Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Order a black PLA bundle!

In stock €98.00

Heated bed clamps (4-pack)

Heated bed clamps (4-pack)

€6.75

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

€7.75

3D print post-processing set

3D print post-processing set

€9.75

BASF Ultrafuse blue PET filament 2.85mm, 0.75kg

BASF Ultrafuse blue PET filament 2.85mm, 0.75kg Pet-0315b075 DFB00075

Description The blue BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00075
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse yellow PET filament 2.85mm, 0.75kg

BASF Ultrafuse yellow PET filament 2.85mm, 0.75kg Pet-0316b075 DFB00076

Description The yellow BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00076
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse grey PET filament 2.85mm, 0.75kg

BASF Ultrafuse grey PET filament 2.85mm, 0.75kg Pet-0323b075 DFB00077

Description The grey BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00077
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	grey	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse green PET filament 2.85mm, 0.75kg

BASF Ultrafuse green PET filament 2.85mm, 0.75kg Pet-0317b075 DFB00078

Description The green BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00078
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse orange PET filament 2.85mm, 0.75kg

BASF Ultrafuse orange PET filament 2.85mm, 0.75kg Pet-0319b075 DFB00079

Description The orange BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00079
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse pearl white PET filament 2.85mm, 0.75kg

BASF Ultrafuse pearl white PET filament 2.85mm, 0.75kg Pet-0311b075 DFB00080

Description The pearly white BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Our item no:	DFB00080
Amount:	0.75 kg	RAL colour no:	1013
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	pearl white	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

This product is end of life.

BASF Ultrafuse red PET filament 2.85mm, 0.75kg

BASF Ultrafuse red PET filament 2.85mm, 0.75kg Pet-0314b075 DFB00081

Description The red BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00081
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent PET filament 2.85mm, 0.75kg

BASF Ultrafuse transparent PET filament 2.85mm, 0.75kg Pet-0301b075 DFB00082

Description The transparent BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	0.75 kg	Our item no:	DFB00082
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent blue PET filament 2.85mm, 0.75kg

BASF Ultrafuse transparent blue PET filament 2.85mm, 0.75kg Pet-0305b075 DFB00083

Description The transparent blue BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Our item no:	DFB00083
Amount:	0.75 kg	RAL colour no:	5002
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent yellow PET filament 2.85mm, 0.75kg

BASF Ultrafuse transparent yellow PET filament 2.85mm, 0.75kg Pet-0306b075 DFB00084

Description The transparent yellow BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Our item no:	DFB00084
Amount:	0.75 kg	RAL colour no:	1003
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent yellow	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent green PET filament 2.85mm, 0.75kg

BASF Ultrafuse transparent green PET filament 2.85mm, 0.75kg Pet-0307b075 DFB00085

Description The transparent green BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Our item no:	DFB00085
Amount:	0.75 kg	RAL colour no:	6018
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent green	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent orange PET filament 2.85mm, 0.75kg

BASF Ultrafuse transparent orange PET filament 2.85mm, 0.75kg Pet-0309b075 DFB00086

Description The transparent orange BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Our item no:	DFB00086
Amount:	0.75 kg	RAL colour no:	2008
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	transparent orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent red PET filament 2.85mm, 0.75kg

BASF Ultrafuse transparent red PET filament 2.85mm, 0.75kg Pet-0304b075 DFB00087

Description The transparent red BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Amount:	0.75 kg	Nozzle temp range:	200-220 °C
Brand:	BASF	Our item no:	DFB00087
Colour:	red	RAL colour no:	3020
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Material:	PET

This product is end of life.

BASF Ultrafuse white PET filament 2.85mm, 0.75kg

BASF Ultrafuse white PET filament 2.85mm, 0.75kg Pet-0303b075 DFB00088

Description The white BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Our item no:	DFB00088
Amount:	0.75 kg	RAL colour no:	9010
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	white	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET filament 2.85mm, 0.75kg

BASF Ultrafuse black PET filament 2.85mm, 0.75kg Pet-0302b075 DFB00089

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Our item no:	DFB00089
Amount:	0.75 kg	RAL colour no:	9005
Brand:	BASF	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	5.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no
Nozzle temp range:	200-220 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent PET filament 2.85mm, 2.5kg

