Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Flsun S1 Delta 3D printer FLSUNS1 DKI00218

1
0

Description The Flsun S1 3D printer is designed to print ultra-high speed at a speed of up to 1200mm/s. The acceleration of 40000mm/s² and the maximum flow rate of 110mm³/s help this printer to achieve this speed. To ensure stable, fast printing, the frame is made entirely of metal. The printer is supported by AI, so you can always print worry-free. Easily make prints from PLA, PETG, ABS and more.

High-quality prints
The printer has a closed-loop motor, with which unparalleled precision can be achieved. To achieve even tighter layer lines, the Flsun S1 is equipped with vibration compensation. The filament dryer box keeps your filament dry, while at the same time monitoring the humidity and quality of the filament. This keeps the filament in optimal condition for high-quality prints.

AI
The Flsun S1 is supported by AI to achieve even better results. The Lidar detection system ensures accurate calibration and precise auto-bed leveling. This way you are always assured of the perfect first layer. The filament detection accurately monitors the status of the filament to prevent blockages. The camera also uses AI to detect in time when something is wrong, making problems such as filament spaghetti a thing of the past. In addition, the camera ensures that you can monitor the print in real time and that timelapses can be made.

Useful functions
The screen automatically goes into sleep mode when it has not been used for a while and the printer automatically turns off when it has not detected any activity for a long time. The air filter ensures that no harmful substances enter the air. The printer uses the trusted Flsun operating system and has a status indicator light, with which the status of the print can be monitored.

Other functionalities
The construction volume is 320mm x 430mm and smart zone heating has been used, so that the entire print bed is not heated immediately. The inner ring has a diameter of 220mm, the outer ring has a diameter of 220mm – 320mm. The maximum temperature of the print bed is 120℃. The dual gear direct drive extruder is ultra lightweight with an 80W ceramic heat element and has a high flow hot end design. The CPAP turbofan has an rpm of 40,000, making the minimum cooldown for one layer just one second.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Flsun	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	120 °C
Network:	work ethernet WiFi	Max print depth:	32 cm
Dimensions:	1,030 x 550 x 595 mm	Max print height:	43 cm
Input voltage:	110-240V	Max print volume:	34.582
Nozzle diameter:	0.4 mm	Max print width:	32 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	350 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00218
Camera included:	yes	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	yes	Is liquid:	no
Heated bed included:	yes	Weight:	39 kg

€1,649.00 (coming soon) (Incl. 23% VAT)
(€1,340.65 Excl. 23% VAT)

Elegoo Mars 5 4K 3D printer

Zoom in

2
1
0

Description Create amazing 3D prints with the Mars 5 resin 3D printer from Elegoo. This 3D printer has a build volume of 142.43mm x 89.6mm x 150mm and a maximum print speed of 70mm/h. The xy resolution is 35 x 35 µm (4098 x 2560) and the z-axis precision is 0.02mm. The 6.6 inch 4K mono LCD screen uses an advanced COB light source, bringing small details and textures to life. The smart mechanical sensor helps you get even more out of your 3D print. Thanks to the residue detection, damage to the LCD screen is prevented. In addition, the Mars 5 gives a notification when there is a shortage of resin and problems with levelling. This means you can always make high-quality 3D prints.

Convenience first
The Mars 5 makes it even easier for you with the automatic bed levelling. This 3D printer also comes with a simple self-check. The printer checks whether all parts are working properly before it starts 3D printing. In addition, you do not have to worry about overheating, because the 3D printer gives an alarm when overheating and stops printing when the LED temperature exceeds 80˚C. The efficient cooling system ensures that the Mars 5 has a longer lifespan and can continue to perform optimally.

Other functionalities
The quick release design makes it easy to assemble and replace parts. It is also durable and can be used with the Mars Mate air freshener. The Mars 5 comes with an FEP release film and a laser engraved build plate, which ensures that 3D prints adhere well.

Specifications

Brand:	ELEGOO	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	434 x 230 x 230 mm	Max print depth:	8.96 cm
Input voltage:	100-240V	Max print height:	15 cm
Printer bed levelling:	automatic	Max print volume:	1.927
3D print option:	yes	Max print width:	14.343 cm
Camera included:	no	Printing technique:	SLA DLP
Has CNC option:	no	Weight:	8.26 kg

€195.50 (coming soon) (Incl. 23% VAT)
(€158.94 Excl. 23% VAT)

Elegoo Mars 5 Ultra 9K 3D printer

Zoom in

2
1
0

Description Print super-sharp details with the Mars 5 Ultra resin 3D printer from Elegoo. This 3D printer has a build volume of 153.36mm x 77.76mm x 165mm and a maximum print speed of 150mm/h. The 7 inch 9K mono LCD screen has an xy resolution of 18 µm (8520 x 4320) and a z-axis precision of 0.02mm, making all the small details pop out. This allows you to make high-quality or high-speed 3D prints.

User friendly
The Mars 5 Ultra’s convenient automatic features make this 3D printer suitable for users of all levels. With just 1 click, you can start automatic bed levelling or let the printer perform a self-check. This ensures that everything is ready to start 3D printing. When it is time to replace the release film, the printer will notify you. Thanks to the COB (chip-on-board) light source, there is consistent curing and the advanced high-temperature protection ensures that overheating does not occur. When the LED temperature exceeds 80˚C, the smart system will sound an alarm and stop 3D printing.

