Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

E3D Revo CR upgrade kit | 24V | 1.75mm (0.4mm nozzle)

Description With the E3D Revo CR upgrade kit you'll be able to change the nozzle without tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300ᵒC. The set includes a 24V Revo CR hot end with an interchangeable 0.4mm nozzle.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Compatible with the following printers:
	●	CR-20	●	Ender-5
	●	CR-20 Pro	●	Ender-5 Pro
	●	Ender-3	●	Ender-5 Plus
	●	Ender-3 Pro	●	Ender-6
	●	Ender-3 V2

Specifications

Hazard class:	N/A	Our item no:	DAR00758
Brand:	E3D	Tunnel code:	N/A
Max temp:	300 °C	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no
Power rating:	40 W	Voltage:	24 v

€99.00 (Incl. 23% VAT)
(€80.49 Excl. 23% VAT)

5-7 day delivery

E3D Revo CR upgrade kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description With the E3D Revo CR upgrade kit you can change the nozzle without tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300ᵒC. The set includes a 24V Revo CR hot end with four interchangeable 0.25mm, 0.4mm, 0.6mm and 0.8mm diameter nozzles.

The E3D Revo nozzles are equipped with their own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Compatible with the following printers:
	●	CR-20	●	Ender-5
	●	CR-20 Pro	●	Ender-5 Pro
	●	Ender-3	●	Ender-5 Plus
	●	Ender-3 Pro	●	Ender-6
	●	Ender-3 V2

Specifications

Hazard class:	N/A	Our item no:	DAR00760
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Power rating:	40 W	Voltage:	24 v

€149.00 (Incl. 23% VAT)
(€121.14 Excl. 23% VAT)

5-7 day delivery

E3D Revo CR upgrade kit | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description With the E3D Revo CR upgrade kit you are able to change the nozzle without the use of tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300ᵒC. The set includes a 12V Revo CR hot end with an interchangeable 0.4mm nozzle.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Compatible with the following printers:
	●	CR-10 Mini	●	CR-10S4
	●	CR-10	●	CR-10S5
	●	CR-10S

Just because a printer isn't on the list doesn't mean it won't work with Revo CR. As soon as we have confirmation of compatibility with other Creality printers, the list will be expanded.

Thanks to the Creality-specific thermistor, the Revo CR is compatible with the firmware on almost any standard Creality printer. However, you may need to replace/modify parts for full use.

Specifications

Hazard class:	N/A	Our item no:	DAR00757
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	12 v
Power rating:	40 W

€99.00 (Incl. 23% VAT)
(€80.49 Excl. 23% VAT)

5-7 day delivery

E3D Revo CR upgrade kit | 12V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description With the E3D Revo CR upgrade kit you can change the nozzle without tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300ᵒC. The set includes a 12V Revo CR hot end with four interchangeable 0.25mm, 0.4mm, 0.6mm and 0.8mm diameter nozzles.

The E3D Revo nozzles are equipped with their own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Compatible with the following printers:
	●	CR-10 Mini	●	CR-10S4
	●	CR-10	●	CR-10S5
	●	CR-10S

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Power rating:	40 W	Voltage:	12 v
Our item no:	DAR00759

€149.00 (Incl. 23% VAT)
(€121.14 Excl. 23% VAT)

5-7 day delivery

E3D Revo CR heatsink

Zoom in

Description The E3D Revo CR heatsink is designed to be used with Creality printers. The extra light construction provides improved, faster performance. The aluminium heatsink is anodised in black and therefore a nice addition to the other Creality parts.

Specifications

Hazard class:	N/A	Our item no:	DAR00763
Brand:	E3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Material:	aluminium	Is liquid:	no

€30.50 (Incl. 23% VAT)
(€24.80 Excl. 23% VAT)

5-7 day delivery

E3D Revo CR HeaterCore 24V

Zoom in

Description The E3D Revo CR HeaterCore is a 40W 24V heating element that can be easily exchanged with the E3D tool-free exchange system. The heater core is connected to the cold end via a spring and comes with a spring and a sock.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Power rating:	40 W	Voltage:	24 v
Our item no:	DAR00762

€35.00 (Incl. 23% VAT)
(€28.46 Excl. 23% VAT)

5-7 day delivery

E3D Revo CR HeaterCore 12V

Zoom in

Description The E3D Revo CR HeaterCore is a 40W 12V heating element that can be easily exchanged with the E3D tool-free exchange system. The heater core is connected to the cold end via a spring and comes with a spring and a sock.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Power rating:	40 W	Voltage:	12 v
Our item no:	DAR00761

€35.00 (Incl. 23% VAT)
(€28.46 Excl. 23% VAT)

5-7 day delivery

E3D Revo Six kit for V6 set-ups | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description The 12V Revo Six kit 0.4mm is a direct replacement for your E3D V6 hot end. This allows you to easily get all the benefits of E3D's RapidChange Revo ecosystem in one package. This model has the same height and diameter as the E3D V6 setup, allowing it to attach directly to your existing installation. All you need to do is plug in the Revo HeaterCore.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	12 v
Our item no:	DED00318

€101.00 (Incl. 23% VAT)
(€82.11 Excl. 23% VAT)

5-7 day delivery

E3D Revo Six kit for V6 set-ups | 12V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description The 12V Revo Six kit is a direct replacement for your E3D V6 hot end. This allows you to easily get all the benefits of E3D's RapidChange Revo ecosystem in one package. This model has the same height and diameter as the E3D V6 setup, allowing it to attach directly to your existing installation. All you need to do is plug in the Revo HeaterCore.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

This kit contains 4 Revo nozzles:

0.25mm (Yellow)
0.40mm (Red)
0.60mm (Blue)
0.80mm (Green)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DED00312	Voltage:	12 v

€159.00 (Incl. 23% VAT)
(€129.27 Excl. 23% VAT)

5-7 day delivery

E3D Revo Six kit for V6 set-ups | 24V | 1.75mm (0.4mm nozzle)

Zoom in

Description The 24 volt Revo Six kit 0.4mm is a direct replacement for your E3D V6 hot end. This allows you to easily get all the benefits of E3D's RapidChange Revo ecosystem in one package. This model has the same height and diameter as the E3D V6 setup, allowing it to attach directly to your existing installation. All you need to do is plug in the Revo HeaterCore.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Specifications

Hazard class:	N/A	Our item no:	DED00319
Brand:	E3D	Tunnel code:	N/A
Diameter:	13 mm	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	24 v

Order now, we can ship this today!

