Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Flsun S1 Delta 3D printer FLSUNS1 DKI00218

1
0

Description Pre-Order: This item is expected in mid-October.

The Flsun S1 3D printer is designed to print ultra-high speed at a speed of up to 1200mm/s. The acceleration of 40000mm/s² and the maximum flow rate of 110mm³/s help this printer to achieve this speed. To ensure stable, fast printing, the frame is made entirely of metal. The printer is supported by AI, so you can always print worry-free. Easily make prints from PLA, PETG, ABS and more.

High-quality prints
The printer has a closed-loop motor, with which unparalleled precision can be achieved. To achieve even tighter layer lines, the Flsun S1 is equipped with vibration compensation. The filament dryer box keeps your filament dry, while at the same time monitoring the humidity and quality of the filament. This keeps the filament in optimal condition for high-quality prints.

AI
The Flsun S1 is supported by AI to achieve even better results. The Lidar detection system ensures accurate calibration and precise auto-bed leveling. This way you are always assured of the perfect first layer. The filament detection accurately monitors the status of the filament to prevent blockages. The camera also uses AI to detect in time when something is wrong, making problems such as filament spaghetti a thing of the past. In addition, the camera ensures that you can monitor the print in real time and that timelapses can be made.

Useful functions
The screen automatically goes into sleep mode when it has not been used for a while and the printer automatically turns off when it has not detected any activity for a long time. The air filter ensures that no harmful substances enter the air. The printer uses the trusted Flsun operating system and has a status indicator light, with which the status of the print can be monitored.

Other functionalities
The construction volume is 320mm x 430mm and smart zone heating has been used, so that the entire print bed is not heated immediately. The inner ring has a diameter of 220mm, the outer ring has a diameter of 220mm – 320mm. The maximum temperature of the print bed is 120℃. The dual gear direct drive extruder is ultra lightweight with an 80W ceramic heat element and has a high flow hot end design. The CPAP turbofan has an rpm of 40,000, making the minimum cooldown for one layer just one second.

*Please note that all pre-order delivery dates are subject to change without warning.
You can cancel your order for a refund at any time prior to deliver.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Flsun	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	120 °C
Network:	work ethernet WiFi	Max print depth:	32 cm
Dimensions:	1,030 x 550 x 595 mm	Max print height:	43 cm
Input voltage:	110-240V	Max print volume:	34.582
Nozzle diameter:	0.4 mm	Max print width:	32 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	350 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00218
Camera included:	yes	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	yes	Is liquid:	no
Heated bed included:	yes	Weight:	39 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€1,649.00 (Incl. 23% VAT)
(€1,340.65 Excl. 23% VAT)

5-7 day delivery

Flsun T1 Delta 3D printer

Zoom in

2
1
0

Description The Flsun T1 is an ultra-high speed 3D printer with a maximum speed of no less than 1000mm/s. The acceleration of 30000mm/s² and the maximum flow rate of 90mm³/s help this printer to achieve this speed. The frame is made entirely of metal to ensure stable printing at this speed. This super-fast printer has a powerful stepper motor with unparalleled precision and a CPAP turbofan provides cooling at 30,000 rpm. Easily print PLA, PETG, ABS and more thanks to the closed housing.

Smart assisted system
This printer uses a smart-assisted system, allowing you to make excellent quality prints. For example, the auto-bed levelling and vibration compensation ensure that the layer lines of your project can be printed perfectly. The power loss function makes it possible to resume your print after a power failure, without your print failing or having to start over. The filament detection closely monitors the status of the filament and stops the print if a problem is detected.

Useful functions
The Flsun T1 is equipped with a HEPA and carbon filter, which filters the air as best as possible. In addition, the printer automatically goes into sleep mode when it has not been used for a while and the printer will automatically stop heating once the print is finished. The built-in camera is ideal for monitoring your print in real time or for making timelapses.