Convenience first
The AI camera helps detect and alert you to errors so your 3D prints don’t fail. You can also monitor your 3D printing process in real-time and create time-lapse videos. The smart mechanical sensor lets you know when there is residue left behind so you can fix it. You will also be notified when there is a shortage of resin and when there are issues with levelling. You can easily resume printing after a power outage. The laser-engraved build plate ensures that your 3D prints stay in place during printing.

Other functionalities
The quick release design makes it easy to replace parts and clean the printer. The dual gutters allow you to pour resin into the vat from multiple sides, maximising your efficiency. The drain rack prevents resin from spreading into the environment. The Mars 5 Ultra comes with a tempered glass screen protector and an intuitive touchscreen.

Specifications

Brand:	ELEGOO	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	452 x 268 x 260 mm	Max print depth:	7.776 cm
Input voltage:	100-240V	Max print height:	16.5 cm
Printer bed levelling:	automatic	Max print volume:	1.967
3D print option:	yes	Max print width:	15.336 cm
Camera included:	yes	Printing technique:	SLA DLP
Has CNC option:	no	Weight:	10.6 kg

€289.50 (coming soon) (Incl. 23% VAT)
(€235.37 Excl. 23% VAT)

Elegoo Saturn 4 3D printer

Zoom in

2
1
0

Description Make Accurate Prints with the Elegoo Saturn 4 Resin 3D Printer The Elegoo Saturn 4 resin 3D printer offers a large build volume of 218.88 x 122.88 x 220 mm and a 3.5-inch 12K mono LCD screen with a resolution of 11520 x 5120 and an XY resolution of 19 x 24 µm, ensuring excellent detail. This user-friendly printer is perfect for both beginners and advanced users.

User-Friendly Features The Saturn 4 is ready to use right out of the box. Simply power it on, and with a touch of a button, the printer performs a quick self-check to ensure everything is functioning properly. The automatic leveling feature saves time and effort, while the advanced cooling system ensures optimal layer cooling for better prints. Its classic design includes a quick-release build plate, a draining rack, and a flip-up lid for ease of use.

Mechanical Sensor The built-in mechanical sensor detects various issues and notifies you when resin levels are low or when residue is present, preventing potential damage to the LCD screen. It also verifies successful automatic bed leveling. Additionally, temperature detection halts printing if the temperature gets too high.

Additional Functionalities The Saturn 4 uses a COB light source and collimating Fresnel lens for sharp prints. It also features a PFA release film, a glass screen protector, and a laser-engraved build plate. It is compatible with the Mars Mate air purifier for enhanced printing conditions.

Specifications

Hazard class:	N/A	Printer has USB:	yes
Brand:	ELEGOO	Max print depth:	12.28 cm
UV wavelength:	405 nm	Max print height:	22 cm
Network:	no	Max print volume:	5.911
Dimensions:	54.8 x 32.74 x 32.92 cm	Max print width:	21.88 cm
Input voltage:	100-240V	Printing technique:	SLA DLP
Light source:	UV LCD	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00261
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Wavelength:	405 nm
Heated bed included:	no	Weight:	13.5 kg
Has laser option:	no

Order now, we can ship this on Monday!

€349.50 (Incl. 23% VAT)
(€284.15 Excl. 23% VAT)

in stock

Elegoo Saturn 4 Ultra 3D printer

Zoom in

2
1
0

Description Experience ultra-fast, high-detail 3D printing with the Elegoo Saturn 4 Ultra resin printer. Its 10-inch 12K mono LCD screen boasts an impressive 11520 x 5120 resolution and an XY resolution of 19 x 24 µm, ensuring no detail is lost. The build volume of 218.88 x 122.88 x 220 mm allows for multiple small prints or one large print in a single batch. This plug-and-play printer is ready to use straight out of the box.

AI & Tilt Technology The Saturn 4 Ultra features intelligent AI camera detection that monitors printing in real-time and detects issues, such as deformations and empty build plates. This minimizes resin waste and enhances print quality. The camera also enables time-lapse videos. The tilt technology rapidly tilts the resin barrel, accelerating print speeds up to 150 mm/h.

User-Friendly Design Designed for both beginners and advanced users, the Saturn 4 Ultra offers a quick-release building plate, reliable draining rack, and an upward-opening lid. Automatic bed leveling and smart self-check simplify the printing process. The printer's two modes, 'fast' and 'slow,' ensure optimal speeds for every project. It features an 8G RAM system for fast, stable file transfers and easy multi-printer control.

Mechanical Sensor An intelligent mechanical sensor detects residue and monitors resin levels, ensuring timely refills and proper leveling. For added safety, the printer includes high-temperature protection that sounds an alarm and stops printing if temperatures exceed the set limit. Printing can easily resume after a power failure.

Additional Features The Saturn 4 Ultra uses a COB light source and collimating Fresnel lens for sharp prints. It comes with a PFA release film, a glass screen protector, and a laser-engraved build plate. It is also compatible with the Mars Mate air purifier.

