Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

DRV8825 stepstick driver with heat sink (4-pack)

Description Order a 4-pack of DRV8825 stepsticks with 4x heat sinks.

Specifications

Hazard class:	N/A	Operating volt vmot:	-
Brand:	123-3D	Our item no:	DSD00010
Chip:	DRV8825	Tunnel code:	N/A
Length:	20.4 mm	Packing group:	NO
Max current:	2.5 A	Is liquid:	no
Operating volt logic:	3.5 - 25V	Width:	15.6 mm

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€25.50 (coming soon) (Incl. 23% VAT)
(€20.73 Excl. 23% VAT)

BigTreeTech TMC5160 Pro V1.1 Driver (4-pack)

Zoom in

Description With the BigTreeTech TMC5160 Pro V1.1 control module for stepper motors you have the option to control stepper motors with extra torque. The module is Pololu compatible and fits most electronic boards for 3D printers. For best performance, you can configure the module via SPI to get the most out of your motor. The TMC5160 Pro V1.1 is suitable for use up to 56V, so it can easily be connected to a 48V power supply. With sufficient cooling, you can generate up to 3A of current for the fastest movements. Finally, the module ensures virtually silent movements thanks to the 1/256 step interpolation.

Specifications

Hazard class:	N/A	Our item no:	DAR00985
Brand:	BIGTREETECH	Quantity:	4
Chip:	TMC5160	Tunnel code:	N/A
Max current:	3 A	Packing group:	NO
Max voltage VDC:	56	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€107.50 (coming soon) (Incl. 23% VAT)
(€87.40 Excl. 23% VAT)

Stepstick DRV8825 Stepper Motor Driver (123-3D version)

Zoom in

Description The Stepstick DRV8825 is a powerful stepper motor driver and can deliver no less than 2.5A (if properly cooled). It is compatible with Megatronics and the ideal stepper motor driver for current 3D printers.

The Stepstick DRV8825 has the following features:

Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step and 1/32-step
Protected against too high temperatures
Protected against undervoltages
Protected against too high currents
Supports different decay modes
Simple step control interface

Cooling block included (including adhesive layer).

Additional information: data sheet (PDF)

Specifications

Hazard class:	N/A	Operating volt vmot:	-
Brand:	123-3D	Our item no:	DSD00002
Chip:	DRV8825	Tunnel code:	N/A
Length:	20.4 mm	Packing group:	NO
Max current:	2.5 A	Is liquid:	no
Operating volt logic:	3.5 - 25V	Width:	15.6 mm

Order now, we can ship this today!

€6.95 (Incl. 23% VAT)
(€5.65 Excl. 23% VAT)

in stock

TMC2100 Stepper Driver | 1/256 step interpolation

Zoom in

Description The TMC2100 is an advanced stepper motor driver with interpolation functionality. For example, it is possible to have 1/256 microsteps on the output with a 1/16 microstep control. This makes the TMC2100 an incredibly quiet driver, so no heavy CPU is needed.

This stepper motor driver comes with a cooling block.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Chip:	TMC2100	Is liquid:	no
Our item no:	DSD00009

Order now, we can ship this today!

€18.00 (Incl. 23% VAT)
(€14.63 Excl. 23% VAT)

in stock

TMC2130 Stepper Driver | 1/256 step interpolation

Zoom in

Description The TMC2130 is an advanced step driver with interpolation functionality. For example, it is possible to have 1/256 microsteps on the output with a 1/16 microstep control. This makes the TMC2130 an incredibly quiet driver, so no heavy CPU is needed.

This step driver has the SPI connection at the top and comes with a separate cooling block.

Specifications

Hazard class:	N/A	Min voltage:	5 v/°c
Brand:	123-3D	Our item no:	DSD00013
Chip:	TMC2130	Tunnel code:	N/A
Max current:	2.5 A	Packing group:	NO
Max voltage VDC:	38	Is liquid:	no

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

TMC2130 Stepper Driver | 1/256 step interpolation v1.1

Zoom in

Description The TMC2130 V1.1 is a quiet, powerful stepper driver with the SPI pins soldered up for top access. The driver supports up to 1/256-step and features StealthChop technology silent stepper motors. It also contains built-in protection for overtemperature or short circuit. The current limit can be set with the potentiometer.

The TMC2130 V1.1 comes with a cooling block, 20cm female-female dupont/jumper cables (4 wires) and a small screwdriver.