BASF Ultrafuse transparent PET filament 2.85mm, 2.5kg Pet-0301b250 DFB00090

Description The neutral BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	2.5 kg	Our item no:	DFB00090
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	neutral	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€83.00 (Incl. 23% VAT)
(€67.48 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse white PET filament 2.85mm, 2.5kg

BASF Ultrafuse white PET filament 2.85mm, 2.5kg Pet-0303b250 DFB00091

Description The white BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	2.5 kg	Our item no:	DFB00091
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	white	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€83.00 (Incl. 23% VAT)
(€67.48 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET filament 2.85mm, 2.5kg

BASF Ultrafuse black PET filament 2.85mm, 2.5kg Pet-0302b250 DFB00092

Description The black BASF PET filament (2.85mm) has a deep color and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	2.5 kg	Our item no:	DFB00092
Brand:	BASF	Inner diameter:	Ø 5.1 cm
Colour:	black	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Spool width:	10.2 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€83.00 (Incl. 23% VAT)
(€67.48 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent PET filament 2.85mm, 4.5kg

BASF Ultrafuse transparent PET filament 2.85mm, 4.5kg Pet-0301b450 DFB00093

Description The neutral BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	4.5 kg	Our item no:	DFB00093
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	neutral	Outer diameter:	Ø 35.0 cm
Filament diameter:	2.85 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

This product is end of life.

BASF Ultrafuse white PET filament 2.85mm, 4.5kg

BASF Ultrafuse white PET filament 2.85mm, 4.5kg Pet-0303b450 DFB00094

Description The white BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For es filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.xample, most plastic bottles are made of PET.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	4.5 kg	Our item no:	DFB00094
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	white	Outer diameter:	Ø 35.0 cm
Filament diameter:	2.85 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€134.00 (Incl. 23% VAT)
(€108.94 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET filament 2.85mm, 4.5kg

BASF Ultrafuse black PET filament 2.85mm, 4.5kg Pet-0302b450 DFB00095

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	4.5 kg	Our item no:	DFB00095
Brand:	BASF	Inner diameter:	Ø 5.0 cm
Colour:	black	Outer diameter:	Ø 35.0 cm
Filament diameter:	2.85 mm	Spool width:	10.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€134.00 (Incl. 23% VAT)
(€108.94 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse transparent PET filament 2.85mm, 8.5kg

BASF Ultrafuse transparent PET filament 2.85mm, 8.5kg Pet-0301b850 DFB00096

Description The neutral BASF PET filament (2.85mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use one.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	8.5 kg	Our item no:	DFB00096
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	neutral	Outer diameter:	Ø 37.0 cm
Filament diameter:	2.85 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

This product is end of life.

BASF Ultrafuse white PET filament 2.85mm, 8.5kg

BASF Ultrafuse white PET filament 2.85mm, 8.5kg Pet-0303b850 DFB00097

Description The white BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	8.5 kg	Our item no:	DFB00097
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	white	Outer diameter:	Ø 37.0 cm
Filament diameter:	2.85 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€257.00 (Incl. 23% VAT)
(€208.94 Excl. 23% VAT)

5-7 day delivery

BASF Ultrafuse black PET filament 2.85mm, 8.5kg

BASF Ultrafuse black PET filament 2.85mm, 8.5kg Pet-0302b850 DFB00098

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Hazard class:	N/A	Nozzle temp range:	200-220 °C
Amount:	8.5 kg	Our item no:	DFB00098
Brand:	BASF	Inner diameter:	Ø 3.5 cm
Colour:	black	Outer diameter:	Ø 37.0 cm
Filament diameter:	2.85 mm	Spool width:	17.0 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	75-100 °C	Packing group:	NO
Material:	PET	Is liquid:	no

€257.00 (Incl. 23% VAT)
(€208.94 Excl. 23% VAT)

5-7 day delivery

123-3D carbon PETG filament 2.85mm, 0.5kg

123-3D carbon PETG filament 2.85mm, 0.5kg DFE08001

Description The carbon PETG filament contains 20% carbon particles. This gives 3D printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is more resistant to heat, stiffer and more impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	0.5 kg	Our item no:	DFE08001
Brand:	123-3D	Roundness:	above 95 percent
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	5.5 cm
Length:	64 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€34.50 20% discount:

€27.60 (Incl. 23% VAT)
(€22.44 Excl. 23% VAT)

in stock

123-3D black PETG filament 2.85mm, 1kg

123-3D black PETG filament 2.85mm, 1kg DFE02016c DFE11011

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11011
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Order now, we can ship this tomorrow!