€101.00 (Incl. 23% VAT)
(€82.11 Excl. 23% VAT)

in stock

E3D Revo Six kit for V6 setups | 24V | 1.75mm (0.25/0.4/0.6/0.8 mm nozzles)

Zoom in

Description The 24V Revo Six kit is a direct replacement for your E3D V6 hot end. This allows you to easily get all the benefits of E3D's RapidChange Revo ecosystem in one package. This model has the same height and diameter as the E3D V6 setup, allowing it to attach directly to your existing installation. All you need to do is plug in the Revo HeaterCore.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

This kit contains 4 Revo nozzles:

0.25mm (Yellow)
0.40mm (Red)
0.60mm (Blue)
0.80mm (Green)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DED00313	Voltage:	24 v

€159.00 (Incl. 23% VAT)
(€129.27 Excl. 23% VAT)

5-7 day delivery

E3D Revo Micro screw mount kit | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description The 12V Revo Micro is a lot smaller and lighter than average, with the smallest heatsink E3D has designed yet. This hot end weighs only 30g, so you can get more speed out of your printer. The Revo Micro can be used for both Bowden and Direct drive printers.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Note: The Revo Micro fan must be connected using a 5V regulator unless it connects directly to a 5V pin.

Specifications

Hazard class:	N/A	Screwthread type:	M12
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	12 v
Our item no:	DED00316

€101.00 (Incl. 23% VAT)
(€82.11 Excl. 23% VAT)

5-7 day delivery

E3D Revo Micro Screw Mount Kit | 12V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description The 12-volt Revo Micro is a lot smaller and lighter than average, with the smallest heatsink E3D has designed yet. This HotEnd weighs only 30 grams, so you can get more speed out of your printer. The Revo Micro can be used for both Bowden and Direct drive printers.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without the use of extra tools.

This kit contains 4 Revo nozzles:

0.25mm (Yellow)
0.40mm (Red)
0.60mm (Blue)
0.80mm (Green)

Please note that the Revo Micro fan must be connected using a 5V regulator unless it connects directly to a 5V pin.

Specifications

Hazard class:	N/A	Screwthread type:	M12
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Our item no:	DED00310	Voltage:	12 v

€159.00 (Incl. 23% VAT)
(€129.27 Excl. 23% VAT)

5-7 day delivery

E3D Revo Micro screw mount kit | 24V | 1.75mm (0.4mm nozzle)

Zoom in

Description The 24V Revo Micro is a lot smaller and lighter than average, with the smallest heatsink E3D has designed yet. This hot end weighs only 30g, so you can get more speed out of your printer. The Revo Micro can be used for both Bowden and Direct drive printers.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Note: The Revo Micro fan must be connected using a 5V regulator unless it connects directly to a 5V pin.

Specifications

Hazard class:	N/A	Screwthread type:	M12
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	24 v
Our item no:	DED00317

€101.00 (Incl. 23% VAT)
(€82.11 Excl. 23% VAT)

5-7 day delivery

E3D Revo Micro screw mount kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description The 24V Revo Micro is a lot smaller and lighter than average, with the smallest heatsink E3D has designed yet. This hot end weighs only 30g, so you can get more speed out of your printer. The Revo Micro can be used for both Bowden and Direct drive printers.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

This kit contains 4 Revo nozzles:

0.25mm (Yellow)
0.40mm (Red)
0.60mm (Blue)
0.80mm (Green)

Please note that the Revo Micro fan must be connected using a 5V regulator unless it connects directly to a 5V pin.

Specifications

Hazard class:	N/A	Screwthread type:	M12
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Our item no:	DED00311	Voltage:	24 v

€159.00 (Incl. 23% VAT)
(€129.27 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera upgrade kit | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description The E3D Revo Hemera 12V upgrade kit contains all the parts you need to upgrade your existing Hemera with the power of RapidChanging. This kit includes a Hemera heatsink with a custom design, which is compatible with a Revo HeaterCore and Revo Nozzles.

This upgrade kit is easy to install: swap out your old Hemera heatsink and attach the Revo HeaterCore.

This kit includes the following:

1 x Revo Hemera sink
1 x Revo HeaterCore
1 x Revo HeaterCore spring
1 x Extension cable set
1 x Revo nozzle 0.40mm

Specifications

Hazard class:	N/A	Our item no:	DED00320
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	12 v

€79.00 (Incl. 23% VAT)
(€64.23 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera upgrade kit | 12V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description The E3D Revo Hemera 12V upgrade kit contains all the parts you need to upgrade your Hemera with the power of RapidChanging. This kit includes a Hemera heatsink with a custom design that is compatible with a Revo HeaterCore and Revo Nozzles. This upgrade kit is easy to install: swap out your old Hemera heatsink and attach the Revo HeaterCore.

This kit includes the following:

1 x Revo Hemera sink
1 x Revo Heater Core
1 x Revo HeaterCore Spring
1 x Extension Cable Set
1 x set of Revo nozzles 0.25mm/0.4mm/0.6mm/0.8mm

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	12 v
Our item no:	DED00314

€137.00 (Incl. 23% VAT)
(€111.38 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera upgrade kit | 24V | 1.75mm (0.4mm nozzle)

Zoom in

Description The E3D Revo Hemera 24V upgrade kit contains all the parts you need to upgrade your existing Hemera with the power of RapidChanging. This kit includes a Hemera heatsink with a custom design, which is compatible with a Revo HeaterCore and Revo Nozzles.

This upgrade kit is easy to install: swap out your old Hemera heatsink and attach the Revo HeaterCore.

This kit includes the following:

1 x Revo Hemera sink
1 x Revo HeaterCore
1 x Revo HeaterCore spring
1 x Extension cable set
1 x Revo nozzle 0.40mm

Specifications

Hazard class:	N/A	Our item no:	DED00321
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	24 v

€79.00 (Incl. 23% VAT)
(€64.23 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera upgrade kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description The E3D Revo Hemera 24V upgrade kit contains all the parts you need to upgrade your Hemera with the power of RapidChanging. This kit includes a Hemera heatsink with a custom design that is compatible with a Revo HeaterCore and Revo Nozzles. This upgrade kit is easy to install: swap out your old Hemera heatsink and attach the Revo HeaterCore.

This kit includes the following:

1 x Revo Hemera sink
1 x Revo Heater Core
1 x Revo HeaterCore Spring
1 x Extension Cable Set
1 x set of Revo nozzles 0.25mm/0.4mm/0.6mm/0.8mm

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	24 v
Our item no:	DED00315

€137.00 (Incl. 23% VAT)
(€111.38 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera high performance kit | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description Changing nozzles has never been easier than with the E3D Revo Hemera 12 volts. This is a compact, high-performance dual-gear extrusion system with the convenience of E3D's RapidChange Revo ecosystem nozzles with dual-drive gears. The hardened stainless steel drivetrain grabs filament from both sides and so Revo Hemera gives your 3D printer exceptional pushing power.

