Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

E3D nylon tubing for water-cooling kit, 1m

Description The Nylon tube set from E3D is mainly developed for use in water cooling systems. The tube is 100cm long and has an inner diameter of 2mm and an outer diameter of 4mm.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Our item no:	DED00253	Is liquid:	no

Order now, we can ship this today!

€6.75 (Incl. 23% VAT)
(€5.49 Excl. 23% VAT)

in stock

E3D V6 Bowden coupling, 3mm

Zoom in

Description This high-quality pneumatic push fit coupling can be mounted directly on an E3D bowden heatsink. The coupling can also be used for other components where a PTFE (Teflon) tube is desired. The coupling has a 1/8" wire and is completely drilled out, allowing a PTFE (Teflon) tube to pass through in its entirety.

Suitable for PTFE (Teflon) tube with an outer diameter of 1/4" / 6mm.

Specifications

Hazard class:	N/A	Thread size:	-
Brand:	E3D	Tunnel code:	N/A
Our item no:	DED00006	Packing group:	NO
Screw thread length:	8 mm	Is liquid:	no

Order now, we can ship this today!

€3.15 (Incl. 23% VAT)
(€2.56 Excl. 23% VAT)

in stock

E3D V6 Bowden coupling

Zoom in

Description This high-quality pneumatic push fit coupling can be mounted directly on an E3D bowden heatsink. The coupling can also be used for other components where a PTFE (Teflon) tube is desired. The coupling has a 1/8" thread and is fully drilled out, allowing a PTFE (Teflon) tube to run through in its entirety.

Suitable for PTFE (Teflon) pipe with an outer diameter of 4mm.

Specifications

Hazard class:	N/A	Thread size:	-
Brand:	E3D	Tunnel code:	N/A
Our item no:	DED00050	Packing group:	NO
Screw thread length:	8 mm	Is liquid:	no

Order now, we can ship this today!

€3.00 (Incl. 23% VAT)
(€2.44 Excl. 23% VAT)

in stock

E3D embedded bowden clutch

Zoom in

Description This coupling makes it possible to make a Bowden coupling in a simple and effective way. The coupling is compatible with E3D v6 1.75mm hot ends and accepts PTFE tubing with an outer diameter of 4mm. The Bowden coupling can also be mounted in, for example, aluminium or printed objects. A hole with a diameter of 8mm and 6mm deep is suitable for mounting the brass coupling.

Specifications

Hazard class:	N/A	Material:	brass
Brand:	E3D	Our item no:	DED00046
Depth:	6 mm	Tunnel code:	N/A
Diameter:	8 mm	Packing group:	NO
Inner diameter:	4 mm	Is liquid:	no

Order now, we can ship this today!

€3.15 (Incl. 23% VAT)
(€2.56 Excl. 23% VAT)

in stock

E3D collet clip, 1.75mm (2-pack)

Zoom in

Description With this collet clip you can fix the PTFE tube in your E3D hot end. It counteracts the small movements that occur during retraction of the filament. The collet clip ensures an even better print result. 2 per pack.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Our item no:	DED00122	Is liquid:	no
Quantity:	2

Order now, we can ship this today!

€1.35 (Incl. 23% VAT)
(€1.10 Excl. 23% VAT)

in stock

E3D embedded bowden coupling, 3mm

Zoom in

Description This coupling makes it possible to create a Bowden coupling in a simple and effective way. The coupling is compatible with E3D v6 3mm Bowden hotends and accepts 6mm OD PTFE tubing. The Bowden coupling can also be mounted on aluminium or printed objects. The brass coupling can be mounted in a hole with a diameter of 13mm and a depth of 5mm.

Specifications

Hazard class:	N/A	Our item no:	DED00056
Brand:	E3D	Tunnel code:	N/A
Depth:	5 mm	Packing group:	NO
Inner diameter:	6 mm	Is liquid:	no
Outer diameter:	13 mm

Order now, we can ship this today!

€3.75 (Incl. 23% VAT)
(€3.05 Excl. 23% VAT)

in stock

E3D Bowden adapter, 1.75mm

Zoom in

Description Easily make a Bowden connection to your extruder with this Bowden groovemount adapter. Suitable for 1.75mm filament. The coupling is suitable for PTFE pipe with an outer diameter of 4mm.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DED00070

Order now, we can ship this today!

