Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

E3D brass Volcano nozzle, 2.8mm x 0.4mm VOLCANO-NOZZLE-300-0400 DED00048

Description This E3D volcano nozzle has an opening of 0.4mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DED00048
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.4 mm

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

Delivery in New Year

E3D brass Volcano nozzle, 2.85mm x 0.8mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.8mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DED00038
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.8 mm

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

Delivery in New Year

E3D brass Volcano nozzle, 2.85mm x 1mm

Zoom in

Description This E3D volcano nozzle has a 1mm opening, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DED00039
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	1 mm

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

Delivery in New Year

E3D brass Volcano nozzle, 2.85mm x 1.2mm

Zoom in

Description This E3D volcano nozzle has an opening of 1.2mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DED00040
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	1.2 mm

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

Delivery in New Year

E3D Volcano hardened steel nozzle 2.85 x 0.8mm

Zoom in

Description The hardened steel E3D Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.8mm.

Specifications

Hazard class:	N/A	Our item no:	DED00221
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.8 mm

This product is end of life.

E3D Volcano hardened steel nozzle 2.85 x 1mm

Zoom in

Description The hardened steel E3D Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 1mm.

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	2.85 mm	Our item no:	DED00223
Material:	steel	Screwthread type:	M6
Nozzle coating:	none

This product is end of life.

E3D Volcano hardened steel nozzle, 2.85mm x 0.40mm

Zoom in

Description The replacement V6 nozzle for Volcano E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for highly specialised materials, where a standard brass nozzle runs the risk of corroding. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm and is suitable for filament with a diameter of 2.85mm.

Specifications

Hazard class:	N/A	Our item no:	DED00066
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.4 mm

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

Delivery in New Year

E3D Volcano hardened steel nozzle, 2.85mm x 0.60mm

Zoom in

Description This replacement V6 nozzle for the Volcano E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.6mm and is suitable for filament with a diameter of 0.6mm

Specifications

Hazard class:	N/A	Our item no:	DED00067
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.6 mm

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

Delivery in New Year

E3D Volcano hardened steel nozzle, 2.85mm x 1.20mm

Zoom in

Description This replacement V6 nozzle for the Volcano E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 1.2mm and is suitable for filament with a diameter of 2.85mm

Specifications

Hazard class:	N/A	Our item no:	DED00068
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	steel	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	1.2 mm

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

Delivery in New Year

E3D Volcano copper nozzle, 2.85mm x 0.40mm

Zoom in

Description This E3D Volcano nozzle has an opening of 0.4mm and is ideal for printing tall layers with 1.75mm filament. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DED00128
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.4 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

Delivery in New Year

E3D Volcano copper nozzle, 2.85mm x 0.60mm

Zoom in

Description This E3D Volcano nozzle has an opening of 0.6mm and is ideal for printing tall layers with 2.85mm filament. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	2.85 mm	Our item no:	DED00129
Material:	copper	Screwthread type:	M6
Nozzle coating:	nickel plated

This product is end of life.

E3D Volcano copper nozzle, 2.85mm x 0.80mm

Zoom in

Description This E3D Volcano nozzle has an opening of 0.8mm and is ideal for printing tall layers with 2.85mm filament. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DED00130
Brand:	E3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.8 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

Delivery in New Year

E3D Volcano silicone sock (3-pack)

Zoom in

Description Give your hot end an upgrade with this Volcano silicone sock for E3D or other volcano style hot ends.

Prevent heat loss and prevent filament residues from sticking to your heater block with this heat-resistant silicone sock. In addition, the temperature is more stable, so you can also print 'bridges' or 'overhangs' of a higher quality. After attaching the sock, it adapts to the heater block. Suitable for nozzles with a diameter of 0.4 mm to 1.2 mm.

The sock has a lifespan of 100+ hours and is in a pack of 3.

Specifications

Hazard class:	N/A	Our item no:	DED00244
Brand:	E3D	Tunnel code:	N/A
Colour:	orange	Packing group:	NO
Material:	silicon	Is liquid:	no

Order now, we can ship this today!

€10.00 (Incl. 23% VAT)
(€8.13 Excl. 23% VAT)

in stock

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85 x 0.40mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.4mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Hazard class:	N/A	Our item no:	DMS00072
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.4 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

Delivery in New Year

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.6mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.6mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Hazard class:	N/A	Our item no:	DMS00073
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.6 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

Delivery in New Year

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.8mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.8mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Hazard class:	N/A	Our item no:	DMS00074
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.8 mm

Order now, we can ship this today!