Specifications

Hazard class:	N/A	Printer has USB:	yes
Brand:	ELEGOO	Max print depth:	12.28 cm
UV wavelength:	405 nm	Max print height:	22 cm
Network:	WiFi	Max print volume:	5.911
Dimensions:	54.8 x 32.74 x 32.92 cm	Max print width:	21.88 cm
Input voltage:	100-240V	Printing technique:	SLA DLP
Light source:	UV LCD	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00262
3D print option:	yes	Tunnel code:	N/A
Camera included:	yes	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Wavelength:	405 nm
Heated bed included:	no	Weight:	14.5 kg
Has laser option:	no

Order now, we can ship this on Monday!

€449.50 (Incl. 23% VAT)
(€365.45 Excl. 23% VAT)

in stock

Flashforge Adventurer 5M Pro 3D printer

Zoom in

Description Your Flashforge Adventurer 5M Pro 3D printer will be ready to print within 10 minutes. This super fast printer easily achieves a print speed of up to 600mm/s. Most prints can be printed in just a few hours. The double-sided, flexible, steel build plate with PEI coating allows you to easily remove your model after printing. The construction volume is 220mm x 220mm x 220mm.

Convenience first
The automatic bed levelling system can be activated at the touch of a button. This ensures you get the perfect first layer. The 'run-out' alert indicates when the spool of filament is low and pauses the print. The 'power loss recovery' pauses the print in the event of a power failure. Both ensure that the chance of your print failing is greatly reduced.

The printer is equipped with a camera, which allows you to monitor the progress of your print from a distance. It is also possible to set the Adventurer 5M Pro to turn itself off after the print is finished. The printer makes little noise and has a maximum noise level of only 50 dB.

The printer has a 4.3-inch touchscreen with a user-friendly UI, so you can easily control the printer. Connect the printer to the FlashPrint slicing software to prepare your model for printing. With FlashCloud it is also possible to control your printer remotely.

Different materials
The direct extruder and nozzle are easy to detach. The printing temperature can reach up to 280°C. This allows many different materials to be printed, such as PLA, ABS, PETG, PL-CF and PETG-CF. This opens up a world of possibilities for your 3D prints.

A consistent, professional quality
This Flashforge printer delivers professional quality in many areas. For example, it is built with a sturdy, all-metal frame. The air purification system has double air filters for even better filtering, and the print chamber is also actively cooled. Finally, the vibration-canceling technology ensures smooth prints.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Flashforge	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	110 °C
Network:	work ethernet WiFi	Max print depth:	22 cm
Dimensions:	453 x 380 x 400 mm	Max print height:	22 cm
Input voltage:	100-240V	Max print volume:	10.648
Nozzle diameter:	0.4 mm	Max print width:	22 cm
Power rating:	350 W	No of extruders:	1
Printer bed levelling:	automatic	Printing technique:	TFDM FFF
Printer extruder:	direct	Printer voltage:	24 v/°c
Extruder max temp:	280 °C	Our item no:	DKI00211
3D print option:	yes	Tunnel code:	N/A
Camera included:	yes	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	yes	Weight:	14.6 kg
Heated bed included:	yes

€499.50 (coming soon) (Incl. 23% VAT)
(€406.10 Excl. 23% VAT)

Flashforge Adventurer 5M 3D printer

Zoom in

Description The Flashforge Adventurer 5M 3D printer is ideal for bringing your creative ideas to life. The construction volume of 220mm x 220mm x 220mm offers enough space for making larger prints. The print speed can reach up to 600mm/s, meaning your prints will be ready faster. The printed circuit board has a PEI coating on both sides for easy removal of your prints.

Convenience first
The automatic bed leveling system can be activated at the touch of a button. In addition, the printer has vibration compensation to get the perfect first layer. The filament run-out sensor will stop the print before your spool of filament runs out and the 'power loss recovery' allows you to resume the print after a power failure. Both ensure that the chance of your print failing is greatly reduced.

The printer is equipped with a 4.3-inch touchscreen, with which you can control the printer. Connect the printer to the FlashPrint slicing software to prepare your model for printing. With FlashCloud it is also possible to control your printer remotely.

Improved parts
The Adventurer 5M has a new direct drive extruder and fast-heating nozzle. The nozzle can be heated to a maximum temperature of 280°C. This allows you to print different types of filament, even flexible filament, without any problems. You can change the nozzle within 3 seconds using the simple click system. The improved cooling system has a strong fan and double air ducts, which ensure more effective cooling.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Flashforge	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	110 °C
Network:	work ethernet WiFi	Max print depth:	22 cm
Dimensions:	448 x 363 x 376 mm	Max print height:	22 cm
Input voltage:	100-240V	Max print volume:	10.648
Nozzle diameter:	0.4 mm	Max print width:	22 cm
Power rating:	350 W	No of extruders:	1
Printer bed levelling:	automatic	Printing technique:	TFDM FFF
Printer extruder:	direct	Printer voltage:	24 v/°c
Extruder max temp:	280 °C	Our item no:	DKI00210
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	yes	Weight:	10.8 kg
Heated bed included:	yes

€339.00 (coming soon) (Incl. 23% VAT)
(€275.61 Excl. 23% VAT)

Creality 3D Halot Mage Pro CL-103 3D printer

Zoom in

Description The Creality Halot Mage Pro CL-103 is a super fast resin 3D printer that prints no less than 170mm per hour. This printer is equipped with a professional 10.3'' 8K LCD screen and has a construction volume of 228mm x 128mm x 230mm³. The new, smart resin pump automatically controls the supply and discharge of resin. The printer can be filled or emptied within half an hour, so you no longer have to do this manually. The Halot Mage Pro CL-103 has a smart air purifier with a replaceable carbon filter, which reduces the unpleasant smell of printing with resin.