Specifications

Hazard class:	N/A	Min voltage:	5.5 v/°c
Brand:	123-3D	Our item no:	DSD00015
Chip:	TMC2130	Tunnel code:	N/A
Max current:	2.5 A	Packing group:	NO
Max voltage VDC:	46	Is liquid:	no

€15.25 (Incl. 23% VAT)
(€12.40 Excl. 23% VAT)

5-7 day delivery

BigTreeTech TMC5160 Pro V1.1 Driver

Zoom in

Description With the BigTreeTech TMC5160 Pro V1.1 control module for stepper motors you have the option to control stepper motors with extra torque. The module is Pololu compatible and fits most electronic boards for 3D printers. For best performance, you can configure the module via SPI to get the most out of your motor. The TMC5160 Pro V1.1 is suitable for use up to 56V, so it can easily be connected to a 48V power supply. With sufficient cooling, you can generate up to 3A of current for the fastest movements. Finally, the module ensures virtually silent movements thanks to the 1/256 step interpolation.

Specifications

Hazard class:	N/A	Our item no:	DAR00924
Brand:	BIGTREETECH	Tunnel code:	N/A
Chip:	TMC5160	Packing group:	NO
Max current:	3 A	Is liquid:	no
Max voltage VDC:	56

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

TB6600 Step Driver | 3.5A | 1/32 microsteps | 9V - 40V

Zoom in

Description This powerful 3.5A TB6600 external stepper motor driver can be controlled with 5V electronics and is equipped with 6 dip-switches. This makes it easy to adjust the various microsteps and power settings.

Specifications

Hazard class:	N/A	Min voltage:	9 v/°c
Brand:	123-3D	Our item no:	DSD00012
Chip:	TB6600	Tunnel code:	N/A
Max current:	3.5 A	Packing group:	NO
Max voltage VDC:	40	Is liquid:	no

Order now, we can ship this today!

€26.50 (Incl. 23% VAT)
(€21.54 Excl. 23% VAT)

in stock

SL2690A Step Driver | 6.5A | 1/128 microsteps | 20V - 90V

Zoom in

Description The SL2690A is a powerful stepper motor driver with a maximum current of 6.5A.

All settings are made by means of the DIP switches. The current is adjustable from 2.8A to 6.5A and the driver has the option of 25600 microsteps.

NOTE: The SL269 driver is especially suitable for the advanced user.

Manual (PDF)

Specifications

Hazard class:	N/A	Our item no:	DSD00008
Brand:	123-3D	Tunnel code:	N/A
Current rating:	6.5 A	Packing group:	NO
Input voltage:	20-90V	Is liquid:	no

Order now, we can ship this today!

€63.50 (Incl. 23% VAT)
(€51.63 Excl. 23% VAT)

in stock

BigTreeTech S42B closed loop drive control board

Zoom in

Description Upgrade your Ender-3 with this closed loop drive control board from BigTreeTech.

The S42B v2.0 is easy to use and significantly improves the performance of your Ender-3. Thanks to the S42B stepper motor driver and the closed loop control board you can now print even quieter, more accurately and more efficiently, even at higher speeds! In addition, the board is equipped with a high-quality OLED screen, so that you do not need a computer for operation.

The packaging consists of:

1x BigTreeTech S42B v2.0
1x OLED display
2x Connection cables
1x Sprocket (for heated bed)
1x Main board adapter
Various screws and parts

Fits the Ender-3, Bigtreetech SKR v1.3, SKR v1.4 (Turbo) and more!

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	BIGTREETECH	Packing group:	NO
Our item no:	DAR00615	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

TMC2130 Stepper Driver | 1/256 step interpolation v 3.0

Zoom in

Description The TMC2130 v3.0 is a two-phase stepper driver with a standard SPI interface and a step/dir interface. Because the driver is equipped with interpolation functionality, it is possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2130 v3.0 an incredibly quiet driver, so that no heavy CPU is required. The stepper driver also offers power control, for energy savings of up to 75%.

Specifications

Hazard class:	N/A	Operating volt logic:	-
Brand:	BIGTREETECH	Our item no:	DAR00797
Chip:	TMC2130	Tunnel code:	N/A
Input voltage:	12-24V	Packing group:	NO
Max current:	2 A	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€19.50 (coming soon) (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

TMC2208 Stepper Driver | 1/256 step interpolation v 3.0

Zoom in

Description The TMC2208 v3.0 is a single-axis stepper motor drive chip, equipped with interpolation functionality. This makes it possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2130 v3.0 an incredibly quiet driver, so that no heavy CPU is required. The stepper driver also offers power control, for energy savings of up to 70%.