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

in stock

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 1mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 1mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Hazard class:	N/A	Our item no:	DMS00075
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	1 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

Delivery in New Year

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.25mm

Zoom in

Description The Micro Swiss Brass Volcano nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.25mm.

Compatible with the following printers and parts:

Printers with an E3D Volcano hotend (2.85mm filament)
Artillery Sidewinder X1

Specifications

Hazard class:	N/A	Our item no:	DMS00107
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.25 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

Delivery in New Year

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00946
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.4 mm

Order now, we can ship this today!

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

in stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00947
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.6 mm

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

Delivery in New Year

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00948
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.8 mm

Order now, we can ship this today!

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

in stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00949
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	1 mm

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

Delivery in New Year

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack)

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Quantity:	4
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Our item no:	DAR00959

€193.00 (Incl. 23% VAT)
(€156.91 Excl. 23% VAT)

Delivery in New Year

Oscar3D ECO Volcano ruby nozzle, 2.85mm x 0.40mm

Zoom in

Description The Oscar3D ECO Volcano red ruby nozzle is ideal for robust and stable printing results. Thanks to the wide, flat tip, a perfectly smooth surface is achieved. The built-in ruby, one of the sturdiest materials in the world, ensures that the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.4mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DOS00015
Brand:	Oscar 3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	ruby brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.4 mm

€93.00 (Incl. 23% VAT)
(€75.61 Excl. 23% VAT)

Delivery in New Year

Oscar3D ECO Volcano ruby nozzle, 2.85mm x 0.60mm

Zoom in

Description The Oscar3D ECO Volcano red ruby nozzle is ideal for robust and stable printing results. Thanks to the wide, flat tip, a perfectly smooth surface is achieved. The built-in ruby, one of the sturdiest materials in the world, ensures that the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.6mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DOS00016
Brand:	Oscar 3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	ruby brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.6 mm

€93.00 (Incl. 23% VAT)
(€75.61 Excl. 23% VAT)

Delivery in New Year

Oscar3D ECO Volcano ruby nozzle | L | 2.85mm x 0.80mm

Zoom in

Description The Oscar3D ECO Volcano red ruby nozzle is ideal for robust and stable printing results. Thanks to the wide, flat tip, a perfectly smooth surface is achieved. The built-in ruby, one of the sturdiest materials in the world, ensures that the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.8mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DOS00017
Brand:	Oscar 3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	ruby brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.8 mm

€93.00 (Incl. 23% VAT)
(€75.61 Excl. 23% VAT)

Delivery in New Year

Oscar3D VARIO Volcano ruby nozzle, 2.85mm x 0.40mm

Zoom in

Description The Oscar3D VARIO Volcano red ruby nozzle has a very fine point, which makes this nozzle extremely suitable for the finest print details. Thanks to the built-in ruby, one of the sturdiest materials in the world, the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.4mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DOS00021
Brand:	Oscar 3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	ruby brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.4 mm

€93.00 (Incl. 23% VAT)
(€75.61 Excl. 23% VAT)

Delivery in New Year

Oscar3D VARIO Volcano ruby nozzle, 2.85mm x 0.60mm

Zoom in

Description The Oscar3D VARIO Volcano red ruby nozzle has a very fine point, which makes this nozzle extremely suitable for the finest print details. Thanks to the built-in ruby, one of the sturdiest materials in the world, the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.6mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DOS00022
Brand:	Oscar 3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	ruby brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.6 mm

€93.00 (Incl. 23% VAT)
(€75.61 Excl. 23% VAT)

Delivery in New Year

Oscar3D VARIO Volcano ruby nozzle, 2.85mm x 0.80mm

Zoom in

Description The Oscar3D VARIO Volcano red ruby nozzle has a very fine point, which makes this nozzle extremely suitable for the finest print details. Thanks to the built-in ruby, one of the sturdiest materials in the world, the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.8mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Hazard class:	N/A	Our item no:	DOS00023
Brand:	Oscar 3D	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	ruby brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.8 mm

€93.00 (Incl. 23% VAT)
(€75.61 Excl. 23% VAT)

Delivery in New Year

E3D nozzle wrench, 7mm

Zoom in

Description Use this wrench to carefully attach your E3D nozzle.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DED00053

Order now, we can ship this today!