€9.00 (Incl. 23% VAT)
(€7.32 Excl. 23% VAT)

in stock

E3D Bowden adapter, 3mm

Zoom in

Description Easily make a Bowden connection to your extruder with this Bowden groovemount adapter. Suitable for 2.85mm filament. The coupling is suitable for PTFE tube with an outer diameter of 6mm.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	2.85 mm	Is liquid:	no
Our item no:	DED00071

Order now, we can ship this today!

€9.00 (Incl. 23% VAT)
(€7.32 Excl. 23% VAT)

in stock

E3D collet clip, 3mm (2-pack)

Zoom in

Description With this collet clip you can fix the PTFE tube in your E3D hot end. It counteracts the small movements that occur during retraction of the filament. The collet clip ensures an even better print result. This pack contains 2 clips.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Colour:	red	Is liquid:	no
Our item no:	DED00139

Order now, we can ship this today!

€2.00 (Incl. 23% VAT)
(€1.63 Excl. 23% VAT)

in stock

PTFE Teflon tube, 2mm/4mm diameter (100mm length)

Zoom in

Description This PTFE tube is suitable for Bowden extruders and is quite flexible. The package contains 1 piece of Teflon tube 100mm long, with an inner diameter of 2mm and an outer diameter of 4mm.

Specifications

Hazard class:	N/A	Outer diameter:	4 mm
Brand:	123-3D	Our item no:	DBW00010
Filament diameter:	1.75 mm	Tunnel code:	N/A
Inner diameter:	2 mm	Packing group:	NO
Length:	10 cm	Is liquid:	no
Material:	PTFE

Order now, we can ship this today!

€1.45 (Incl. 23% VAT)
(€1.18 Excl. 23% VAT)

in stock

Capricorn Premium Ultra-Sharp PTFE Cutter

Zoom in

Description With this Ultra-Sharp PTFE cutter from Capricorn you ensure that your PTFE tube always has a nice cut side.
The stainless steel blade cuts effortlessly through the material. This cutter is suitable for PTFE pipe up to 6mm outside diameter.

Specifications

Hazard class:	N/A	Our item no:	DBW00035
Brand:	Capricorn	Tunnel code:	N/A
Colour:	blue	Packing group:	NO
Dimensions:	27 x 25 x 80 mm	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.50 (coming soon) (Incl. 23% VAT)
(€10.98 Excl. 23% VAT)

123-3D Ultra-Sharp PTFE cutter

Zoom in

Description With this Ultra-Sharp PTFE cutter from 123-3D you ensure that your PTFE tube always has a nice cut edge.
The steel blade cuts effortlessly through the material. This cutter is suitable for PTFE pipe up to 6mm outer diameter.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	blue	Is liquid:	no
Our item no:	DAR01242

Order now, we can ship this today!

€9.50 (Incl. 23% VAT)
(€7.72 Excl. 23% VAT)

in stock

E3D V6 direct hot end, 3mm

Zoom in

Description This kit contains only the metal hot end parts and is intended for users with some experience and/or in possession of their own parts. Electronics components are not included. The kit is ideal for upgrading your 3D printer to an E3D V6 hot end.

The kit contains the following parts:

E3D V6 aluminium heatsink 3.00mm;
E3D V6 aluminium heater block;
E3D V6 heat break 3mm;
E3D V6 brass nozzle 3mm x 0.4mm;
E3D V6 spare fasteners.

Specifications

Hazard class:	N/A	Our item no:	DED00026
Brand:	E3D	Tunnel code:	N/A
Filament diameter:	3 mm	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

E3D Lite V6 Heatsink, 1.75mm

Zoom in

Description This original Lite V6 heatsink from E3D can be used in combination with the V6 hotend and comes without PTFE tube. Suitable for 1.7mm filament. This heatsink can be used in a Bowden or a direct drive setup.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DED00249

€15.00 (Incl. 23% VAT)
(€12.20 Excl. 23% VAT)

5-7 day delivery

Heaterblock insulation cotton

Zoom in

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hot end more stable, which in turn results in better prints.

Specifications

Hazard class:	N/A	Thickness:	3 mm
Brand:	123-3D	Tunnel code:	N/A
Dimensions:	75 x 21 mm	Packing group:	NO
Our item no:	DVB00017	Is liquid:	no

Order now, we can ship this today!

€1.35 (Incl. 23% VAT)
(€1.10 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Bowden Parts

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Bowden Parts