Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.25mm

Description The Micro Swiss Brass Volcano nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.25mm.

Compatible with the following printers:

Printers with an E3D Volcano hotend (1.75mm filament)
Artillery Sidewinder X1

Specifications

Hazard class:	N/A	Our item no:	DMS00106
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.25 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.4mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:
	●	Printers with an E3D Volcano hot end (1.75mm filament)
	●	Artillery Sidewinder X1

Specifications

Hazard class:	N/A	Our item no:	DMS00068
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.4 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.60mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:
	●	Printers with an E3D Volcano hot end (1.75mm filament)
	●	Artillery Sidewinder X1

Specifications

Hazard class:	N/A	Our item no:	DMS00069
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.6 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.80mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers:
	●	Printers with an E3D Volcano hot end (1.75mm filament)
	●	Artillery Sidewinder X1

Specifications

Hazard class:	N/A	Our item no:	DMS00070
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.8 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 1mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.00mm.

Compatible with the following printers:
	●	Printers with an E3D Volcano hot end (1.75mm filament)
	●	Artillery Sidewinder X1

Specifications

Hazard class:	N/A	Our item no:	DMS00071
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	1 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.25mm

Zoom in

Description The Micro Swiss Brass Volcano nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.25mm.

Compatible with the following printers and parts:

Printers with an E3D Volcano hotend (2.85mm filament)
Artillery Sidewinder X1

Specifications

Hazard class:	N/A	Our item no:	DMS00107
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.25 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85 x 0.40mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.4mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Hazard class:	N/A	Our item no:	DMS00072
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.4 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.6mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.6mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Hazard class:	N/A	Our item no:	DMS00073
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.6 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.8mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.8mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Hazard class:	N/A	Our item no:	DMS00074
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.8 mm

Order now, we can ship this today!

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

in stock

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 1mm

Zoom in

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 1mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Hazard class:	N/A	Our item no:	DMS00075
Brand:	Micro Swiss	Screwthread type:	M6
Filament diameter:	2.85 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	1 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Baco adjustable spanner, 200mm

Zoom in

Description You can use this adjustable spanner to loosen and tighten your nozzle and prevent too much force from being exerted on the heatbreak of your hot end. The key has a length of 20cm and is equipped with an ergonomic handle.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Dimensions:	20 cm	Is liquid:	no
Our item no:	DGS00060

Order now, we can ship this today!

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

in stock

Hot end copper cleaning brush

Zoom in

Description This cleaning brush has copper bristles and is ideal for cleaning the hot end of your 3D printer.

CAUTION: To avoid short circuits, turn off your 3D printer completely before use.

Specifications

Hazard class:	N/A	Our item no:	DGS00072
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Length:	170 mm	Is liquid:	no
Material:	copper	Width:	12 mm

Order now, we can ship this today!

€3.95 (Incl. 23% VAT)
(€3.21 Excl. 23% VAT)

in stock

Metal needle, 0.15mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.15mm and is suitable for a nozzle of 0.15mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.15 mm	Packing group:	NO
Our item no:	DGS00091	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle, 0.20mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.20mm and is suitable for a nozzle of 0.20mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.2 mm	Packing group:	NO
Our item no:	DGS00092	Is liquid:	no

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

5-7 day delivery

Metal needle, 0.25mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.25mm and is suitable for a nozzle of 0.25mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.25 mm	Packing group:	NO
Our item no:	DGS00093	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle, 0.30mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.30mm and is suitable for a nozzle of 0.30mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.3 mm	Packing group:	NO
Our item no:	DGS00094	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle, 0.35mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.35mm and is suitable for a nozzle of 0.35mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.35 mm	Packing group:	NO
Our item no:	DGS00095	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle, 0.40mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.40mm and is suitable for a nozzle of 0.40mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.4 mm	Packing group:	NO
Our item no:	DGS00096	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle 0.50mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.50mm and is suitable for a nozzle of 0.50mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.5 mm	Packing group:	NO
Our item no:	DGS00097	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle 0.60mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.60mm and is suitable for a nozzle of 0.60mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.6 mm	Packing group:	NO
Our item no:	DGS00098	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle 0.80mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.80mm and is suitable for a nozzle of 0.80mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	0.8 mm	Packing group:	NO
Our item no:	DGS00099	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Metal needle 1.00mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 1mm and is suitable for a nozzle of 1mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Hazard class:	N/A	Quantity per package:	5
Brand:	123-3D	Tunnel code:	N/A
Diameter:	1 mm	Packing group:	NO
Our item no:	DGS00100	Is liquid:	no

Order now, we can ship this today!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

Ratchet with caps 1/4' nozzle tool

Zoom in

Description This ratchet with different caps is ideal for replacing the nozzle of your 3D printer.

The ratchet has 72 teeth for fine adjustment, comes with a 100mm extension and contains 10 sockets measuring 4, 6, 7, 8, 9, 10, 11, 12 and 13mm.

PLEASE NOTE: When loosening and tightening your nozzle, always use a counter wrench on the heater block, for example, so that the forces do not act on the heatbreak.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Our item no:	DGS00059	Is liquid:	no

Order now, we can ship this today!

€18.50 (Incl. 23% VAT)
(€15.04 Excl. 23% VAT)

in stock

Solid carbide drill bits, 0.1mm-1mm

Zoom in

Description This 10-piece solid carbide drill set is ideal for precision jobs!

Use this set to drill tiny holes (with a diameter of 0.1mm to 1mm) in various materials such as copper, brass, wood, printed circuit boards and many plastics. In addition, you can also use the drills to unclog the nozzle of your printer head/extruder.

The drill bits have a pitch of 0.1mm and a shank diameter of 3.175mm.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Material:	steel	Is liquid:	no
Our item no:	DGS00047

Order now, we can ship this today!

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Volcano compatible nozzles

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Volcano compatible nozzles