Other functionalities
The construction volume is 260mm x 330mm and the maximum bed temperature is 110℃. The dual gear direct drive extruder is ultra-lightweight and has a nozzle that can handle a maximum of 300℃. Finally, this printer works with the familiar Flsun OS.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Flsun	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	110 °C
Network:	work ethernet WiFi	Max print depth:	26 cm
Dimensions:	836 x 436 x 490 mm	Max print height:	33 cm
Input voltage:	110-240V	Max print volume:	17.52
Nozzle diameter:	0.4 mm	Max print width:	26 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00219
Camera included:	yes	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	yes	Is liquid:	no
Heated bed included:	yes	Weight:	16.8 kg

€599.00 (Incl. 23% VAT)
(€486.99 Excl. 23% VAT)

5-7 day delivery

Creality 3D Ender 3 V3 Plus

Zoom in

1
0

Description Bring your creative ideas to life with the Ender 3 V3 Plus 3D printer from Creality. With the large construction volume of 300mm x 300mm x 330mm you can print life-size objects in one go or print several small objects in one go. It is also possible to print up to 600mm/s with the CoreXZ system. You can easily assemble the printer, making it easy to use even for novice users. Thanks to the automatic calibration, your build plate is always perfectly level, without having to put in any extra effort yourself.

Powerful and stable performance
The Ender 3 V3 Plus delivers fantastic performance due to its reliable and robust clog-free extruder. The printer has a simple quick swap tri-metal nozzle, so you can change it easily and quickly. In addition, the 60W hotend heater ensures smooth extrusion at full power. The part cooling fans at the front and back cool the newly printed part quickly and evenly, making dripping and deformation a thing of the past. Thanks to the two powerful motors on the y-axis, the print bed is moved quickly and stably, even when larger and heavier 3D prints are made. The z-axis has 2 supporting beams on the side, making it less vibrating and very accurate. Easily print different materials such as PLA, ABS, PETG, PLA-CF and the flexible TPU (95A).

User friendly
The new metal design is very stable and takes up significantly less space than other printers with the same build volume. This makes this printer a perfect fit for almost any setup. The Ender 3 V3 Plus has two different speed modes, including a silent mode with a noise level of ≤55 decibels. The handy 800px x 480px touchscreen shows you all the information you need, such as a preview of the model and its progress. The flexible, textured build plate ensures that 3D models remain in place during printing and that they can be easily removed afterwards. Finally, you can easily connect the printer to a LAN connection or WiFi.

Specifications

Hazard class:	N/A	Heated bed included:	yes
Brand:	Creality3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	577 x 410 x 445 mm	Max print depth:	30 cm
Input voltage:	100-240V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	27
Nozzle type:	M6H23	Max print width:	30 cm
Power rating:	350 W	No of extruders:	1
Printer bed levelling:	automatic	Printing technique:	TFDM FFF
Printer extruder:	direct	Printer voltage:	24 v/°c
Extruder max temp:	300 °C	Our item no:	DKI00258
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	yes	Weight:	11.5 kg

Order filament

123-3D black PLA filament 1.75mm, 1.1kg €24.50

123-3D BK/GRY/W/R/B PLA filament bundle 1.75mm, 1.1kg from €117.00 €99.45

123-3D BK/W/R/Y/DB PLA filament bundle 1.75mm, 1.1kg from €117.00 €99.45

€519.99 (Incl. 23% VAT)
(€422.76 Excl. 23% VAT)

5-7 day delivery

Elegoo Saturn 4 3D printer

Zoom in

2
1
0

Description Make Accurate Prints with the Elegoo Saturn 4 Resin 3D Printer The Elegoo Saturn 4 resin 3D printer offers a large build volume of 218.88 x 122.88 x 220 mm and a 3.5-inch 12K mono LCD screen with a resolution of 11520 x 5120 and an XY resolution of 19 x 24 µm, ensuring excellent detail. This user-friendly printer is perfect for both beginners and advanced users.

User-Friendly Features The Saturn 4 is ready to use right out of the box. Simply power it on, and with a touch of a button, the printer performs a quick self-check to ensure everything is functioning properly. The automatic leveling feature saves time and effort, while the advanced cooling system ensures optimal layer cooling for better prints. Its classic design includes a quick-release build plate, a draining rack, and a flip-up lid for ease of use.