A tightly restricted filament path prevents material from bending on its way to the melt zone, making it a top choice for challenging filaments. This model is known for its excellent performance with flexible filament. The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Specifications

Hazard class:	N/A	Our item no:	DED00308
Brand:	E3D	Stepping angle:	1.8
Current rating:	1.33 A	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	12 v

€183.00 (Incl. 23% VAT)
(€148.78 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera high performance kit | 12V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description Changing nozzles has never been easier than with the E3D Revo Hemera 12 volts. This is a compact, high-performance dual-gear extrusion system with the convenience of E3D's RapidChange Revo ecosystem nozzles with dual-drive gears. The hardened stainless steel drivetrain grabs filament from both sides and so Revo Hemera gives your 3D printer exceptional pushing power.

A tightly restricted filament path prevents material from bending on its way to the melt zone, making it a top choice for challenging filaments. This model is known for its excellent performance with flexible filament. The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

This kit contains 4 Revo nozzles:

0.25mm (Yellow)
0.40mm (Red)
0.60mm (Blue)
0.80mm (Green)

Specifications

Hazard class:	N/A	Stepping angle:	1.8
Brand:	E3D	Tunnel code:	N/A
Current rating:	1.33 A	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	12 v
Our item no:	DED00306

€237.00 (Incl. 23% VAT)
(€192.68 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera high performance kit | 24V | 1.75mm

Zoom in

Description Changing nozzles has never been easier than with the E3D Revo Hemera 24 volts. This is a compact, high-performance dual-gear extrusion system with the convenience of E3D's RapidChange Revo ecosystem nozzles with dual-drive gears. The hardened stainless steel drivetrain grabs filament from both sides and so Revo Hemera gives your 3D printer exceptional pushing power.

A tightly restricted filament path prevents material from bending on its way to the melt zone, making it a top choice for challenging filaments. This model is known for its excellent performance with flexible filament. The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Specifications

Hazard class:	N/A	Our item no:	DED00309
Brand:	E3D	Stepping angle:	1.8
Current rating:	1.33 A	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	24 v

€183.00 (Incl. 23% VAT)
(€148.78 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera high performance kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description Changing nozzles has never been easier than with the E3D Revo Hemera 24 volts. This is a compact, high-performance dual-gear extrusion system with the convenience of E3D's RapidChange Revo ecosystem nozzles with dual-drive gears. The hardened stainless steel drivetrain grabs filament from both sides and so Revo Hemera gives your 3D printer exceptional pushing power.

A tightly restricted filament path prevents material from bending on its way to the melt zone, making it a top choice for challenging filaments. This model is known for its excellent performance with flexible filament. The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

This kit contains 4 Revo nozzles:

0.25mm (Yellow)
0.40mm (Red)
0.60mm (Blue)
0.80mm (Green)

Specifications

Hazard class:	N/A	Stepping angle:	1.8
Brand:	E3D	Tunnel code:	N/A
Current rating:	1.33 A	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	24 v
Our item no:	DED00307

€237.00 (Incl. 23% VAT)
(€192.68 Excl. 23% VAT)

5-7 day delivery

E3D Revo Voron upgrade kit | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description Upgrade your 3D printer with the 12V E3D Revo Voron upgrade kit. This coldside is intended to be used in combination with the Voron StealthBurner. The extra light construction provides improved, faster performance.

The E3D Revo nozzle is equipped with its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DAR00755	Voltage:	12 v

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€99.00 (coming soon) (Incl. 23% VAT)
(€80.49 Excl. 23% VAT)

E3D Revo Voron upgrade kit | 12V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description Upgrade your 3D printer with the 12V E3D Revo Voron upgrade kit. The kit contains four nozzles with diameters of 0.25, 0.4, 0.6 and 0.8mm. The nozzles have a maximum print temperature of 300°C.

The E3D Revo nozzles are equipped with their own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DAR00753	Voltage:	12 v

€163.00 (Incl. 23% VAT)
(€132.52 Excl. 23% VAT)

5-7 day delivery

E3D Revo Voron upgrade kit | 24V | 1.75mm (0.4mm nozzle)

Zoom in

Description Upgrade your 3D printer with the 24V E3D Revo Voron upgrade kit. This coldside is intended to be used in combination with the Voron StealthBurner. The extra light construction provides improved, faster performance.

The E3D Revo nozzle is equipped with its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DAR00754	Voltage:	24 v

€99.00 (Incl. 23% VAT)
(€80.49 Excl. 23% VAT)

5-7 day delivery

E3D Revo Voron upgrade kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description Upgrade your 3D printer with the 24 volt E3D Revo Voron upgrade kit. The kit contains four nozzles with diameters of 0.25mm, 0.4mm, 0.6mm and 0.8mm. The nozzles have a maximum print temperature of 300°C.

The E3D Revo nozzles are equipped with their own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DAR00752	Voltage:	24 v

€163.00 (Incl. 23% VAT)
(€132.52 Excl. 23% VAT)

5-7 day delivery

E3D Revo Voron heatsink

Zoom in

Description The Revo Voron heatsink is designed to be used with the Voron StealthBurner. The extra light construction provides improved, faster performance. The aluminium heatsink is anodised red and a nice addition to the other Voron parts.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DAR00756

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€35.00 (coming soon) (Incl. 23% VAT)
(€28.46 Excl. 23% VAT)

E3D Revo HeaterCore 12V

Zoom in

Description The E3D Revo HeaterCore is a 40W 12V heating element that can be easily exchanged within the E3D tool-free exchange system. The heater core is connected to the cold end via a spring and comes with a spring and a sock.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Power rating:	40 W	Voltage:	12 v
Our item no:	DAR00892

Order now, we can ship this today!

€35.00 (Incl. 23% VAT)
(€28.46 Excl. 23% VAT)

in stock

E3D Revo HeaterCore 24V

Zoom in

Description The E3D Revo HeaterCore is a 40W 24V heating element that can be easily exchanged within the E3D tool-free exchange system. The heater core is connected to the cold end via a spring and comes with a spring and a sock.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Max temp:	300 °C	Is liquid:	no
Power rating:	40 W	Voltage:	24 v
Our item no:	DAR00893

Order now, we can ship this today!

€35.00 (Incl. 23% VAT)
(€28.46 Excl. 23% VAT)

in stock

E3D Revo silicone sock kit (10-pack, 2 per size)

Zoom in

Description Keep your E3D Revo hot end insulated with these silicone socks. By using the sock you can keep the heater block clean and free of melted pieces of plastic.

It also reduces heat loss and improves print quality, especially when using a cooling fan.

Specifications

Hazard class:	N/A	Quantity:	10
Brand:	E3D	Tunnel code:	N/A
Material:	silicon	Packing group:	NO
Our item no:	DED00328	Is liquid:	no

Order now, we can ship this today!