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

in stock

123-3D transparent PETG filament 2.85mm, 1kg

123-3D transparent PETG filament 2.85mm, 1kg DFE02003c DFE11013

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11013
Brand:	123-3D	Roundness:	above 95 percent
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€29.50 (coming soon) (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

123-3D sky blue PETG filament 2.85mm, 1kg

123-3D sky blue PETG filament 2.85mm, 1kg DFE11014

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of big objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, the whole has unique properties, for example it is a hydrophobic material that does not absorb water. The sky blue 2.85mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11014
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	sky blue	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D red PETG filament 2.85mm, 1kg

123-3D red PETG filament 2.85mm, 1kg DFE11015

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The red 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11015
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D green PETG filament 2.85mm, 1kg

123-3D green PETG filament 2.85mm, 1kg DFE02029c DFE11016

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of big objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, the whole has unique properties, for example it is a hydrophobic material that does not absorb water. The green 2.85mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11016
Amount:	1 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	green	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D transparent black PETG filament 2.85mm, 1kg

123-3D transparent black PETG filament 2.85mm, 1kg DFE02016c DFP14095c DFE11017

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of big, clear objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, the whole has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent black 2.85mm PETG is a clear, slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11017
Brand:	123-3D	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D transparent blue PETG filament 2.85mm, 1kg

123-3D transparent blue PETG filament 2.85mm, 1kg DFE11018

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong, clear objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The blue transparent 2.85mm PETG is a clear, slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11018
Brand:	123-3D	Roundness:	above 95 percent
Colour:	transparent blue	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D transparent red PETG filament 2.85mm, 1kg

123-3D transparent red PETG filament 2.85mm, 1kg DFE02005c DFE02019c DFE02040c DFE11019

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong, clear objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and user-friendly. In addition, PETG has unique properties, for example, it is a hydrophobic material that does not absorb water. The transparent red 2.85mm PETG is a clear, slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11019
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D transparent yellow PETG filament 2.85mm, 1kg

123-3D transparent yellow PETG filament 2.85mm, 1kg DFE02009c DFE02042c DFE11020

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of big, clear objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, the whole has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent yellow 2.85mm PETG is a clear, slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11020
Brand:	123-3D	Roundness:	above 95 percent
Colour:	transparent yellow	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D transparent green PETG filament 2.85mm, 1kg

123-3D transparent green PETG filament 2.85mm, 1kg DFE02006c DFE02029c DFE11021

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of big, clear objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, the whole has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent green 2.85mm PETG is a clear, slightly flexible filament with which you can easily 3D print without odours.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	220-250 °C
Amount:	1 kg	Our item no:	DFE11021
Brand:	123-3D	Roundness:	above 95 percent
Colour:	green	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Spool width:	7.8 cm
Length:	128 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D black PETG filament 2.85mm, 2.3kg

123-3D black PETG filament 2.85mm, 2.3kg DFE11026

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11026
Amount:	2.3 kg	RAL colour no:	9017
Brand:	123-3D	Roundness:	above 95 percent
Colour:	black	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	290 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€64.50 (coming soon) (Incl. 23% VAT)
(€52.44 Excl. 23% VAT)

123-3D white PETG filament 2.85mm, 2.3kg

123-3D white PETG filament 2.85mm, 2.3kg DFE11027

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of big objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, the whole has unique properties, for example it is a hydrophobic material that does not absorb water. The white 2.85mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11027
Amount:	2.3 kg	RAL colour no:	-
Brand:	123-3D	Roundness:	above 95 percent
Colour:	white	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	290 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

This product is end of life.

123-3D sky blue PETG filament 2.85mm, 2.3kg

123-3D sky blue PETG filament 2.85mm, 2.3kg DFE11028

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, the whole has unique properties, for example it is a hydrophobic material that does not absorb water. The sky blue 2.85mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11028
Amount:	2.3 kg	RAL colour no:	5015
Brand:	123-3D	Roundness:	above 95 percent
Colour:	sky blue	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	290 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€64.50 20% discount:

€51.60 (Incl. 23% VAT)
(€41.95 Excl. 23% VAT)

5-7 day delivery

123-3D red PETG filament 2.85mm, 2.3kg

123-3D red PETG filament 2.85mm, 2.3kg DFE11029

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The red 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFE11029
Amount:	2.3 kg	RAL colour no:	3020
Brand:	123-3D	Roundness:	above 95 percent
Colour:	red	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.5 cm
Length:	290 m	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	220-250 °C