Print anywhere quickly and easily by controlling the printer remotely with the Creality Cloud app (available on IOS and Android). In addition, it is possible to control the printer from the computer or a USB stick and you can connect a USB camera so that you can monitor your print remotely. The Halot Mage Pro CL-103 uses the self-developed Halot OS, which has a clear UI and synchronizes data with your computer, telephone and Creality Cloud. The powerful CPU ensures that you can easily print at a high speed. The evenness of the light ensures consistent quality no matter where on the build plate printing takes place. The light intensity and the speed at which the layers are cured ensure a smooth finish and sharp contours.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Creality3D	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	12.8 cm
Network:	work ethernet WiFi	Max print height:	23 cm
Dimensions:	60.8 x 33.3 x 27 cm	Max print volume:	6.712
Input voltage:	100-240V	Max print width:	22.8 cm
Light source:	UV LCD	Printing technique:	SLA DLP
Power rating:	150 W	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00166
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Weight:	13 kg

€493.00 (coming soon) (Incl. 23% VAT)
(€400.81 Excl. 23% VAT)

Elegoo Neptune 4 Max 3D printer

Zoom in

Description Realise your grand 3D printing plans with the Elegoo Neptune 4 Max 3D printer. At 420mm x 420mm x 480mm, this printer has the largest construction volume within the Elegoo Neptune 4 family. The efficient cooling system, the auto bed levelling at 11 x 11 points and the magnetic PEI building plate make it even easier for you. You can transfer your files quickly and easily via WIFI, WLAN or USB.

Fast and accurate printing
The Neptune 4 Plus comes with the powerful Klipper firmware already installed, allowing your print speed to increase to 500mm/s. The ARM 64-bit 1.5 G quad-core processor also helps with this. The acceleration sensors on the x and y axes automatically calibrate and thus improve print quality. The dual-gear direct extruder ensures fast and precise extrusion, resulting in accurately printed models.

Different filaments
The nozzle heats up to 300℃. This also allows you to easily use materials that need to be printed at a higher temperature, such as ABS, TPU and Nylon. Using these materials gives you many more options for models and prints.

Specifications

Hazard class:	N/A	Printer has USB:	yes
Brand:	ELEGOO	Heatbed max temp:	80 °C
Filament diameter:	1.75 mm	Max print depth:	42 cm
Network:	work ethernet WiFi	Max print height:	48 cm
Dimensions:	740 x 658 x 632 mm	Max print volume:	84.672
Input voltage:	100-240V	Max print width:	42 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00213
Camera included:	no	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	yes	Is liquid:	no
Heated bed included:	yes	Weight:	22.2 kg
Has laser option:	no

€423.00 (coming soon) (Incl. 23% VAT)
(€343.90 Excl. 23% VAT)

Creality 3D Ender-3 S1 3D Printer

Zoom in

Description The Ender 3 S1 3D Printer is a high-quality FDM 3D printer from Creality. The printer distinguishes itself with the simplicity of installation and assembly (it can be prepared for use in just 6 steps), the 'Sprite' Direct Extruder that feeds very precise and constant filament, and the CR Touch process that automatically calibrates the print bed.

In addition, this 3D printer is virtually silent; less than 50dB of noise is produced during printing, so that you will not be disturbed by printing at night. For example, does the print stop due to a power failure or a fully unwound filament roll? Then the printing process will automatically resume as soon as the problem is solved.

The printer features dual Z-axes for smooth movement of the x-axis. When a print is ready, it can be easily removed due to the magnetic and flexible bed.

Tip: Do you want to get started with the 3D printer right away? Then it is wise to order filament separately.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Creality3D	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	100 °C
Network:	no	Max print depth:	22 cm
Dimensions:	62.2 x 45.3 x 48.7 cm	Max print height:	27 cm
Input voltage:	115-230V	Max print volume:	13.068
Nozzle diameter:	0.4 mm	Max print width:	22 cm
Nozzle type:	MK8	No of extruders:	1
Printer bed levelling:	automatic	Printing technique:	TFDM FFF
Printer extruder:	direct	Printer voltage:	24 v/°c
Extruder max temp:	260 °C	Our item no:	DKI00096
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	yes	Weight:	9.1 kg
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€267.00 (coming soon) (Incl. 23% VAT)
(€217.07 Excl. 23% VAT)

Elegoo Jupiter SE 3D printer

Zoom in

Description You can achieve incredible precision and sharp details with the Elegoo Jupiter SE resin 3D printer. The large build volume allows you to effortlessly print 3D models of different sizes. This printer is compatible with the Tango and Chitubox slicers.