€6.75 (Incl. 23% VAT)
(€5.49 Excl. 23% VAT)

in stock

E3D Revo brass nozzle 1.75mm, 0.15mm

Zoom in

Description This pink E3D Revo brass nozzle has a diameter of 0.15mm and works with 1.75mm filament from the E3D RapidChange Revo system. You can quickly and easily adjust your nozzle diameter at room temperature and change it without using additional tools.

The E3D Revo nozzle is equipped with its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.15 mm
Colour:	pink	Our item no:	DAR00856
Diameter:	13 mm	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Length:	41 mm	Packing group:	NO
Material:	brass	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€35.00 (coming soon) (Incl. 23% VAT)
(€28.46 Excl. 23% VAT)

E3D Revo brass nozzle 1.75mm, 0.25mm

Zoom in

Description With this E3D brass nozzle with a diameter of 0.25mm (yellow) for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.25 mm
Colour:	yellow	Our item no:	DED00324
Diameter:	13 mm	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Length:	41 mm	Packing group:	NO
Material:	brass	Is liquid:	no

Order now, we can ship this today!

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

in stock

E3D Revo brass nozzle 1.75mm, 0.40mm

Zoom in

Description With this red E3D brass nozzle with a diameter of 0.4mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change it without using additional tools.

The E3D Revo nozzle is equipped with its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.4 mm
Colour:	red	Our item no:	DED00325
Diameter:	13 mm	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Length:	41 mm	Packing group:	NO
Material:	brass	Is liquid:	no

Order now, we can ship this today!

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

in stock

E3D Revo brass nozzle 1.75mm, 0.60mm

Zoom in

Description With this blue E3D brass nozzle with a diameter of 0.6mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.6 mm
Colour:	blue	Our item no:	DED00326
Diameter:	13 mm	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Length:	41 mm	Packing group:	NO
Material:	brass	Is liquid:	no

Order now, we can ship this today!

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

in stock

E3D Revo brass nozzle 1.75mm, 0.80mm

Zoom in

Description With this green E3D brass nozzle with a diameter of 0.8mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.8 mm
Colour:	green	Our item no:	DED00327
Diameter:	13 mm	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Length:	41 mm	Packing group:	NO
Material:	brass	Is liquid:	no

Order now, we can ship this today!

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

in stock

E3D Revo brass nozzle kit | 1.75mm | 0.40mm (3-pack)

Zoom in

Description This E3D brass nozzle set contains 3 Revo nozzles with a diameter of 0.4mm in red. They are suitable for 1.75mm filament and the E3D RapidChange Revo system. You can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.4 mm
Brand:	E3D	Our item no:	DED00322
Colour:	red	Quantity:	3 Quantity
Diameter:	13 mm	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Length:	41 mm	Is liquid:	no
Material:	brass

€68.00 (Incl. 23% VAT)
(€55.28 Excl. 23% VAT)

5-7 day delivery

E3D Revo brass nozzle kit | 1.75mm| 0.25/0.60/0.80mm (3-pack)

Zoom in

Description With this E3D Revo nozzle pack you'll receive 3 Revo nozzles, with the diameters 0.25mm (yellow), 0.6mm (blue) and 0.8mm (green).

These brass nozzles for 1.75mm filament are suitable for the E3D RapidChange Revo system. With this system you can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.

Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Hazard class:	N/A	Our item no:	DED00323
Brand:	E3D	Quantity:	3
Diameter:	13 mm	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Length:	41 mm	Is liquid:	no
Material:	brass

€68.00 (Incl. 23% VAT)
(€55.28 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera XS kit | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description Revo Hemera XS is a compact dual drive extrusion system. Because it is lighter and shorter than the classic Hemera, it can move faster on the motion system of your 3D printer. This results in less latency, reducing printing artifacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it also works with the E3D V6 ecosystem.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	12 v
Our item no:	DAR00878

€184.00 (Incl. 23% VAT)
(€149.59 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera XS kit | 24V | 1.75mm (0.4mm nozzle)

Zoom in

Description Revo Hemera XS is a compact dual drive extrusion system. Because it is lighter and shorter than the classic Hemera, it can move faster on the motion system of your 3D printer. This results in less latency, reducing printing artifacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it also works with the E3D V6 ecosystem.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	24 v
Our item no:	DAR00879

€184.00 (Incl. 23% VAT)
(€149.59 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera XS kit | 12V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description Revo Hemera XS is a compact dual drive extrusion system. Because it is lighter and shorter than the classic Hemera, it can move faster on the motion system of your 3D printer. This results in less latency, reducing printing artifacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it also works with the E3D V6 ecosystem.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DAR00880	Voltage:	12 v

€282.00 (Incl. 23% VAT)
(€229.27 Excl. 23% VAT)

5-7 day delivery

E3D Revo Hemera XS kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description Revo Hemera XS is a compact dual drive extrusion system. Because it is lighter and shorter than the classic Hemera, it can move faster on the motion system of your 3D printer. This results in less latency, reducing printing artifacts such as ghosting. A specially designed heatsink makes it compatible with Revo Nozzles, and with the addition of a Hemera HeatBreak (sold separately) it also works with the E3D V6 ecosystem.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DAR00881	Voltage:	24 v

€282.00 (Incl. 23% VAT)
(€229.27 Excl. 23% VAT)

5-7 day delivery

E3D Revo Obxidian nozzle, 1.75mm x 0.40mm

Zoom in

Description Print fine details and complex shapes with the E3D Revo Obxidian nozzle. The interchangeable nozzle features the new E3DLC coating. This minimises the accumulation of plastic around the nozzle. The integrated heat break prevents incorrect assembly and a leaking hot end. The size is clearly indicated on the nozzle. This size nozzle is also provided with an individual colour, making it easy to recognize.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.4 mm
Brand:	E3D	Our item no:	DAR00912
Colour:	red	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	-	Packing group:	NO
Nozzle coating:	E3DLC	Is liquid:	no

€71.00 (Incl. 23% VAT)
(€57.72 Excl. 23% VAT)

5-7 day delivery

E3D Revo Obxidian nozzle, 1.75mm x 0.60mm

Zoom in

Description Print fine details and complex shapes with the E3D Revo Obxidian nozzle. The interchangeable nozzle features the new E3DLC coating. This minimises the accumulation of plastic around the nozzle. The integrated heat break prevents incorrect assembly and a leaking hot end. The size is clearly indicated on the nozzle. This size nozzle is also provided with an individual colour, making it easy to recognize.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.6 mm
Brand:	E3D	Our item no:	DAR00913
Colour:	blue	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	-	Packing group:	NO
Nozzle coating:	E3DLC	Is liquid:	no

Order now, we can ship this today!

