Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

M6 stainless steel nozzle, 2.85mm x 0.25mm

Description This nozzle is suitable for hot ends with an M6 thread and has an opening of 0.25mm and suitable for 2.85/3mm filament. The nozzle is made of stainless steel and will therefore wear less quickly. The size of the nozzle is neatly displayed on the nozzle.

Specifications

Hazard class:	N/A	Our item no:	DMK00029
Brand:	123-3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	RVS	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.25 mm

€16.00 (Incl. 23% VAT)
(€13.01 Excl. 23% VAT)

5-7 day delivery

M6 stainless steel nozzle, 2.85mm x 0.4mm

Zoom in

Description This nozzle is suitable for hot ends with an M6 thread and has an opening of 0.4mm and suitable for 2.85/3mm filament. The nozzle is made of stainless steel and will therefore wear less quickly. The nozzle size is neatly displayed on the nozzle.

Specifications

Hazard class:	N/A	Our item no:	DMK00030
Brand:	123-3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	RVS	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.4 mm

€16.00 (Incl. 23% VAT)
(€13.01 Excl. 23% VAT)

5-7 day delivery

M6 stainless steel nozzle, 2.85mm x 0.8mm

Zoom in

Description This nozzle is suitable for hot ends with an M6 thread and has an opening of 0.8mm and suitable for 2.85/3mm filament. The nozzle is made of stainless steel and will therefore wear less quickly. The nozzle size is neatly displayed on the nozzle.

Specifications

Hazard class:	N/A	Our item no:	DMK00031
Brand:	123-3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	RVS	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.8 mm

€16.00 (Incl. 23% VAT)
(€13.01 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00950
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.4 mm

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00951
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.6 mm

Order now, we can ship this tomorrow!

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

in stock

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00952
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.8 mm

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 1.00mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00953
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	1 mm

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Nozzle type:	MK8
Brand:	Bondtech	Our item no:	DAR00954
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal MK8 coated nozzle 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Nozzle type:	MK8
Brand:	Bondtech	Our item no:	DAR00955
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Nozzle type:	MK8
Brand:	Bondtech	Our item no:	DAR00956
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 1.00mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Nozzle type:	MK8
Brand:	Bondtech	Our item no:	DAR00957
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm (4-pack)

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on the hardware used, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Quantity:	4
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Our item no:	DAR00958

€183.00 (Incl. 23% VAT)
(€148.78 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.60mm

Zoom in

Description

This brass Bondtech CHT M6 nozzle has a nickel coating and is highly resistant to corrosion. The nozzle also produces less friction so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts and flows faster.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00071
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00072
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.00mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.0mm and is suitable for filament with a diameter of 175 mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00073
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00074
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.4 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.8mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00075
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.8 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00076
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle M6, 1.75 x 0.50mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.5mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00095
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.5 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

RepRap Micro Swiss A2 hard steel nozzle | M6 thread, 2.85mm x 0.4mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.4mm.

Compatible with the following printers and parts:
	●	Olson Block	●	Taz Workhorse
	●	Ultimate Maker 2+	●	Lulzbot SL Toolhead
	●	Printers with a E3D V4 / V5 / V6 3mm hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00003
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.4 mm

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

RapRap Micro Swiss A2 hard steel nozzle | M6 thread, 2.85mm x 0.6mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.6mm.

Compatible with the following printers and parts:
	●	Olson Block	●	Taz Workhorse
	●	Ultimate Maker 2+	●	Lulzbot SL Toolhead
	●	Printers with a E3D V4 / V5 / V6 3.00 mm hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00004
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.6 mm

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

RepRap Micro Swiss A2 hard steel nozzle | M6 thread, 2.85mm x 0.8mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.8mm.

Compatible with the following printers and parts:
	●	Olson Block	●	Taz Workhorse
	●	Ultimate Maker 2+	●	Lulzbot SL Toolhead
	●	Printers with a E3D V4 / V5 / V6 3.00 mm hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00005
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.8 mm

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.20mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.2mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Hazard class:	N/A	Our item no:	DMS00043
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.2 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.30mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.3mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Hazard class:	N/A	Our item no:	DMS00045
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.3 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.40mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.4mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Hazard class:	N/A	Our item no:	DMS00046
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.4 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.50mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.5mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Hazard class:	N/A	Our item no:	DMS00047
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.5 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.60mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.6mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Hazard class:	N/A	Our item no:	DMS00048
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.6 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.80mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.8mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Hazard class:	N/A	Our item no:	DMS00049
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.8 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for hexagon hotend | M6 thread, 2.85mm x 0.2mm

Zoom in

Description The Micro Swiss Brass nozzle is suitable for the hexagon hot end. The nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.2mm.