Accurate prints & stable temperature
The Jupiter SE has a 12.8-inch 6K Mono LCD screen. The COB+ reflective light source provides uniform and consistent light exposure, allowing you to produce a smoother final product with accurate dimensions. The efficient cooling system ensures a stable temperature during printing, extending the life of your printer.

Large construction volume
This printer has a 51 micron XY resolution and a spacious build volume of 227.848mm x 156.264mm x 300mm. This also allows you to easily make larger prints without sacrificing quality and makes it possible to print multiple prints or parts in a batch. This makes this printer suitable for both professional and personal use.

Automatic resin management system
The Jupiter SE is equipped with an automatic resin management system. This means that resin is automatically supplied and recycled, ensuring a continuous flow of resin during the printing process. Elegoo Jupiter SE also automatically recycles resin, collecting unused resin for future use, reducing waste and saving money.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	ELEGOO	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	15.6 cm
Network:	no	Max print height:	30 cm
Dimensions:	65.75 x 47.99 x 37.74 cm	Max print volume:	12.963
Input voltage:	100-240V	Max print width:	27.7 cm
Light source:	UV LCD	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00249
Camera included:	no	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	no	Is liquid:	no
Heated bed included:	no	Weight:	19.5 kg

Order now, we can ship this on Monday!

€679.50 (Incl. 23% VAT)
(€552.44 Excl. 23% VAT)

in stock

Elegoo Saturn 3 12K 3D printer

Zoom in

Description The Elegoo Saturn 3 resin printer has a 10'' 12K mono LCD screen with a tempered glass plate, which protects the screen from scratches and damage caused by resin leakage. The large build volume opens up a world of possibilities and is perfect for creating larger models and more ambitious projects. The COB (chip-on-board) light source and collimating Fresnel lens work together to create a uniform beam of light that shines onto the resin from the perfect angle. This creates very accurate prints with an exceptional level of detail.

The Saturn 3 12K also has a laser-engraved build plate for better adhesion of the first layer, allowing you to effortlessly print highly detailed and complicated models. The USB air purification filter ensures an odorless printing environment. This allows you to print without worries. You can also choose to use this printer in combination with the Elegoo Mars Mate. This resin printer uses the Voxeldance Tango software, which offers 3 options: static mode and dynamic mode (including smooth mode and high-speed mode).

The most important features:

LCD screen resolution of 11520x5120, XY resolution of 19x24 µm
218.88mm x 122.88mm x 250mm construction volume
COB light source with collimating Fresnel lens
Laser engraved building plate
USB air purification filter

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	ELEGOO	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	12.3 cm
Network:	no	Max print height:	25 cm
Dimensions:	56.73 x 30.59 x 27.3 cm	Max print volume:	6.703
Input voltage:	100-240V	Max print width:	21.8 cm
Max. Light Intensity:	4.4	Printing technique:	SLA DLP
Light source:	UV LCD	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00179
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Wavelength:	405 nm
Heated bed included:	no	Weight:	15.2 kg

Order now, we can ship this on Monday!

€397.00 (Incl. 23% VAT)
(€322.76 Excl. 23% VAT)

in stock

Creality 3D CR-10 SE 3D printer

Zoom in

Description The Creality 3D CR-10 SE 3D printer brings out the creative in you. With a construction volume of 220mm x 220mm x 265mm, you have enough space to bring your ideas to life. This printer also has the option of high-speed printing with a maximum print speed of 600mm/s. The flexible PEI building plate ensures that you can easily remove your print when it is ready.

The perfect first layer
Choose convenience with the accurate hands-free bed levelling system that automatically adjusts the build plate. The CR Touch and a voltage sensor work together to level the build plate and set the z-offset. This makes it easy to get the perfect first layer. The first print layer of the CR-10 SE is sleek, sturdy and uniform. This way you take your print quality and success rate to a new level.

Better prints
The CR-10 SE uses advanced algorithms. The 'Input Shaping' significantly reduces the vibration of the printer, so you experience less ringing and ghosting. The 'Motion Advance' optimises the supply of filament so that there are fewer extrusion problems. It also has a dedicated fan to cool the just printed part of your model from 3 sides. This way you can print improved bridges and overhangs and details will look better. The linear rails on the x and y axes use ball bearings. These ensure that every movement is accurate and smooth. Even after prolonged use, they will continue to function optimally.

Different filaments
The hotend with 60W ceramic heater makes it possible to print without blockages. The hard steel nozzle gives you the option to print with many different types of filaments, such as PLA-CF, PA and HP-ASA. This Creality 3D printer has a 'Sprite' direct drive extruder with two gears. Filament feed and retraction are precise and uniform, even with flexible filaments.

Other functionalities
The CR-10 SE 3D printer can be monitored via your phone (using the Creality Cloud app) and via the PC. Use the printer in combination with the Creality Print slicer to get even more out of your printer. Multiple printers can be controlled simultaneously with both the Creality Cloud and Creality Print.