€71.00 (Incl. 23% VAT)
(€57.72 Excl. 23% VAT)

in stock

E3D Revo ObXidian nozzle 1.75mm, 0.25mm

Zoom in

Description Print fine details and complex shapes with the E3D Revo Obxidian nozzle. The interchangeable nozzle features the new E3DLC coating. This minimises the accumulation of plastic around the nozzle. The integrated heat break prevents incorrect assembly and a leaking hot end. The size is clearly indicated on the nozzle. This size nozzle is also provided with an individual colour, making it easy to recognise.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.25 mm
Brand:	E3D	Our item no:	DAR00935
Colour:	yellow	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	-	Packing group:	NO
Nozzle coating:	E3DLC	Is liquid:	no

€71.00 (Incl. 23% VAT)
(€57.72 Excl. 23% VAT)

5-7 day delivery

E3D Revo ObXidian nozzle 1.75mm, 0.80mm

Zoom in

Description Print fine details and complex shapes with the E3D Revo Obxidian nozzle. The interchangeable nozzle features the new E3DLC coating. This minimises the accumulation of plastic around the nozzle. The integrated heat break prevents incorrect assembly and a leaking hot end. The size is clearly indicated on the nozzle. This size nozzle is also provided with an individual colour, making it easy to recognise.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.8 mm
Brand:	E3D	Our item no:	DAR00936
Colour:	green	Screwthread type:	Revo
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	-	Packing group:	NO
Nozzle coating:	E3DLC	Is liquid:	no

€71.00 (Incl. 23% VAT)
(€57.72 Excl. 23% VAT)

5-7 day delivery

E3D Revo Belt nozzle, 1.75mm x 0.40mm

Zoom in

Description The E3D Revo Belt nozzle 1.75mm x 0.40mm is specially designed to improve your belt printing experience. The nozzle is longer to allow printing at a 45 degree angle. Experiment freely with other Revo Belt nozzles, which can be changed by hand in just 60 seconds. These come in 3 different sizes so you always have one that fits your project perfectly. With these nozzles you can print small objects with high resolution or large prints in a short time. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion. The Revo belt nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Please note: Revo nozzles are not suitable for use with V6 heater blocks. You may also need to adjust your z-offset when you change nozzles.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.4 mm
Colour:	red	Our item no:	DAR01168
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	46.5 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

E3D Revo Belt nozzle, 1.75mm x 0.60mm

Zoom in

Description The E3D Revo Belt nozzle 1.75mm x 0.60mm is specially designed to improve your belt printing experience. The nozzle is longer to allow printing at a 45 degree angle. Experiment freely with other Revo Belt nozzles, which can be changed by hand in just 60 seconds. These come in 3 different sizes so you always have one that fits your project perfectly. With these nozzles you can print small objects with high resolution or large prints in a short time. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion. The Revo belt nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Please note: Revo nozzles are not suitable for use with V6 heater blocks. You may also need to adjust your z-offset when you change nozzles.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.6 mm
Colour:	blue	Our item no:	DAR01169
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	46.5 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

E3D Revo Belt nozzle, 1.75mm x 0.80mm

Zoom in

Description The E3D Revo Belt nozzle 1.75mm x 0.80mm is specially designed to improve your belt printing experience. The nozzle is longer to allow printing at a 45 degree angle. Experiment freely with other Revo Belt nozzles, which can be changed by hand in just 60 seconds. These come in 3 different sizes so you always have one that fits your project perfectly. With these nozzles you can print small objects with high resolution or large prints in a short time. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion. The Revo belt nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Please note: Revo nozzles are not suitable for use with V6 heater blocks. You may also need to adjust your z-offset when you change nozzles.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.8 mm
Colour:	green	Our item no:	DAR01170
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	46.5 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

E3D Revo High Flow nozzle, 1.75mm x 0.40mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.40mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.4 mm
Colour:	red	Our item no:	DAR01171
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	41.1 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

E3D Revo High Flow nozzle, 1.75mm x 0.60mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.60mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.6 mm
Colour:	blue	Our item no:	DAR01172
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	41.1 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

E3D Revo High Flow nozzle, 1.75mm x 0.80mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.80mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	0.8 mm
Colour:	green	Our item no:	DAR01173
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	41.1 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

E3D Revo High Flow nozzle, 1.75mm x 1.00mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.00mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	1 mm
Colour:	black	Our item no:	DAR01174
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	41.1 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

E3D Revo High Flow nozzle, 1.75mm x 1.20mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.20mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	1.2 mm
Colour:	purple	Our item no:	DAR01175
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	41.1 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

E3D Revo High Flow nozzle, 1.75mm x 1.40mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.40mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Hazard class:	N/A	Nozzle coating:	none
Brand:	E3D	Nozzle diameter:	1.4 mm
Colour:	orange	Our item no:	DAR01176
Filament diameter:	1.75 mm	Screwthread type:	Revo
Dimensions:	41.1 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

€52.50 (Incl. 23% VAT)
(€42.68 Excl. 23% VAT)

5-7 day delivery

E3D Revo Creality Coldside kit

Zoom in

Description This Revo Creality Coldside kit allows you to change your nozzle in 60 seconds and without tools. The kit contains everything you need to install your new setup. This kit is suitable for the Creality Ender 3, Ender 3S, Ender 3 Pro, Ender v2, Ender 5, Ender 5 Pro, Ender 5 Plus, Ender 6, Ender 2 Pro, CR10, CR10S, CR10 S4, CR10 S5 & CR20 Mini.

This kit contains:
1 x Creality heatsink
1 x butt splice connectors (5-pack)
1 x Heater extension
1 x Thermistor extension

Please note: Hotsides are NOT included

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€44.50 (coming soon) (Incl. 23% VAT)
(€36.18 Excl. 23% VAT)

E3D Revo Creality Sprite Coldside kit

Zoom in

Description With this Revo Creality Sprite Coldside kit you can change your nozzle within 60 seconds and without tools. This product comes with a CR touch spacer and an optimized part cooling fan shroud. The kit is suitable for the Creality 3 S1.

This kit contains:
2 x M2 x 6 Self tapping screws
2 x M3x12 Socket head screws
2 x M3x4 Button head screws
1 x Crealty Sprite Revo Adapter
1 x Creality Sprite Fan Duct
1 x Z-probe spacer

Please note: Hotsides are NOT included

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€16.50 (coming soon) (Incl. 23% VAT)
(€13.41 Excl. 23% VAT)

E3D Revo LGX Coldside, Direct

Zoom in

Description Ensure smooth and consistent extrusion with the Revo LGX Coldside. The combination of the Revo Micro and the LGX extruder from Bondtech makes it easy to create high-quality 3D prints. The compact and lightweight design can be used with various types of filament and has an excellent grip on the filament. The LGX extruder delivers the filament smoothly, which reduces the chance of clogging. In addition, this kit prevents heat creep, even during long 3D printing sessions.

