Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

BASF Ultrafuse blue TPC 45D filament 1.75mm, 0.5kg

Description This blue BASF Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00202
Amount:	0.5 kg	RAL colour no:	5002
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	blue	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

This product is end of life.

BASF Ultrafuse yellow TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made from Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230-250 °C
Brand:	BASF	Our item no:	DFB00203
Colour:	yellow	RAL colour no:	1003
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Material:	TPC 45D

This product is end of life.

BASF Ultrafuse green TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The green Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00204
Amount:	0.5 kg	RAL colour no:	6018
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this today!

€28.50 (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

in stock

BASF Ultrafuse neutral TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This neutral colour BASF Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFB00205
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	neutral	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon) (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

BASF Ultrafuse orange TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The orange Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00206
Amount:	0.5 kg	RAL colour no:	2008
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	orange	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

BASF Ultrafuse red TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The red Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Our item no:	DFB00207
Amount:	0.5 kg	RAL colour no:	3020
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	red	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no
Nozzle temp range:	230-250 °C

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon) (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

BASF Ultrafuse pink TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250 °C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Hazard class:	N/A	Nozzle temp range:	230-250 °C
Amount:	0.5 kg	Our item no:	DFB00208
Brand:	BASF	Inner diameter:	Ø 4.9 cm
Colour:	pink	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	5.7 cm
Filament print speed:	-	Tunnel code:	N/A
Heated bed temp:	0-30 °C	Packing group:	NO
Material:	TPC 45D	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon) (Incl. 23% VAT)
(€23.17 Excl. 23% VAT)

BASF Ultrafuse silver TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The silver Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230-250 °C
Brand:	BASF	Our item no:	DFB00209
Colour:	silver	RAL colour no:	9006
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Material:	TPC 45D

This product is end of life.

BASF Ultrafuse black TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230-250 °C
Brand:	BASF	Our item no:	DFB00210
Colour:	black	RAL colour no:	9005
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Material:	TPC 45D

This product is end of life.

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

1.75mm TPC

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

1.75mm TPC