Specifications

Hazard class:	N/A	Heated bed included:	yes
Brand:	Creality3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	110 °C
Dimensions:	62.5 x 49 x 47 cm	Max print depth:	22 cm
Input voltage:	100-240V	Max print height:	26.5 cm
Nozzle diameter:	0.4 mm	Max print volume:	12.826
Nozzle type:	MK8	Max print width:	22 cm
Power rating:	350 W	No of extruders:	1
Printer bed levelling:	automatic	Printing technique:	TFDM FFF
Printer extruder:	direct	Printer voltage:	24 v/°c
Extruder max temp:	300 °C	Our item no:	DKI00199
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	yes	Weight:	6.9 kg

€387.00 (coming soon) (Incl. 23% VAT)
(€314.63 Excl. 23% VAT)

Anycubic Photon Mono M5s 3D printer

Zoom in

Description The Anycubic Photon Mono M5s resin printer is efficient, smart and easy to use. The Photon Mono M5s has a build volume of 200mm x 218mm x 123mm and can achieve an average print speed of up to 105mm per hour. The high-speed film reduces the chance of failed prints. The Photon Mono M5s' monochrome 10.1-inch 12K LCD screen has a resolution of 11520 x 5120 and an XY pixel size of 19 x 24µm. Ideal for printing hair-fine details.

No levelling
This is a levelling-free resin printer, which distinguishes it from other resin printers. A mechanical sensor detects the distance between the build plate and the levelling module. This then adjusts the distance based on the detected results. This means there are no more problems with levelling and your print has a higher chance of success.

Choose convenience
The automatic check quickly detects and resolves various hardware problems, so you can print with peace of mind and without problems. The resin detection indicates when there is insufficient resin in the printer for the model you want to print. This prevents failed prints due to a shortage of resin. The print status function gives you reminders for common errors. This way you save time and resin. This function can also analyse why a print failed and provide effective suggestions to prevent this.

Anycubic app and slicer
Easily use the printer together with the Anycubic app, which allows you to keep an eye on your printing process. The Anycubic Photon Workshop 3.1 has an 'intelligent mode' that reduces the risk of failed prints by looking at different parameters. The new support algorithm improves the stability of your prints, prevents damage to your model and makes it easier to remove supports.

Specifications

Hazard class:	N/A	Heated bed included:	no
Brand:	Anycubic	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Network:	WiFi	Max print depth:	12.3 cm
Dimensions:	460 x 290 x 270 mm	Max print height:	20 cm
Input voltage:	110-240V	Max print volume:	5.363
Max. Light Intensity:	4.5	Max print width:	21.8 cm
Light source:	UV LED	Printing technique:	SLA DLP
Power rating:	100 W	Printer voltage:	24 v/°c
Printer bed levelling:	automatic	Our item no:	DKI00191
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Weight:	8.9 kg

Order now, we can ship this on Monday!

€399.00 (Incl. 23% VAT)
(€324.39 Excl. 23% VAT)

in stock

Anycubic Photon Mono M5s Pro 3D printer

Zoom in

2
1
0

Description The Anycubic Photon Mono M5s Pro 3D printer is a pioneer among resin 3D printers with a stunning 10.1 inch 14K LCD screen. The screen has a resolution of 13312 x 5120 and an xy resolution of 16.8 x 24.8 µm. This allows you to see the smallest details and sharp edges in your printed model. This 3D printer has an average printing speed of 105mm/s, allowing you to produce a new 3D print very quickly. The Photon Mono M5s Pro has a high-speed ACF film with reduced peel force, giving you a higher chance of successful 3D printing.

Heat & filter module
This 3D printer is equipped with a module that heats the air and filters the air. This module can heat the air to a maximum of 40°C and keep the resin temperature above 20°C. This means you can produce high-quality prints even in a cold environment. The air filter has a carbon filter that effectively absorbs unpleasant odours released when printing with resin. This gives you a comfortable printing environment.

Smart, simple and efficient
The Photon Mono M5s Pro can detect remnants of a previous print and provide an error, so you can clean your tank before starting a new print. In addition, this 3D printer can perform a self-check, which detects whether there are hardware problems. The resin level is also monitored, so you can be sure that there is enough resin in your tank to make your 3D print.

Other functionalities
This 3D printer uses a completely new solution that makes leveling unnecessary. The platform and internal sensors will automatically make the necessary adjustments to ensure that the 3D print is uniform. Take advantage of the new version of the Anycubic app (Android & iOS), where you can find a large number of popular 3D prints that you can make.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Anycubic	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	12.6 cm
Network:	WiFi	Max print height:	20 cm
Dimensions:	460 x 290 x 270 mm	Max print volume:	5.619
Input voltage:	110-240V	Max print width:	22.3 cm
Light source:	UV LED	Printing technique:	SLA DLP
Power rating:	110 W	Printer voltage:	24 v/°c
Printer bed levelling:	automatic	Our item no:	DKI00248
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Weight:	9.4 kg
Heated bed included:	no

€459.50 (coming soon) (Incl. 23% VAT)
(€373.58 Excl. 23% VAT)

Anycubic Photon Mono M5 (12K) 3D printer

Zoom in

Description With the Anycubic Photon Mono M5 resin printer you can create models with razor-fine details. The 10.1-inch 12K monochrome LCD screen has a resolution of 11520 x 5120 and an XY pixel size of 19 x 24 µm. This way, even the smallest details are captured. The construction volume of 200mm x 218mm x 123mm offers enough space to give free rein to your creativity.