This kit contains:
1 x LGX Extruder
1 x 5v Fan
1 x Bowden clip
1 x Metal Bowden collet
1 x Heater cable
1 x Sensor cable
1 x Revo Micro Heatsink
1 x 5v Regulator board
1 x fan cable
1 x LGX adapter
1 x Bowden tube

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€154.50 (coming soon) (Incl. 23% VAT)
(€125.61 Excl. 23% VAT)

E3D Roto Coldside Packed including cables and fan

Zoom in

1
0

Description The Roto Coldside Packed including cables and fan is a lightweight, powerful extruder that is easy to install. The design offers enough extrusion power to be used in combination with the Revo High Flow nozzles. In addition, you can easily change the nozzle and filament with just one hand. The Roto Coldside has a unique 3D printed metal heatsink, which is optimised to prevent heat creep. This product comes with cables and fan. The Roto Coldside weighs 140g and is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x LGX Extruder
1 x 5v fan
1 x Bowden clip
1 x Metal Bowden collet
1 x Heater cable
1 x Sensor cable
1 x Revo Micro Heatsink
1 x 5v Regulator board
1 x fan cable
1 x LGX adapter
1 x Bowden tube

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€176.50 (coming soon) (Incl. 23% VAT)
(€143.50 Excl. 23% VAT)

E3D Roto Coldside with bowdapter and cables

Zoom in

1
0

Description The Roto Coldside Packed including cables and fan is a lightweight, powerful extruder that is easy to install. The design offers enough extrusion power to be used in combination with the Revo High Flow nozzles. In addition, you can easily change the nozzle and filament with just one hand. The Roto Coldside has a unique 3D printed metal heatsink, which is optimised to prevent heat creep. This product comes with a bowdaptor and cables. The Roto Coldside weighs 140g and is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x Revo Motor with cable
1 x Fixings kit
1 x Bowdaptor
2 x Heatsink washers
1 x Bowden tube

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€176.50 (coming soon) (Incl. 23% VAT)
(€143.50 Excl. 23% VAT)

E3D Roto Coldside Packed including sensors, cables and fan

Zoom in

1
0

Description The Roto Coldside Packed including cables and fan is a lightweight, powerful extruder that is easy to install. The design offers enough extrusion power to be used in combination with the Revo High Flow nozzles. In addition, you can easily change the nozzle and filament with just one hand. The Roto Coldside has a unique 3D printed metal heatsink, which is optimised to prevent heat creep. This product comes with sensors, cables and a fan. The Roto Coldside weighs 140g and is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x Revo Motor with cable
1 x 3 wire fan with cable
1 x Fixings kit
1 x Roto coldside assembly
1 x Bowden tube
1 x Heatsink thermistor with cable
1 x Filament sensor with cable

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€235.50 (coming soon) (Incl. 23% VAT)
(€191.46 Excl. 23% VAT)

E3D Revo Six 12V Coldside

Zoom in

Description Upgrade your V6 setup with this coldside kit, allowing you to change your nozzle in under 60 seconds without tools. This kit also includes a replacement Revo heatsink and everything you need to mount this setup on your 3D printer. This kit uses 12V.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	12 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon) (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

E3D Revo Six 24V Coldside

Zoom in

Description Upgrade your V6 setup with this coldside kit, allowing you to change your nozzle in under 60 seconds without tools. This kit also includes a replacement Revo heatsink and everything you need to mount this setup on your 3D printer. This kit uses 12V.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€44.50 (coming soon) (Incl. 23% VAT)
(€36.18 Excl. 23% VAT)

E3D Revo High Flow Hotside, Fully Loaded, 1.75mm 24 Volt 60W

Zoom in

Description Start high-flow 3D printing in just 30 seconds with this Revo High Flow Hotside. This hotside has the same form factor as the standard E3D Revo, so you don't have to change anything to your setup. The 60W power provides extra power for printing with filaments that require higher temperatures. This product uses 24V and has a diameter of 0.4mm. It is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x 60W 24V HeaterCore with Spring & Sock
1 x 0.60mm Revo High Flow Nozzle & Sock
1 x 0.80mm Revo High Flow Nozzle & Sock
1 x 1.00mm Revo High Flow Nozzle & Sock
1 x 1.20mm Revo High Flow Nozzle & Sock

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€235.50 (coming soon) (Incl. 23% VAT)
(€191.46 Excl. 23% VAT)

E3D Revo 12V Starter Hotside kit

Zoom in

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 12V.

This kit contains:
1 x 40W HeaterCore (12V or 24V, 104NT or 100k)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	12 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€65.50 (coming soon) (Incl. 23% VAT)
(€53.25 Excl. 23% VAT)

E3D Revo 24V Starter Hotside kit

Zoom in

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 24V.

This kit contains:
1 x 40W HeaterCore (12V or 24V, 104NT or 100k)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€54.50 (coming soon) (Incl. 23% VAT)
(€44.31 Excl. 23% VAT)

E3D Revo 12V Creality Starter Hotside kit

Zoom in

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 12V.

Please note: The Creality Starter Hotside kit includes a HeaterCore that is specific to Creality. This can NOT be used with other 3D printing brands.

This kit contains:
1 x 40W HeaterCore (12V or 24V, 104NT or 100k)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	12 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€65.50 (coming soon) (Incl. 23% VAT)
(€53.25 Excl. 23% VAT)

E3D Revo 24V Creality Starter Hotside kit

Zoom in

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 24V.

Please note: The Creality Starter Hotside Kit includes a HeaterCore that is specific to Creality. This can NOT be used with other 3D printing brands.

This kit contains:
1 x 40W HeaterCore (12V or 24V, 104NT or 100k)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€65.50 (coming soon) (Incl. 23% VAT)
(€53.25 Excl. 23% VAT)

E3D Revo 24V Creality Sprite Starter Hotside kit

Zoom in

Description This Revo Starter Hotside Kit is ideal if you mainly print with PLA, PETG and ASA. The two brass nozzles and the 40W heater core offer you the possibility to 3D print with two common nozzle sizes. Within 60 seconds you can change your nozzle without using tools. This product works with 24V.

Please note: The Creality Starter Hotside Kit includes a HeaterCore that is specific to Creality. This can NOT be used with other 3D printing brands.

This kit contains:
1 x 40W HeaterCore (12V or 24V, 104NT or 100k)
1 x 0.6mm Brass Revo Nozzle
1 x 0.4mm Brass Revo Nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€65.50 (coming soon) (Incl. 23% VAT)
(€53.25 Excl. 23% VAT)

E3D Revo 24V PT100 Genius Metal Hotside kit

Zoom in

Description Discover new possibilities with the PT100 Genius Metal Hotside kit from Revo. This kit allows you to print with almost all filaments on the market and reaches temperatures of up to 400˚C. Thanks to the 0.4mm Revo DiamondBack nozzle you can also print filaments with added metal or ceramic particles. The 60W HeaterCore and the High Flow nozzle allow you to easily print high flow. The kit also comes with a 0.25mm nozzle for delicate prints and a non-planar nozzle. This product works with 24V.