Specifications

Hazard class:	N/A	Operating volt logic:	-
Brand:	BIGTREETECH	Our item no:	DAR00794
Chip:	TMC2208	Tunnel code:	N/A
Input voltage:	4.75V-36VDC	Packing group:	NO
Max current:	2 A	Is liquid:	no

€9.95 (Incl. 23% VAT)
(€8.09 Excl. 23% VAT)

5-7 day delivery

TMC2209 Stepper Driver | 1/256 step interpolation v 1.2

Zoom in

Description The TMC2209 stepper driver is a powerful stepper motor driver, equipped with interpolation functionality. This makes it possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2209 v1.2 an incredibly quiet driver, so that no heavy CPU is required.

Specifications

Hazard class:	N/A	Operating volt logic:	-
Brand:	BIGTREETECH	Our item no:	DAR00795
Chip:	TMC2209	Tunnel code:	N/A
Input voltage:	5.5V-28V	Packing group:	NO
Max current:	2 A	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

TMC2225 Stepper Driver | 1/256 step interpolation v 1.0

Zoom in

Description The TMC2225 stepper driver is a powerful stepper motor driver, equipped with interpolation functionality. This makes it possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2225 v1.0 an incredibly quiet driver, so that no heavy CPU is required.

Specifications

Hazard class:	N/A	Operating volt logic:	-
Brand:	BIGTREETECH	Our item no:	DAR00796
Chip:	TMC2225	Tunnel code:	N/A
Input voltage:	4.75V-36VDC	Packing group:	NO
Max current:	2 A	Is liquid:	no

€15.25 (Incl. 23% VAT)
(€12.40 Excl. 23% VAT)

5-7 day delivery

BIGTREETECH EZ2209 Step Driver

Zoom in

Description The EZ2209 from BigTreeTech's EZ series has the more modern TMC2209 on board, which does support StallGuard compared to the TMC2208. Thanks to the 1/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronic boards. The parameters of the TMC2208 chip can be further optimized through a UART link to your microprocessor. With this module you can supply up to 2A current and works on 12 to 24 Volt.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ-drivers.

Specifications

Hazard class:	N/A	Our item no:	DAR01029
Brand:	BIGTREETECH	Tunnel code:	N/A
Chip:	TMC2209	Packing group:	NO
Input voltage:	12-24V	Is liquid:	no
Max current:	2 A

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€7.90 (coming soon) (Incl. 23% VAT)
(€6.42 Excl. 23% VAT)

BIGTREETECH EZ5160 Pro V1.0 Stepper Driver

Zoom in

Description With the BigTreeTech EZ5160 you get the most powerful module of the series for optimal 3D printing performance. The TMC5160 is powerful, quiet and accepts up to 48V for fast print movements. With 2.5A maximum current and StallGuard you are assured of the highest reliability and precision. To achieve ultimate performance, you can adjust many settings via the SPI link.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ-drivers.

Specifications

Hazard class:	N/A	Our item no:	DAR01030
Brand:	BIGTREETECH	Tunnel code:	N/A
Chip:	TMC5160	Packing group:	NO
Current rating:	2.5 A	Is liquid:	no
Input voltage:	8V-48V

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€20.25 (coming soon) (Incl. 23% VAT)
(€16.46 Excl. 23% VAT)

BIGTREETECH EZ2208 V1.0 Stepper Driver

Zoom in

Description BigTreeTech's EZ2208 EZ Series provides powerful, quiet stepper motor control. Thanks to the 1/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronic boards. The parameters of the TMC2208 chip can be further optimized through a UART link to your microprocessor. With this module you can supply up to 2A of current and it works on 12 to 24 Volt.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ-drivers.

Specifications

Hazard class:	N/A	Our item no:	DAR01031
Brand:	BIGTREETECH	Tunnel code:	N/A
Chip:	TMC2208	Packing group:	NO
Input voltage:	12-24V	Is liquid:	no
Max current:	2 A

€7.90 (Incl. 23% VAT)
(€6.42 Excl. 23% VAT)

5-7 day delivery

BIGTREETECH EZ2130 V1.0 Stepper Driver

Zoom in

Description The BigTreeTech EZ2130 from the EZ series contains the silent TMC2130 stepper motor driver. This powerful chip can supply up to 2A of current and works between 12 and 24 Volt. To achieve optimal performance, the parameters of the control can be adjusted through communication via SPI. The maximum supported microstepping mode is 1/256 for this driver.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ-drivers.