Professional and stable printing
The Photon Mono M5 provides a better printing experience thanks to the laser-engraved build plate. This means the print stays in place better and the chance of the model coming loose during printing is much smaller. The print will also deform less quickly. The z-axis dual linear rails and a POM nut provide highly precise z-axis movements without shaking. This way, the low noise is effectively reduced and details will be clearly visible.

Anycubic app and slicer
Easily use the printer together with the Anycubic app, which allows you to monitor your printing process. The Anycubic Photon Workshop 3.1 has a simplified UI that makes slicing easier. To increase the chance of success of your print, you can use the 'model repairing' function. The new support algorithm improves the stability of your prints, prevents damage to your model and makes it easier to remove supports.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Anycubic	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	12.3 cm
Network:	WiFi	Max print height:	20 cm
Dimensions:	460 x 290 x 270 mm	Max print volume:	5.363
Input voltage:	110-240V	Max print width:	21.8 cm
Light source:	UV LED	Printing technique:	SLA DLP
Power rating:	100 W	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00190
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Weight:	8.6 kg
Heated bed included:	no

€367.00 (coming soon) (Incl. 23% VAT)
(€298.37 Excl. 23% VAT)

Anycubic Photon Mono X 6Ks 3D Printer

Zoom in

Description The Anycubic Photon Mono The construction volume of no less than 195.84mm x 122.4mm x 200mm makes it possible to make larger prints or multiple prints in one go. This opens up the opportunity to work even more creatively and productively.

The updated LightTurbo Matrix light source and the textured optical lens effectively remove visible layers, making the surface of your model very smooth while sharp and fine details are still visible.

The double linear rails provide extra precision and stability, so you can always print as accurately as possible. The laser-engraved aluminum building plate ensures better first layer adhesion and prevents warping. This Anycubic resin printer comes with a free improved version of Anycubic Photon Workshop 3.0 slicer. The simple UI and new functions make every print a success.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Anycubic	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	12.24 cm
Network:	no	Max print height:	20 cm
Dimensions:	41.7 x 26 x 29 cm	Max print volume:	4.794
Input voltage:	100-240V	Max print width:	19.58 cm
Light source:	UV LED	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00174
Camera included:	no	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	no	Is liquid:	no
Heated bed included:	no	Weight:	8.5 kg

€267.00 (coming soon) (Incl. 23% VAT)
(€217.07 Excl. 23% VAT)

Uniformation GK3 Ultra 16K 3D printer Pre-Order

Uniformation GK3 Ultra 16K 3D printer DKI00289

Zoom in

2
1
0

Description Pre-Order: This item is expected in November 2024.

Create stunning resin 3D prints with the GK3 Ultra 16K 3D printer from Uniformation. This printer has a maximum build volume of 300mm x 160mm x 300mm, an XY resolution of 15120 x 6230 and a pixel pitch of 20 x 26 µm. The 13.5 inch 16K mono LCD screen is 302.4mm x 161.98mm. This allows you to create large 3D prints with sharp details.

User friendly
Thanks to its convenient features, this 3D printer is very user-friendly. The lid opens upwards and the parts are easy to remove for maintenance or replacement. You can easily detach the build plate and place it on the drip hanger to let the excess resin drain before you let your 3D print cure. This prevents resin drips from curing, which can cause unevenness in the surface of your 3D print.

Smart features
The GK3 Ultra is equipped with an automatic resin supply system. This means you no longer have to worry about adding resin yourself. You place the resin bottle in the tank and it will automatically be guided to the barrel, even during 3D printing. This way, there is always enough resin available to make your 3D print. In addition, this system monitors whether there is any leftover resin. The smart auto-detection heat system constantly ensures the right temperature, so that your 3D prints can be printed even better.

Other functionalities
The GK3 is designed to be very sturdy. The dual linear rails ensure that the machine wobbles less. This creates tighter 3D prints and increases the quality of your prints. The printer uses 200W and the vat can hold 1100ml of resin. You can easily control this 3D printer via the 5 inch touchscreen and slice files with the UniFormation Slicer, Chitubox or Lychee. Send files via wifi, ethernet or use a USB stick.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Included with the GK3 Ultra:

Construction sheet
Resin barrel
Charging cable
USB stick
Screen protector
nFEP film
USB wifi
Tools (such as pliers, metal scraper, and a funnel)

*Please note that all pre-order delivery dates are subject to change without warning. You can cancel your order for a refund at any time prior to delivery.

Specifications

Hazard class:	N/A	Max print depth:	16 cm
Brand:	Uniformation	Max print height:	30 cm
UV wavelength:	405 nm	Max print volume:	14.4
Network:	work ethernet WiFi	Max print width:	30 cm
Dimensions:	575 x 455 x 400 mm	Printing technique:	SLA DLP
Input voltage:	110-220V	Tunnel code:	N/A
Printer bed levelling:	automatic	Packing group:	NO
Printer has USB:	yes	Is liquid:	no

€1,210.00 (coming soon) (Incl. 23% VAT)
(€983.74 Excl. 23% VAT)

Phrozen Sonic Mega 8K S 3D printer

Zoom in

2
1
0

Description Print multiple models at once or create larger 3D prints faster with the Sonic Mega 8K S resin 3D printer from Phrozen. With an average printing speed of 600 layers per hour, you can produce stunning 3D prints quickly and efficiently.