This kit contains:
1 x 0.40mm ObXidian Nozzle
1 x 0.40mm Non-Planar Nozzle
1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
1 x 0.60mm HF ObXidian Nozzle
1 x 0.40mm DiamondBack
1 x 60W HeaterCore
1 x High-Temp HeaterBlock
1 x High Precision Heater Cartridge
1 x 0.25mm Brass Nozzle
1 x Fully Loaded Sock Pack

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

.

€469.50 (coming soon) (Incl. 23% VAT)
(€381.71 Excl. 23% VAT)

E3D Revo 24V PT1000 Genius Metal Hotside kit

Zoom in

Description Discover new possibilities with the PT100 Genius Metal Hotside kit from Revo. This kit allows you to print with almost all filaments on the market and reaches temperatures of up to 400˚C. Thanks to the 0.4mm Revo DiamondBack nozzle you can also print filaments with added metal or ceramic particles. The 60W HeaterCore and the High Flow nozzle allow you to easily print high flow. The kit also comes with a 0.25mm nozzle for delicate prints and a non-planar nozzle. This product works with 24V.

This kit contains:
1 x 0.40mm ObXidian Nozzle
1 x 0.40mm Non-Planar Nozzle
1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
1 x 0.60mm HF ObXidian Nozzle
1 x 0.40mm DiamondBack
1 x 60W HeaterCore
1 x High-Temp HeaterBlock
1 x High Precision Heater Cartridge
1 x 0.25mm Brass Nozzle
1 x Fully Loaded Sock Pack

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€399.50 (coming soon) (Incl. 23% VAT)
(€324.80 Excl. 23% VAT)

E3D Revo 24V PT100 Genius Hotside kit

Zoom in

Description Push your boundaries with the PT100 Genius Metal Hotside kit from Revo. This kit gives you the freedom to print with almost any filament on the market and reaches high temperatures of up to 400˚C. This kit also comes with a 0.25mm nozzle for delicate prints and a non-planar nozzle. Thanks to the 60W HeaterCore and High Flow nozzle you can print high flow. This product works with 24V.

This kit contains:
1 x 0.40mm ObXidian Nozzle
1 x 0.40mm Non-Planar Nozzle
1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
1 x 0.60mm High Flow ObXidian Nozzle
1 x 60W HeaterCore
1 x High-Temp HeaterBlock
1 x High Precision Heater Cartridge
1 x 0.25mm Brass Nozzle
1 x Fully Loaded Sock Pack

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€294.50 (coming soon) (Incl. 23% VAT)
(€239.43 Excl. 23% VAT)

E3D Revo 24V PT1000 Genius Hotside kit

Zoom in

Description Push your boundaries with the PT1000 Genius Metal Hotside kit from Revo. This kit gives you the freedom to print with almost any filament on the market and reaches high temperatures of up to 400˚C. This kit also comes with a 0.25mm nozzle for delicate prints and a non-planar nozzle. Thanks to the 60W HeaterCore and High Flow nozzle you can print high flow. This product works with 24V.

This kit contains:
1 x 0.40mm ObXidian Nozzle
1 x 0.40mm Non-Planar Nozzle
1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
1 x 0.60mm High Flow ObXidian Nozzle
1 x 60W HeaterCore 1 x High-Temp HeaterBlock
1 x High Precision Heater Cartridge
1 x 0.25mm Brass Nozzle
1 x Fully Loaded Sock Pack

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€264.50 (coming soon) (Incl. 23% VAT)
(€215.04 Excl. 23% VAT)

E3D Revo 24V High Flow Hotside kit

Zoom in

Description Reach top speeds with this High Flow Hotside kit from Revo. The special high flow technology ensures an improved flow rate of up to 70%. This hotside kit has a 60W HeaterCore and brass high flow nozzles. This product works with 24V.

This kit contains:
1 x 0.4mm High Flow Brass Nozzle
1 x 0.6mm High Flow Brass Nozzle
1 x 60W HeaterCore
1 x Fully-Loaded Sock Pack
1 x 0.4mm Brass Nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€139.50 (coming soon) (Incl. 23% VAT)
(€113.41 Excl. 23% VAT)

E3D Revo 24V High Flow X Hotside kit

Zoom in

Description Reach top speeds with this High Flow X Hotside kit from Revo. Thanks to the high flow technology, the flow rate is improved by up to 55%. In addition, this hotside kit has a 60W HeaterCore and robust ObXidian high flow nozzles. This also allows you to print high flow with abrasive materials, such as filaments reinforced with glass or carbon particles. This product works with 24V.

This kit contains:
1 x 0.4mm HF ObXidian Nozzle
1 x 0.6mm HF ObXidian Nozzle
1 x 60W HeaterCore
1 x Fully-Loaded Sock Pack
1 x 0.4mm Brass Nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€193.50 (coming soon) (Incl. 23% VAT)
(€157.32 Excl. 23% VAT)

E3D Revo PT100 High Temperature Assembly / High Temperature Abrasive kit

Zoom in

Description Upgrade your setup with this PT100 Revo High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 400˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HT-Abrasive 0.4mm nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€181.50 (coming soon) (Incl. 23% VAT)
(€147.56 Excl. 23% VAT)

E3D Revo Fully Loaded PT100 High Temperature Assembly / High Temperature Abrasive kit

Zoom in

Description Upgrade your setup with this PT100 Revo High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 400˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HT-Abrasive 0.25mm, 0.4mm, 0.6mm and 0.8mm nozzles

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€315.50 (coming soon) (Incl. 23% VAT)
(€256.50 Excl. 23% VAT)

E3D Revo PT100 (Packed) High Temperature Hotside Assembly kit

Zoom in

Description Upgrade your setup with this PT100 Revo High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 400˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€98.50 (coming soon) (Incl. 23% VAT)
(€80.08 Excl. 23% VAT)

E3D Revo Ultra-High Temperature Assembly, PT100, High Temperature Abrasive

Zoom in

Description Upgrade your setup with this PT100 Revo Ultra-High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 500˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HT-Abrasive 0.4mm nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€220.50 (coming soon) (Incl. 23% VAT)
(€179.27 Excl. 23% VAT)

E3D Revo Ultra-High Temperature Assembly, Fully Loaded, PT100, High Temperature Abrasive

Zoom in

Description Upgrade your setup with this PT100 Revo Ultra-High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 500˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HT-Abrasive 0.25mm, 0.4mm, 0.6mm and 0.8mm nozzles

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€389.50 (coming soon) (Incl. 23% VAT)
(€316.67 Excl. 23% VAT)

E3D Revo Ultra-High Temperature Hotside Assembly, PT100 (Packed)