Mechanical Sensor The built-in mechanical sensor detects various issues and notifies you when resin levels are low or when residue is present, preventing potential damage to the LCD screen. It also verifies successful automatic bed leveling. Additionally, temperature detection halts printing if the temperature gets too high.

Additional Functionalities The Saturn 4 uses a COB light source and collimating Fresnel lens for sharp prints. It also features a PFA release film, a glass screen protector, and a laser-engraved build plate. It is compatible with the Mars Mate air purifier for enhanced printing conditions.

Specifications

Hazard class:	N/A	Printer has USB:	yes
Brand:	ELEGOO	Max print depth:	12.28 cm
UV wavelength:	405 nm	Max print height:	22 cm
Network:	no	Max print volume:	5.911
Dimensions:	54.8 x 32.74 x 32.92 cm	Max print width:	21.88 cm
Input voltage:	100-240V	Printing technique:	SLA DLP
Light source:	UV LCD	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00261
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Wavelength:	405 nm
Heated bed included:	no	Weight:	13.5 kg
Has laser option:	no

Order now, we can ship this today!

€349.50 (Incl. 23% VAT)
(€284.15 Excl. 23% VAT)

in stock

Elegoo Saturn 4 Ultra 3D printer

Zoom in

2
1
0

Description Experience ultra-fast, high-detail 3D printing with the Elegoo Saturn 4 Ultra resin printer. Its 10-inch 12K mono LCD screen boasts an impressive 11520 x 5120 resolution and an XY resolution of 19 x 24 µm, ensuring no detail is lost. The build volume of 218.88 x 122.88 x 220 mm allows for multiple small prints or one large print in a single batch. This plug-and-play printer is ready to use straight out of the box.

AI & Tilt Technology The Saturn 4 Ultra features intelligent AI camera detection that monitors printing in real-time and detects issues, such as deformations and empty build plates. This minimizes resin waste and enhances print quality. The camera also enables time-lapse videos. The tilt technology rapidly tilts the resin barrel, accelerating print speeds up to 150 mm/h.

User-Friendly Design Designed for both beginners and advanced users, the Saturn 4 Ultra offers a quick-release building plate, reliable draining rack, and an upward-opening lid. Automatic bed leveling and smart self-check simplify the printing process. The printer's two modes, 'fast' and 'slow,' ensure optimal speeds for every project. It features an 8G RAM system for fast, stable file transfers and easy multi-printer control.

Mechanical Sensor An intelligent mechanical sensor detects residue and monitors resin levels, ensuring timely refills and proper leveling. For added safety, the printer includes high-temperature protection that sounds an alarm and stops printing if temperatures exceed the set limit. Printing can easily resume after a power failure.

Additional Features The Saturn 4 Ultra uses a COB light source and collimating Fresnel lens for sharp prints. It comes with a PFA release film, a glass screen protector, and a laser-engraved build plate. It is also compatible with the Mars Mate air purifier.

Specifications

Hazard class:	N/A	Printer has USB:	yes
Brand:	ELEGOO	Max print depth:	12.28 cm
UV wavelength:	405 nm	Max print height:	22 cm
Network:	WiFi	Max print volume:	5.911
Dimensions:	54.8 x 32.74 x 32.92 cm	Max print width:	21.88 cm
Input voltage:	100-240V	Printing technique:	SLA DLP
Light source:	UV LCD	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00262
3D print option:	yes	Tunnel code:	N/A
Camera included:	yes	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Wavelength:	405 nm
Heated bed included:	no	Weight:	14.5 kg
Has laser option:	no

€449.50 (Incl. 23% VAT)
(€365.45 Excl. 23% VAT)

5-7 day delivery

Anycubic Kobra 3 Combo 3D Printer Including Ace Pro

Zoom in

Description Bring the most colourful 3D prints to life with the Anycubic Kobra 3 Combo. This 3D printer comes with the Anycubic Ace Pro, which allows you to 3D print with up to 4 colours or types of filament at the same time. The Anycubic Ace Pro will automatically switch between colours or spools, allowing you to also use two spools of the same colour as a backup for each other.