Compatible with the following printers:
	●	LulzBot Mini	●	LulzBot TAZ 6
	●	LulzBot TAZ 5	●	3D printers with a hexagon hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00057
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.2 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for hexagon hotend | M6 thread, 2.85mm x 0.3mm

Zoom in

Description The Micro Swiss Brass nozzle is suitable for the hexagon hot end. The nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.3mm.

Compatible with the following printers:
	●	LulzBot Mini	●	LulzBot TAZ 6
	●	LulzBot TAZ 5	●	3D printers with a hexagon hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00058
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.3 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for hexagon hotend | M6 thread, 2.85mm x 0.4mm

Zoom in

Description The Micro Swiss Brass nozzle is suitable for the hexagon hot end. The nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.4mm.

Compatible with the following printers:
	●	LulzBot Mini	●	LulzBot TAZ 6
	●	LulzBot TAZ 5	●	3D printers with a hexagon hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00059
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.4 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for hexagon hotend | M6 Thread, 2.85 x 0.5mm

Zoom in

Description This Micro Swiss brass nozzle is suitable for the hexagon hot end. The nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament possible.

The nozzle is suitable for filament with a diameter of 3.00mm and has an opening of 0.5mm.

Compatible with the following printers:
	●	LulzBot Mini	●	LulzBot TAZ 6
	●	LulzBot TAZ 5	●	3D printers with a hexagon hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00060
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.5 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for hexagon hotend | M6 Thread, 2.85mm x 0.6mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the hexagon hot end. The nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3.00mm and has an opening of 0.6mm.

Compatible with the following printers:
	●	LulzBot Mini	●	LulzBot TAZ 6
	●	LulzBot TAZ 5	●	3D printers with a hexagon hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00061
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.6 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for hexagon hotend | M6 Thread, 2.85mm x 0.8mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the hexagon hot end. The nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3.00mm and has an opening of 0.8mm.

Compatible with the following printers:
	●	LulzBot Mini	●	LulzBot TAZ 6
	●	LulzBot TAZ 5	●	3D printers with a hexagon hot end

Specifications

Hazard class:	N/A	Our item no:	DMS00062
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.8 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for hexagon hotend | M6 Thread, 2.85mm x 1.2mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the hexagon hot end. The nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3.00mm and has an opening of 1.2mm.

Compatible with the following printers:
	●	LulzBot Mini	●	LulzBot TAZ 6
	●	LulzBot TAZ 5	●	3D printers with a hexagon hotend

Specifications

Hazard class:	N/A	Our item no:	DMS00063
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	1.2 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Oscar3D VARIO ruby nozzle, 2.85mm x 0.60mm

Zoom in

Description The Oscar3D VARIO red ruby nozzle has a very fine point, which makes this nozzle extremely suitable for the finest print details. Thanks to the built-in ruby, one of the sturdiest materials in the world, the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.6mm. You can use the nozzle in combination with an E3D hot end/M6.

Specifications

Hazard class:	N/A	Our item no:	DOS00019
Brand:	Oscar 3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	ruby brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.6 mm

€93.00 (Incl. 23% VAT)
(€75.61 Excl. 23% VAT)

5-7 day delivery

Oscar3D VARIO ruby nozzle, 2.85mm x 0.80mm

Zoom in

Description The Oscar3D VARIO red ruby nozzle has a very fine point, which makes this nozzle extremely suitable for the finest print details. Thanks to the built-in ruby, one of the sturdiest materials in the world, the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.8mm. You can use the nozzle in combination with an E3D hot end/M6.

Specifications

Hazard class:	N/A	Our item no:	DOS00020
Brand:	Oscar 3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	ruby brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.8 mm

€93.00 (Incl. 23% VAT)
(€75.61 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Ultimaker Original+ Nozzles

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Ultimaker Original+ Nozzles