Zoom in

Description Upgrade your setup with this PT100 Revo Ultra-High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 500˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€155.50 (coming soon) (Incl. 23% VAT)
(€126.42 Excl. 23% VAT)

E3D Revo PT1K High Temperature Assembly / High Temperature Abrasive kit

Zoom in

Description Upgrade your setup with this PT1000 Revo High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 400˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HT-Abrasive 0.4mm nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€181.50 (coming soon) (Incl. 23% VAT)
(€147.56 Excl. 23% VAT)

E3D Revo Fully Loaded PT1K High Temperature Assembly / High Temperature Abrasive kit

Zoom in

Description Upgrade your setup with this PT1000 Revo High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 400˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HT-Abrasive 0.25mm, 0.4mm, 0.6mm and 0.8mm nozzles

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€319.50 (coming soon) (Incl. 23% VAT)
(€259.76 Excl. 23% VAT)

E3D Revo PT1K (Packed) High Temperature Hotside Assembly kit

Zoom in

Description Upgrade your setup with this PT1000 Revo High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 400˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€98.50 (coming soon) (Incl. 23% VAT)
(€80.08 Excl. 23% VAT)

E3D Revo Ultra-High Temperature Assembly, PT1K, High Temperature Abrasive

Zoom in

Description Upgrade your setup with this PT1000 Revo Ultra-High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 500˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HT-Abrasive 0.4mm nozzle

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€231.50 (coming soon) (Incl. 23% VAT)
(€188.21 Excl. 23% VAT)

E3D Revo Ultra-High Temperature Assembly, Fully Loaded, PT1K, High Temperature Abrasive

Zoom in

Description Upgrade your setup with this PT1000 Revo Ultra-High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 500˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring
1 x Revo HT-Abrasive 0.25mm, 0.4mm, 0.6mm and 0.8mm nozzles

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€385.50 (coming soon) (Incl. 23% VAT)
(€313.41 Excl. 23% VAT)

E3D Revo Ultra-High Temperature Hotside Assembly, PT1K (Packed)

Zoom in

Description Upgrade your setup with this PT1000 Revo High Temperature Assembly and easily print at higher temperatures. The nozzle has a hardened steel tip and a copper segment for optimal heat transfer. In addition, it has a chrome nitride coating, which makes it wear-resistant up to 400˚C. This product is suitable for filament with a diameter of 1.75mm and works with 24V and 40W or 65W. The kit is compatible with the Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2, Revo LGX.

This kit contains:
1 x HT block
1 x PT100 or PT1000 sensor
1 x High precision (HT) or High Temperature (UHT) heater cartridge
1 x Revo spring

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€156.50 (coming soon) (Incl. 23% VAT)
(€127.24 Excl. 23% VAT)

E3D Revo High Flow Hotside 1.75mm 24 Volt 60 Watt 0.6mm

Zoom in

1
0

Description Start high-flow 3D printing in just 30 seconds with this Revo High Flow Hotside. This hotside has the same form factor as the standard E3D Revo, so you don't have to change anything to your setup. The 60W power provides extra power for printing with filaments that require a higher temperature. This product uses 24V and has a diameter of 0.6mm. It is suitable for filament with a diameter of 1.75mm.

This kit contains:
1 x 60W 24V Heater Core
1 x 0.6mm Revo HighFlow Nozzle
1 x Revo Spring

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	E3D	Is liquid:	no
Filament diameter:	1.75 mm	Voltage:	24 v
Tunnel code:	N/A

Please note: The delivery time for this item is currently unknown.

€78.50 (coming soon) (Incl. 23% VAT)
(€63.82 Excl. 23% VAT)

E3D Revo Rapid Change Diamond Nozzle Assembly, 0.25mm

Zoom in

Description Easily print fibre, metal, or ceramic reinforced filaments with the Rapid Change Diamond nozzle from Revo. This nozzle has a polychrystalline diamond tip, which extends its lifespan. The hardness, wear resistance, and heat conductivity of this material make it ideal for 3D printing. The product comes complete with a nozzle and heat break, and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.25mm, is suitable for 1.75mm filament, and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.25 mm
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€232.50 (coming soon) (Incl. 23% VAT)
(€189.02 Excl. 23% VAT)

E3D Revo Rapid Change Diamond Nozzle Assembly, 0.40mm

Zoom in

Description Easily print fibre, metal, or ceramic reinforced filaments with the Rapid Change Diamond nozzle from Revo. This nozzle has a polychrystalline diamond tip, which extends its lifespan. The hardness, wear resistance, and heat conductivity of this material make it ideal for 3D printing. The product comes complete with a nozzle and heat break, and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.40mm, is suitable for 1.75mm filament, and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.4 mm
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€232.50 (coming soon) (Incl. 23% VAT)
(€189.02 Excl. 23% VAT)

E3D Revo Rapid Change Diamond Nozzle Assembly, 0.60mm

Zoom in

Description Easily print fibre, metal, or ceramic reinforced filaments with the Rapid Change Diamond nozzle from Revo. This nozzle has a polychrystalline diamond tip, which extends its lifespan. The hardness, wear resistance, and heat conductivity of this material make it ideal for 3D printing. The product comes complete with a nozzle and heat break, and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.60mm, is suitable for 1.75mm filament, and can handle a maximum temperature of 300°C.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.6 mm
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€232.50 (coming soon) (Incl. 23% VAT)
(€189.02 Excl. 23% VAT)

E3D Revo Rapid Change Diamond Nozzle Assembly, 0.80mm

Zoom in

Description Easily print fibre, metal, or ceramic reinforced filaments with the Rapid Change Diamond nozzle from Revo. This nozzle has a polychrystalline diamond tip, which extends its lifespan. The hardness, wear resistance, and heat conductivity of this material make it ideal for 3D printing. The product comes complete with a nozzle and heat break, and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.80mm, is suitable for 1.75mm filament, and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.8 mm
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	300 °C	Is liquid:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€232.50 (coming soon) (Incl. 23% VAT)
(€189.02 Excl. 23% VAT)

E3D Revo High Flow ObXidian nozzle, 1.75mm x 0.40mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.4mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	0.4 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50 (coming soon) (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

E3D Revo High Flow ObXidian nozzle, 1.75mm x 0.60mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.6mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	0.6 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50 (coming soon) (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

E3D Revo High Flow ObXidian nozzle, 1.75mm x 0.80mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.8mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	0.8 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50 (coming soon) (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

E3D Revo High Flow ObXidian nozzle, 1.75mm x 1.0mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.0mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	1 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50 (coming soon) (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

E3D Revo High Flow ObXidian nozzle, 1.75mm x 1.20mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.2mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	1.2 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50 (coming soon) (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

E3D Revo High Flow ObXidian nozzle, 1.75mm x 1.40mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.4mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	1.4 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50 (coming soon) (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

E3D Revo

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

E3D Revo