Intelligent
The smart algorithm helps the Anycubic Ace Pro load the right filament within a minute. To prevent the filament from becoming tangled, it is guided through 4 different tubes to the extruder. There is also a constant check to see whether the filament has run out. If this is the case, the screen will provide a real-time reminder, so there is less chance of your print failing. In addition, the algorithm measures the pressure in the nozzle for smooth extrusion, layer by layer. With just the push of a button you can use the vibration compensation. This will make your prints much smoother. The Kobra 3 Combo can also easily resume printing after a power failure or running out of filament.

User friendly
This 3D printer is very easy to set up and is suitable for both beginners and advanced users. Use the automatic bed levelling to always have a perfectly level print bed. You can easily operate the printer with the touchscreen, which you can also rotate 30˚ to 60˚ for extra comfort. The nozzle goes up to 300˚C, making it suitable for many different types of filaments. In addition, it can be replaced easily and without tools. The 32 bit MCU has a silence sensor to reduce noise to a maximum of 50dB. This means you will not be bothered by noise pollution during printing.

Other functionalities
The Kobra 3 has a sturdy frame that is suitable for long-term stable printing, even at high speeds. The stylish design ensures that this printer fits well in almost any interior. With a construction volume of no less than 250mm x 250mm x 260mm and a maximum printing speed of 600mm/s, you can easily make 3D prints of different sizes. The cooling fan spins up to 7,000 rpm, so your 3D models are cooled quickly. The filament can be dried during 3D printing, so it is always in optimal condition for printing. In addition, the filament is also kept dry when you are not printing. Finally, you can easily control your 3D printer via the Anycubic app (Android & iOS)

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Anycubic	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	100 °C
Network:	WiFi	Max print depth:	25 cm
Dimensions:	483 x 505 x 453 mm	Max print height:	26 cm
Input voltage:	100-240V	Max print volume:	16.25
Nozzle diameter:	0.4 mm	Max print width:	25 cm
Power rating:	400 W	No of extruders:	1
Printer bed levelling:	automatic	Printing technique:	TFDM FFF
Printer extruder:	direct	Printer voltage:	24 v/°c
Extruder max temp:	300 °C	Our item no:	DKI00263
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	yes	Weight:	13.8 kg
Heated bed included:	yes

Order now, we can ship this today!

€379.00 (Incl. 23% VAT)
(€308.13 Excl. 23% VAT)

in stock

Bambu Lab A1 3D printer

Zoom in

Description The Bambu Lab A1 3D Printer offers precision and performance, ideal for both hobbyists and professionals. Key features include high-resolution prints up to 50 microns, a stable metal frame, auto bed leveling, a user-friendly 4.3-inch touchscreen, and Wi-Fi connectivity for remote control. It supports various materials such as PLA, ABS, and PETG, with a large 300mm x 300mm x 400mm build volume and a modular design for easy upgrades. Reliable and safe, it includes power outage recovery, a filament run-out sensor, and an enclosed chamber. The Bambu Lab A1 combines quality, versatility, and ease of use to bring your ideas to life with precision and confidence.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Bambu Lab	Printer has USB:	no
Filament diameter:	1.75 mm	Heatbed max temp:	100 °C
Network:	WiFi	Max print depth:	25.6 cm
Dimensions:	430 x 385 x 410 mm	Max print height:	25.6 cm
Input voltage:	100-240V	Max print volume:	16.777
Power rating:	1,300 W	Max print width:	25.6 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Tunnel code:	N/A
Camera included:	yes	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	yes	Weight:	8.3 kg
Heated bed included:	yes

€449.00 (Incl. 23% VAT)
(€365.04 Excl. 23% VAT)

5-7 day delivery

Bambu Lab A1 Combo 3D Printer + AMS Lite

Zoom in

Description The Bambu Lab A1 3D Printer offers precision and performance, ideal for both hobbyists and professionals. Key features include high-resolution prints up to 50 microns, a stable metal frame, auto bed leveling, a user-friendly 4.3-inch touchscreen, and Wi-Fi connectivity for remote control. It supports various materials such as PLA, ABS, and PETG, with a large 300mm x 300mm x 400mm build volume and a modular design for easy upgrades. Reliable and safe, it includes power outage recovery, a filament run-out sensor, and an enclosed chamber. The Bambu Lab A1 combines quality, versatility, and ease of use to bring your ideas to life with precision and confidence.