€64.50 20% discount:

€51.60 (Incl. 23% VAT)
(€41.95 Excl. 23% VAT)

5-7 day delivery

eSun solid black PETG filament 2.85mm, 1kg

eSun solid black PETG filament 2.85mm, 1kg PETG285SB1 DFE20052

Description eSun's solid black PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20052
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	solid black	Spool width:	6.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

eSun neutral PETG filament 2.85mm, 1kg

eSun neutral PETG filament 2.85mm, 1kg DFE20053

Description eSun's neutral PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20053
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	neutral	Spool width:	6.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

eSun transparent blue PETG filament 2.85mm, 1kg

eSun transparent blue PETG filament 2.85mm, 1kg PETG285U1 DFE20054

Description eSun's transparent blue PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20054
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	transparent blue	Spool width:	6.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

eSun transparent magenta PETG filament 2.85mm, 1kg

eSun transparent magenta PETG filament 2.85mm, 1kg DFE20055

Description eSun's transparent magenta PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20055
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	transparent magenta	Spool width:	6.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

eSun white PETG filament 2.85mm, 1kg

eSun white PETG filament 2.85mm, 1kg PETG285SW1 DFE20056

Description eSun's white PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20056
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	white	Spool width:	6.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

eSun solid red PETG filament 2.85mm, 1kg

eSun solid red PETG filament 2.85mm, 1kg PETG285SR1 DFE20057

Description eSun's solid red PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20057
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	even red	Spool width:	6.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

This product is end of life.

eSun transparent yellow PETG filament 2.85mm, 1kg

eSun transparent yellow PETG filament 2.85mm, 1kg DFE20058

Description eSun's transparent yellow PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DFE20058
Amount:	1 kg	Inner diameter:	Ø 5.0 cm
Brand:	eSun	Outer diameter:	Ø 20.0 cm
Colour:	transparent yellow	Spool width:	6.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	0-80 °C	Packing group:	NO
Material:	PETG	Is liquid:	no
Nozzle temp range:	230-250 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

123-3D transparent PETG filament 2.85mm, 1kg

123-3D transparent PETG filament 2.85mm, 1kg DFP01113

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFP01113
Amount:	1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	transparent	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	65-85 °C	Spool width:	6.8 cm
Material:	PETG Transparant	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	225-245 °C	Is liquid:	no

€29.50 20% discount:

€23.60 (Incl. 23% VAT)
(€19.19 Excl. 23% VAT)

5-7 day delivery

123-3D black PETG filament 2.85mm, 2.3kg

123-3D black PETG filament 2.85mm, 2.3kg DFP01126

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 2.85mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFP01126
Amount:	2.3 kg	Roundness:	above 95 percent
Brand:	123-3D	Inner diameter:	Ø 5.2 cm
Colour:	black	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Spool width:	10.0 cm
Heated bed temp:	65-85 °C	Tunnel code:	N/A
Material:	PETG	Packing group:	NO
Max deviation:	+mn ± 0.05 mm	Is liquid:	no
Nozzle temp range:	225-245 °C

€64.50 20% discount:

€51.60 (Incl. 23% VAT)
(€41.95 Excl. 23% VAT)

5-7 day delivery

colorFabb light grey PETG Economy filament 2.85mm, 0.75kg

colorFabb light grey PETG Economy filament 2.85mm, 0.75kg DFP13264

Description This light grey PETG Economy filament from colorFabb has a diameter of 2.85mm and is perfect for the professional user. It is ideal for making subtle and functional 3D prints. PETG filament is very popular because it is strong, flexible and more heat resistant than PLA and easier to work with than ABS. It shrinks little, is less likely to deform and is water-repellent. With PETG Economy you can make professional and large prints.

Read more about printing with PETG filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP13264
Amount:	0.75 kg	Inner diameter:	Ø 5.2 cm
Brand:	colorFabb	Outer diameter:	Ø 20.0 cm
Colour:	light grey	Spool width:	5.5 cm
Filament diameter:	2.85 mm	Tunnel code:	N/A
Heated bed temp:	70-80 °C	Packing group:	NO
Material:	PETG economy	Is liquid:	no
Nozzle temp range:	235-255 °C

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

© 2024 - 123-3d.ie