 80°C.

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Hazard class:	N/A	Nozzle temp range:	190-220 °C
Amount:	1 kg	Our item no:	DFP12007
Brand:	REAL	Roundness:	above 95 percent
Colour:	neutral	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Spool width:	8.0 cm
Length:	330 m	Tunnel code:	N/A
Material:	PLA tough	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no

Order now, we can ship this on Monday!

€45.50 (Incl. 23% VAT)
(€36.99 Excl. 23% VAT)

in stock

BASF Ultrafuse neutral PLA filament 1.75mm, 0.75kg

BASF Ultrafuse neutral PLA filament 1.75mm, 0.75kg PLA-0001a075 DFB00122

Description This BASF PLA filament (1.75mm) is neutral in colour and suitable for 3D printing all kinds of creative designs. he perfect round shapeensures this PLA filament does not easily get stuck in the printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-220 °C
Amount:	0.75 kg	Our item no:	DFB00122
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon) (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 0.75kg

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 0.75kg PR1-7501a075 DFB00177

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The neutral white filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15 - 25°C) to ensure quality and durability.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-230 °C
Amount:	0.75 kg	Our item no:	DFB00177
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	neutral white	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA Pro One	Is liquid:	no

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 2.5kg

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 2.5kg PR1-7501a250 DFB00180

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The neutral white filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping (warping of the print).

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15 - 25°C) to ensure quality and durability.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-230 °C
Amount:	2.5 kg	Our item no:	DFB00180
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	neutral white	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA Pro One	Is liquid:	no

€87.00 (Incl. 23% VAT)
(€70.73 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 4.5kg

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 4.5kg PR1-7501a450 DFB00183

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The neutral white filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping (warping of the print).

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15 - 25°C) to ensure quality and durability.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-230 °C
Amount:	4.5 kg	Our item no:	DFB00183
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	neutral white	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA Pro One	Is liquid:	no

€147.00 (Incl. 23% VAT)
(€119.51 Excl. 23% VAT)

Delivery in New Year

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 8.5kg

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 8.5kg PR1-7501a850 DFB00186

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The neutral white filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15 - 25°C) to ensure quality and durability.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-230 °C
Amount:	8.5 kg	Our item no:	DFB00186
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	neutral white	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA Pro One	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€277.00 (coming soon) (Incl. 23% VAT)
(€225.20 Excl. 23% VAT)

colorFabb natural LW-PLA filament 1.75mm, 0.75kg

colorFabb natural LW-PLA filament 1.75mm, 0.75kg LW-PLANATURAL1.75/750 DFP13022

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour natural has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.10 mm
Amount:	0.75 kg	Nozzle temp range:	240-260 °C
Brand:	colorFabb	Our item no:	DFP13022
Colour:	natural	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	90-100 °C	Tunnel code:	N/A
Length:	250 m	Packing group:	NO
Material:	LW PLA	Is liquid:	no

Order now, we can ship this on Monday!

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

in stock

Dremel transparent PLA filament 1.75mm, 0.75kg

Dremel transparent PLA filament 1.75mm, 0.75kg DCP00189

Description Create detailed 3D prints with a high-quality finish with this transparent PLA filament from Dremel.

This biodegradable PLA filament is an extremely popular and user-friendly filament type. Ideal for producing visually appealing 3D objects that require little force. In addition, this filament also has a slightly higher print temperature (220°C) than regular PLA and an optimal bed temperature of 35°C. With a diameter of 1.75mm it is compatible with almost all 3D printers.

In addition, the coil is equipped with an RFID chip, so that your Dremel printer automatically uses the correct settings. The perfect material for beginners and experts!

Specifications

Hazard class:	N/A	Our item no:	DCP00189
Amount:	0.75 kg	Inner diameter:	Ø 1.9 cm
Brand:	Dremel	Outer diameter:	Ø 18.0 cm
Colour:	transparent	Spool width:	5.4 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	200-240 °C

€41.50 (Incl. 23% VAT)
(€33.74 Excl. 23% VAT)

Delivery in New Year

eSun eMarble white PLA filament 1.75mm, 1kg

eSun eMarble white PLA filament 1.75mm, 1kg EMARBLE175N1 DFE20061

Description The white eMarble filament from eSun has a marble appearance. You can easily print the material with your 3D printer. This eSun eMarble PLA filament has a diameter of 1.75mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20061
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	marble	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	0-50 °C	Packing group:	NO
Material:	PLA EMARBLE	Is liquid:	no
Nozzle temp range:	180-210 °C

Order now, we can ship this on Monday!

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

in stock

eSun natural ePLA-LW filament 1.75mm, 1kg

eSun natural ePLA-LW filament 1.75mm, 1kg ePLA-LW175N1 DFE20225

Description eSun ePLA-LW Natural is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.

The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers.