This Bambu Lab A1 3D printer comes with an AMS Lite.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Bambu Lab	Printer has USB:	no
Filament diameter:	1.75 mm	Heatbed max temp:	100 °C
Network:	WiFi	Max print depth:	25.6 cm
Dimensions:	430 x 385 x 410 mm	Max print height:	25.6 cm
Input voltage:	100-240V	Max print volume:	16.777
Power rating:	1,300 W	Max print width:	25.6 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Tunnel code:	N/A
Camera included:	yes	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	yes	Weight:	10.9 kg
Heated bed included:	yes

Call or email us about our Lowest Price Guarantee!

Order now, we can ship this today!

€485.00 (Incl. 23% VAT)
(€394.31 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this today!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Our item no:	DGS00122	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50 (coming soon) (Incl. 23% VAT)
(€68.70 Excl. 23% VAT)

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	-	Packing group:	NO
Our item no:	DAR00265	Video promo:	Promotion video
Quantity:	4 Quantity	Is liquid:	no

Order now, we can ship this today!

€17.00 (Incl. 23% VAT)
(€13.82 Excl. 23% VAT)

in stock

Calex Smart WiFi smoke detector

Zoom in

Description This smart smoke detector from Calex ensures that you are informed of smoke in your home wherever you are. The powerful 85dB alarm tone warns you when you are at home. Are you gone out? Then you will receive a notification on your Calex app.

The smoke detector is completely wireless and can therefore be placed anywhere. The sensor works on batteries and lasts about 10 years. If the batteries are almost empty, the smoke alarm will let you know in good time. Connection is via 2.4GHz Wi-Fi. In addition, the sensor can be used with Google Assistant and Amazon Alexa.

With the Calex smart app, the smoke detector can also be programmed, and other smart devices can be set to respond when the smoke detector goes off. For example, you can turn off your 3D printer if it is connected to a smart plug.

Download the Calex Smart app
To use the product optimally, install the free Calex Smart app on your phone or tablet (suitable for Apple or Android). Don't want to use the app for a while? You can also operate the smoke detector with the Calex remote control.

Works with: Tuya, Google* and Alexa*
*Voice Assistant is required to use Google or Alexa.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Calex	Packing group:	NO
Colour:	white	Is liquid:	no
Diameter:	110 mm	Weight:	0.23 kg
Dimensions:	57.15 mm	WiFi:	2.4 GHz
Our item no:	LCA00437

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Calex Smart mini indoor camera (1080p)

Zoom in

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Calex	Packing group:	NO
Colour:	white	Is liquid:	no
Dimensions:	110 x 53 x 32 mm	WiFi:	2.4 GHz
Our item no:	LCA00572

€41.50 (Incl. 23% VAT)
(€33.74 Excl. 23% VAT)

5-7 day delivery

WOOX smart indoor camera

Zoom in

Description Use this smart indoor camera from WOOX to keep an eye on your 3D printer, children, pets and belongings and to secure your home. The WOOX camera can be operated via WiFi with your smartphone or tablet.

In addition, the camera provides a clear image in Full HD 1080p resolution that can be viewed live or stored locally (or on a cloud service), and has a built-in microphone and speaker so that you can communicate with people nearby via your device. camera can communicate. It is also equipped with a motion sensor and infrared vision (up to 7 metres).

*A Voice Assistant is required to use Google or Alexa.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Woox	Packing group:	NO
Colour:	white	Is liquid:	no
Height:	116 mm	Voltage:	220 v
Our item no:	LWO00056	WiFi:	2.4 GHz

Works with


Tuya	Google*	Alexa*	Siri

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

New Printers

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

New Printers