€2.75 (Incl. 23% VAT)
(€2.24 Excl. 23% VAT)

in stock

Baco adjustable spanner, 200mm

Zoom in

Description You can use this adjustable spanner to loosen and tighten your nozzle and prevent too much force from being exerted on the heatbreak of your hot end. The key has a length of 20cm and is equipped with an ergonomic handle.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Dimensions:	20 cm	Is liquid:	no
Our item no:	DGS00060

Order now, we can ship this today!

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

in stock

E3D V6 silicone sock pro for hot ends (3-pack)

Zoom in

Description With these silicone socks you can ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, more favorable for overhangs, bridges and more accurate temperature behavior.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	E3D	Packing group:	NO
Colour:	blue	Is liquid:	no
Our item no:	DED00072

Order now, we can ship this today!

€6.00 (Incl. 23% VAT)
(€4.88 Excl. 23% VAT)

in stock

Hot end copper cleaning brush

Zoom in

Description This cleaning brush has copper bristles and is ideal for cleaning the hot end of your 3D printer.

CAUTION: To avoid short circuits, turn off your 3D printer completely before use.

Specifications

Hazard class:	N/A	Our item no:	DGS00072
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Length:	170 mm	Is liquid:	no
Material:	copper	Width:	12 mm

Order now, we can ship this today!

€3.95 (Incl. 23% VAT)
(€3.21 Excl. 23% VAT)

in stock

Metal needle, 0.15mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.15mm and is suitable for a nozzle of 0.15mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.15 mm	Packing group:	NO
Our item no:	DGS00091	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle, 0.20mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.20mm and is suitable for a nozzle of 0.20mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.2 mm	Packing group:	NO
Our item no:	DGS00092	Is liquid:	no

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

Delivery in New Year

Metal needle, 0.25mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.25mm and is suitable for a nozzle of 0.25mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.25 mm	Packing group:	NO
Our item no:	DGS00093	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle, 0.30mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.30mm and is suitable for a nozzle of 0.30mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.3 mm	Packing group:	NO
Our item no:	DGS00094	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle, 0.35mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.35mm and is suitable for a nozzle of 0.35mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.35 mm	Packing group:	NO
Our item no:	DGS00095	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle, 0.40mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.40mm and is suitable for a nozzle of 0.40mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.4 mm	Packing group:	NO
Our item no:	DGS00096	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle 0.50mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.50mm and is suitable for a nozzle of 0.50mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.5 mm	Packing group:	NO
Our item no:	DGS00097	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle 0.60mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.60mm and is suitable for a nozzle of 0.60mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.6 mm	Packing group:	NO
Our item no:	DGS00098	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle 0.80mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.80mm and is suitable for a nozzle of 0.80mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.8 mm	Packing group:	NO
Our item no:	DGS00099	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle 1.00mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 1mm and is suitable for a nozzle of 1mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	1 mm	Packing group:	NO
Our item no:	DGS00100	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Ratchet with caps 1/4' nozzle tool

Zoom in

Description This ratchet with different caps is ideal for replacing the nozzle of your 3D printer.

The ratchet has 72 teeth for fine adjustment, comes with a 100mm extension and contains 10 sockets measuring 4, 6, 7, 8, 9, 10, 11, 12 and 13mm.

PLEASE NOTE: When loosening and tightening your nozzle, always use a counter wrench on the heater block, for example, so that the forces do not act on the heatbreak.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Our item no:	DGS00059	Is liquid:	no

Order now, we can ship this today!

€18.50 (Incl. 23% VAT)
(€15.04 Excl. 23% VAT)

in stock

Solid carbide drill bits, 0.1mm-1mm

Zoom in

Description This 10-piece solid carbide drill set is ideal for precision jobs!

Use this set to drill tiny holes (with a diameter of 0.1mm to 1mm) in various materials such as copper, brass, wood, printed circuit boards and many plastics. In addition, you can also use the drills to unclog the nozzle of your printer head/extruder.

The drill bits have a pitch of 0.1mm and a shank diameter of 3.175mm.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DGS00047

Order now, we can ship this today!

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

3mm

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

3mm