Specifications

Hazard class:	N/A	Operating volt logic:	-
Brand:	BIGTREETECH	Our item no:	DAR01032
Chip:	TMC2130	Tunnel code:	N/A
Input voltage:	12-24V	Packing group:	NO
Max current:	2 A	Is liquid:	no

€12.25 (Incl. 23% VAT)
(€9.96 Excl. 23% VAT)

5-7 day delivery

BIGTREETECH EZ6609 V1.0 Stepper Driver

Zoom in

Description The BigTreeTech EZ6609 has the powerful GC6609 chip on board for optimal performance. Various parameters can be adjusted with the UART link and the driver delivers up to 2A.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ-drivers.

Specifications

Hazard class:	N/A	Max current:	2 A
Brand:	BIGTREETECH	Our item no:	DAR01033
Chip:	GC6609	Tunnel code:	N/A
Current rating:	1.2 A	Packing group:	NO
Input voltage:	12-24V	Is liquid:	no

€7.90 (Incl. 23% VAT)
(€6.42 Excl. 23% VAT)

5-7 day delivery

BIGTREETECH EZ2225 V1.0 Stepper Driver

Zoom in

Description The BigTreeTech EZ2225 has the TMC2225 chip on board for good 3D printing results at a competitive price. The 1/256 step interpolation offers a quiet 3D printing experience and the control can be further optimized via a UART link. We recommend using active cooling to get the most out of this chip.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ-drivers.

Specifications

Hazard class:	N/A	Our item no:	DAR01034
Brand:	BIGTREETECH	Tunnel code:	N/A
Chip:	TMC2225	Packing group:	NO
Input voltage:	12-24V	Is liquid:	no
Max current:	1 A

€9.10 (Incl. 23% VAT)
(€7.40 Excl. 23% VAT)

5-7 day delivery

BIGTREETECH EZ-Driver Connector V1.0

Zoom in

Description Convert any BigTreeTech EZ stepper motor driver board to fit in a Pololu compatible slot. Very useful if you have a board with Pololu-compatible slots, but want to use the compact EZ drivers. BigTreeTech's EZ series offers a variety of powerful stepper motor drivers, but they are not suitable for the 2x8 pin headers found on many 3D printer electronics boards. This module makes it possible to use the EZ drivers anyway! You only have to take into account the extra height of the module compared to the standard stepper motor control boards.

Note: This module comes without a driver, these are sold separately.

Specifications

Hazard class:	N/A	Stepper type:	-
Brand:	BIGTREETECH	Tunnel code:	N/A
Our item no:	DAR01036	Packing group:	NO
Stepper driver slots:	1	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€3.25 (coming soon) (Incl. 23% VAT)
(€2.64 Excl. 23% VAT)

BigTreeTech TMC5160 Pro V1.1 Driver (8-pack)

Zoom in

Description With the BigTreeTech TMC5160 Pro V1.1 control module for stepper motors you have the option to control stepper motors with extra torque. The module is Pololu compatible and fits most electronic boards for 3D printers. For best performance, you can configure the module via SPI to get the most out of your motor. The TMC5160 Pro V1.1 is suitable for use up to 56V, so it can easily be connected to a 48V power supply. With sufficient cooling, you can generate up to 3A of current for the fastest movements. Finally, the module ensures virtually silent movements thanks to the 1/256 step interpolation.

Specifications

Hazard class:	N/A	Our item no:	DAR00986
Brand:	BIGTREETECH	Quantity:	8
Chip:	TMC5160	Tunnel code:	N/A
Max current:	3 A	Packing group:	NO
Max voltage VDC:	56	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€215.50 (coming soon) (Incl. 23% VAT)
(€175.20 Excl. 23% VAT)

Pololu A4988 Stepper Motor Driver

Zoom in

Description The Pololu A4988 stepper motor driver drives a bipolar stepper motor and has a maximum output current of 2.2A when cooled.

Properties:

Simple step control interface
5 Step resolutions: full step, 1/2 step, 1/4 step, 1/8 step, 1/16 step
Adjustable current output for achieving higher step speeds above the rated voltage of the stepper motor
Intelligent control to automatically switch to the correct power decay: fast decay or slow decay
Automatic shutdown in case of too high temperatures or too high currents
Supplied with all surface-mount components, including A4988 driver

The supplied headers still need to be soldered.