Density from 0.54 grams per cm3
Foaming volume ratio of 220%
Manually adjust the strength and foaming ratio
Matte surface
Good adhesion between layers
Easy to dye
Easy to print

Specifications

Hazard class:	N/A	Our item no:	DFE20225
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	neutral	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	45-60 °C	Packing group:	NO
Material:	-	Is liquid:	no
Nozzle temp range:	190_270 °C

€38.00 (coming soon) (Incl. 23% VAT)
(€30.89 Excl. 23% VAT)

eSun natural ePLA-ST filament 1.75mm, 1kg

eSun natural ePLA-ST filament 1.75mm, 1kg DFE20260

Description This Natural eSun ePLA-ST filament has high impact resistance, stretches before breaking, is strong and can be printed very accurately. It is a strong PLA filament that has better hardness than PETG and can be printed as smoothly as PLA. This makes this filament suitable for making mechanical parts that need to be printed strongly and accurately.

Specifications

Hazard class:	N/A	Our item no:	DFE20260
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	natural	Spool width:	6.5 cm
Filament diameter:	1.75 mm	Tunnel code:	N/A
Heated bed temp:	45-60 °C	Packing group:	NO
Material:	-	Is liquid:	no
Nozzle temp range:	200-230 °C

Order now, we can ship this on Monday!

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

in stock

Polymaker PolyLite natural PLA filament 1.75mm, 1kg

Polymaker PolyLite natural PLA filament 1.75mm, 1kg 70201 PA02011 PM70201 DFP14069

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a clear natural colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190 to 230°C. We recommend a temperature between 25 and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP14069
Amount:	1 kg	Spool empty weight:	± 140 grams
Brand:	Polymaker	Inner diameter:	Ø 5.5 cm
Colour:	natural	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Filament print speed:	40-60 mm/s	Tunnel code:	N/A
Heated bed temp:	25-60 °C	Packing group:	NO
Material:	PLA	Is liquid:	no
Nozzle temp range:	190-230 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.50 (coming soon) (Incl. 23% VAT)
(€26.42 Excl. 23% VAT)

123-3D BK/W/DB/N/R/Y/GRY/O PLA filament bundle 1.75mm, 8.8kg Total 8.8kg of filament!

123-3D BK/W/DB/N/R/Y/GRY/O PLA filament bundle 1.75mm, 8.8kg DFE00063

Description Our PLA filament bundle consists of the 8 most popular colours of our new improved 123-3D filament. This filament bundle is designed with affordability in mind, suitable for any maker from beginner to advanced. Thanks to the high quality, the 123-3D PLA filament is less brittle and the filament has a better hardness than standard PLA.

This bundle contains:

1 x 123-3D black PLA filament 1.75mm, 1.1kg
1 x 123-3D white PLA filament 1.75mm, 1.1kg
1 x 123-3D dark blue PLA filament 1.75mm, 1.1kg
1 x 123-3D neutral PLA filament 1.75mm, 1.1kg
1 x 123-3D red PLA filament 1.75mm, 1.1kg
1 x 123-3D yellow PLA filament 1.75mm, 1.1kg
1 x 123-3D grey PLA filament 1.75mm, 1.1kg
1 x 123-3D orange PLA filament 1.75mm, 1.1kg

Specifications

Hazard class:	N/A	Our item no:	DFE00063
Amount:	8.8 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	multi colour	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	195-235

€186.50 (Incl. 23% VAT)
(€151.63 Excl. 23% VAT)

Delivery in New Year

Spectrum natural Premium PLA filament 1.75mm, 1kg

Spectrum natural Premium PLA filament 1.75mm, 1kg 80010 DFS10017

1
0

Description This 1.75mm natural filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	neutral	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	-	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

Delivery in New Year

Spectrum translucent Premium PLA filament 1.75mm, 1kg

Spectrum translucent Premium PLA filament 1.75mm, 1kg 80335 DFS10024

1
0

Description This 1.75mm translucent filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Hazard class:	N/A	Nozzle temp range:	185-215 °C
Amount:	1 kg	Spool empty weight:	± 250 grams
Brand:	Spectrum	Inner diameter:	Ø 52.0 cm
Colour:	neutral	Outer diameter:	Ø 200.0 cm
Filament diameter:	1.75 mm	Spool width:	67.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-45 °C	Packing group:	NO
Material:	-	Is liquid:	no

€25.50 (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

Delivery in New Year

3DLAC adhesive spray, 400ml

3DLAC adhesive spray, 400ml DVB00005

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this on Monday!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this on Monday!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

3DLAC stick, 80ml DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this on Monday!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml MO2018 DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

Order now, we can ship this on Monday!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml MO2016 DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this on Monday!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

123-3D Filament Spool Holder

123-3D Filament Spool Holder DFR00005

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	123-3D	Is liquid:	no
Our item no:	DFR00005	Weight:	0.325 kg
Tunnel code:	N/A

Order now, we can ship this on Monday!

€15.95 (Incl. 23% VAT)
(€12.97 Excl. 23% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

123-3D cleaning filament 1.75mm, 100g DFR00000

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Hazard class:	N/A	Nozzle temp range:	210-225 °C
Amount:	0.1 kg	Our item no:	DFR00000
Brand:	123-3D	Tunnel code:	N/A
Colour:	neutral	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Order now, we can ship this on Monday!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

© 2024 - 123-3d.ie