Specifications

Hazard class:	N/A	Operating volt vmot:	-
Brand:	123-3D	Our item no:	DSD00001
Chip:	A4988	Tunnel code:	N/A
Length:	20.3 mm	Packing group:	NO
Max current:	2 A	Is liquid:	no
Operating volt logic:	3.5 - 5V	Width:	15.2 mm

Order now, we can ship this today!

€13.25 (Incl. 23% VAT)
(€10.77 Excl. 23% VAT)

in stock

Pololu DRV8825 Stepper Driver

Zoom in

Description This original Pololu DRV8825 stepper driver features adjustable current limiting, overcurrent and overheating protection and 6 microstep resolutions (up to 1/32). The part can deliver up to approximately 1.5A per phase without heat sink or forced airflow. This board comes with 0.1" male header pins. These are not soldered in.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	-	Packing group:	NO
Our item no:	DAR00132	Is liquid:	no

€12.50 (Incl. 23% VAT)
(€10.16 Excl. 23% VAT)

5-7 day delivery

RAPS128 stepper motor driver

Zoom in

Description RAPS128 is a powerful stepping driver with 1/128 microstepping resolution. The driver is delivered with the heatsink pre-installed. The pinout is compatible with the Stepstick and the Pololu drivers. The current and decay are adjustable with a potentiometer.

Controlling with 1/128 microstepping requires a more powerful processor, such as the Arduino Due boards.

Specifications

Hazard class:	N/A	Our item no:	DSD00006
Brand:	123-3D	Tunnel code:	N/A
Chip:	THB6128	Packing group:	NO
Max current:	2.2 A	Is liquid:	no
Max voltage VDC:	25

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Heatsink for Pololu/Stepper Motor Drivers

Zoom in

Description This heatsink can be used for cooling Pololu or Stepstick stepper motor drivers and has a size of 10mm x 10mm x 10mm.

Specifications

Hazard class:	N/A	Our item no:	DSD00004
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	10 x 10 x 10 mm	Is liquid:	no
Material:	aluminium

Order now, we can ship this today!

€1.75 (Incl. 23% VAT)
(€1.42 Excl. 23% VAT)

in stock

Ceramic screwdriver flat, 1.8mm x 0.4mm

Zoom in

Description With this flat ceramic screwdriver you can adjust the step drivers of your 3D printer in no time. The screwdriver is 100% insulated, has an anti-static handle and is fitted with a special ceramic head.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Length :	112 mm	Is liquid:	no
Our item no:	DAR00622

Order now, we can ship this today!

€3.75 (Incl. 23% VAT)
(€3.05 Excl. 23% VAT)

in stock

Wrecklab PrintHat v2

Zoom in

Description Looking for smooth operation of your 3D printer and extra accuracy when printing?

Introducing the Wrecklab PrintHAT 2 – designed to give you the smoothest and best performance possible. This compact and reliable daughterboard for the Raspberry Pi is smarter, faster and better than its predecessor.

With the PrintHAT 2 you can turn the Raspberry Pi into a powerful controller for 3D printers and small CNC machines. The smart system runs complex computational algorithms on Raspberry PI's powerful CPU, leaving only time-critical tasks to the integrated MCU. As a result, you not only print faster, but also quieter and more accurately.

The main features

A powerful 32-bit processor.
5 state-of-the-art TRINAMICS TMC2209 step drivers.
5 x PWM load.
Improved end stop accuracy via stepper phase detection.
9 configurable IOs.
Sensorless homing.
Extremely quiet operation and smooth movement via StealthChop.
3x 12-bit ADC input.

For beginners and experienced users
The improved installation package makes installation a breeze for beginners or users moving from one controller to another. In addition, there are still more than enough options for the requirements of more experienced users.

Support
The daughterboard supports Klipper, OctoPrint and Mainsails and is suitable for 3D printers, CNC machines and other machines powered by a stepper motor.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Wrecklab	Packing group:	NO
Our item no:	DAR00354	Is liquid:	no

€104.50 (Incl. 23% VAT)
(€84.96 Excl. 23% VAT)

5-7 day delivery

External step driver slot v2.0

Zoom in

Description With this external board you can add an extra step driver slot in addition to the on board locks. The PCBs can be easily connected to each other.

The step driver itself is not included, this is only a step driver slot.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Our item no:	DSD00005	Is liquid:	no

€16.75 (Incl. 23% VAT)
(€13.62 Excl. 23% VAT)

5-7 day delivery

Thermal paste, 5g

Zoom in

Description This thermally conductive paste has a very strong adhesive force and is, among other things, very suitable as thermal interface between heatsinks and power LEDs, VGA cards, step drivers, etc. In addition, this paste is resistant to high temperatures.

Specifications

Brand:	123-3D	Thermal conductivity:	1.2 W/MK
Clotting time:	-	Thermal impedance:	-
Evaporation:	0.001% (200 C° / 24h)	Is liquid:	no
Melting capacity:	200°C / 24H	Volume:	5 grams
Our item no:	DSD00003

Order now, we can ship this today!

€5.75 (Incl. 23% VAT)
(€4.67 Excl. 23% VAT)

in stock

Stepstick DS26LV31T Differential Line Driver (v1.0)

Zoom in

Description The 123-3D Stepstick DS26LV31T Differential Line Driver (v1.0) is a reliable stepper motor driver that controls external stepper motors. This driver is easy to use and compatible with RS-422. When you use this Stepstick, the step and dir outputs alternate between -5V and +5V. This significantly reduces the chance of interruptions and ensures reliable performance over long distances. The board is Pololu compatible, so you can easily use it together with Megatronics and Ultratronics.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Chip:	DS26LV31T	Is liquid:	no
Operating volt logic:	-	Voltage:	5 v
Our item no:	DAR00227

€9.50 (Incl. 23% VAT)
(€7.72 Excl. 23% VAT)

5-7 day delivery

GEEETECH A4988 stepping motor driver for Pro B

Zoom in

Description The A4988 stepper motor driver is a driver that can supply up to 2 A when the cooling block is installed. And can be used in the following 5 step resolutions: full-step, half-step, 1/4-step, 1/8-step and 1/16-step.

Cooling block included (including adhesive layer).

Specifications

Hazard class:	N/A	Operating volt vmot:	-
Brand:	123-3D	Our item no:	DAR00689
Chip:	A4988	Tunnel code:	N/A
Max current:	2 A	Packing group:	NO
Operating volt logic:	-	Is liquid:	no

€4.50 (Incl. 23% VAT)
(€3.66 Excl. 23% VAT)

5-7 day delivery

BigTreeTech TMC2209 Stepper Driver | 1/256 step interpolation v1.3 | UART

Zoom in

2
1
0

Description The BigTreeTech TMC2209 Stepper Driver makes skipping steps and jittering a thing of the past. The driver is super quiet and has good heat dissipation. You can choose from 2 modes: STEP/DIR mode and UART mode. In the STEP/DIR mode there are options for 16, 8, 4 or 2 microsteps. For UART mode, you can use both 4th and 5th pin as UART pin. The potentiometer can be adjusted to better suit your project. Turning this meter clockwise reduces the current supplied to the driver. Turning counterclockwise increases the driver's power supply. Be sure to properly mount the driver before using it for heat dissipation. This prevents the driver from working properly.

Please note: Place the driver in the correct orientation on the motherboard. If the driver is installed incorrectly, it may burn out.

Specifications

Hazard class:	N/A	Operating volt logic:	-
Brand:	BIGTREETECH	Our item no:	DAR01449
Chip:	TMC2209	Tunnel code:	N/A
Input voltage:		Packing group:	NO
Max current:	2 A	Is liquid:	no

€10.50 (Incl. 23% VAT)
(€8.54 Excl. 23% VAT)

5-7 day delivery

TL-Smoother including cable

Zoom in

Description With the TL-Smoother you can make your 3D printer even quieter and reduce vibrations.

The smoother is equipped with no less than 8 large diodes that protect your electronics against induction voltages. By using TL-smoother on the X, Y and Z axes of your printer, you get a better print result. The TL-smoother comes with a connection board with 4-pin connectors, so you can easily place the smoother between the stepper motor and the control.

Specifications

Hazard class:	N/A	Our item no:	DSD00014
Brand:	123-3D	Tunnel code:	N/A
Cable length:	19 cm	Packing group:	NO
Dimensions:	9 x 50 x 30 mm	Is liquid:	no

Order now, we can ship this today!

€7.95 (Incl. 23% VAT)
(€6.46 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Stepper motor control

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Stepper motor control