Choose Convenience Easily control the printer using the 3.5-inch touchscreen. The 15-inch build plate and the print volume of 330mm x 185mm x 300mm provide ample space for one large or several small prints. The built-in drip mechanism prevents drips in your workspace, and the new lid design ensures you always know where it is. This design also offers better access to your prints, reducing the chance of accidentally damaging them.

Both the Phrozen Sonic Mega 8K and the Sonic Mega 8K S produce excellent 3D models, suitable for hobbyists and professionals alike. However, there are some differences: Sonic Mega 8K: Designed for rapid prototypes and detailed models, it has a construction volume of 330mm x 185mm x 400mm with doors that open to the side. Sonic Mega 8K S: Ideal for custom designs and small 3D printing businesses, it features a construction volume of 330mm x 185mm x 300mm and a lid that opens upwards, requiring less surrounding space. It includes a built-in, all-metal drip hanger and the option to connect the Pump & Fill accessory, eliminating the need to manually add extra resin for large prints.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	-	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	18.5 cm
Network:	no	Max print height:	30 cm
Dimensions:	566 x 472 x 380 mm	Max print volume:	18.31
Input voltage:	100-240V	Max print width:	33 cm
Light source:	UV LCD	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00246
Camera included:	no	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	no	Is liquid:	no
Heated bed included:	no	Weight:	26 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€1,799.00 (coming soon) (Incl. 23% VAT)
(€1,462.60 Excl. 23% VAT)

Elegoo Mars 4 9K 3D printer

Zoom in

Description The Mars 4 9K from Elegoo is a fantastic resin printer with a powerful COB (chip-on-board) light source that ensures accurate prints. With a build volume of 153.36 x 77.76 x 175mm³ you have enough space to make your prints. The surface of the build plate is laser cut, which ensures excellent layer adhesion. The printer has a 7-inch 9K mono LCD with 8520 x 4320 resolution and 18µm XY precision, allowing you to print intricate models in great detail. The UI of the 3.5'' touchscreen is very user-friendly. You can easily preview the model you are about to print and the screen shows real-time progress, allowing you to make adjustments at any time.

The Mars 4 uses the Voxeldance Tango Slicer, which provides a better experience. This software offers different print options: static mode and dynamic mode (including smooth mode and high-speed mode). The improved plug-in purifier has a plastic protective layer to protect the carbon filter and reduces the resin odor that is released during printing. A large fan and heat conductive copper tubes next to the light source allow for faster heat dissipation, improving the printer's performance and extending its life.

In addition, the z-axis has a linear rail that ensures precise and stable movements. This gives your print a smoother surface. The non-slip leveling screws make it easy to level the PCB. The print plate is also engraved for better layer adhesion and the center plate has a small elevation to prevent the resin from reaching the parts of the printer.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	ELEGOO	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	15.636 cm
Network:	no	Max print height:	17.5 cm
Dimensions:	438.5 x 227 x 227 mm	Max print volume:	2.666
Input voltage:	100-240V	Max print width:	7.76 cm
Max. Light Intensity:	4	Printing technique:	SLA DLP
Light source:	UV-COB	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00183
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Weight:	15.3 kg
Heated bed included:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€267.00 (coming soon) (Incl. 23% VAT)
(€217.07 Excl. 23% VAT)

Elegoo Mars 4 Ultra 9K 3D printer

Zoom in

Description With the ELEGOO Mars 4 Ultra you can easily print complex models while retaining the smallest details. The 7-inch 9K mono LCD screen with 8520x4320 resolution and 18µm XY resolution ensures that you can make sharp prints in an instant. With the ELEGOO Mars 4 Ultra it is possible to achieve a printing speed of 150 mm per hour. The LCD screen is protected with a tempered glass plate, so that it is not damaged during daily use. With the built-in 4G RAM, you never have to worry about a delay in loading files again. The powerful Linux OS control ensures fast and smooth operation and by connecting to a 2.4G or 5G WiFi network, you can send models to the printer super quickly.

The build area of 153.36mm x 77.76mm x 165mm³ offers enough space to make medium-sized prints. The leveling system, which levels at 4 points, ensures that you can quickly start printing. The laser engraved surface of the build plate provides better layer adhesion and thus reduces the chance of the print failing. With the brand new ACF film you are assured of a successful print, even with a high print speed. The plug-in air filter has a new carbon filter that removes the unpleasant smell of printing with resin. Not only does this improve the printing experience, but you also print in a cleaner environment for yourself with less chance of ingesting toxic substances. Easily find your way via the user-friendly 4'' HD IPS touchscreen with a resolution of 800x480 pixels, which supports no fewer than 12 different languages.

The ELEGOO Mars 4 Ultra has a full metal machine housing, making the printer very stable and easy to use frequently. The modern design is also aesthetically pleasing to look at. The printer's internal components are protected from resin by a raised center plate.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	ELEGOO	Printer has USB:	yes
UV wavelength:	405 nm	Max print depth:	15.636 cm
Network:	no	Max print height:	16.5 cm
Dimensions:	44.35 x 22.7 x 22.7 mm	Max print volume:	2.006
Input voltage:	100-240V	Max print width:	7.776 cm
Max. Light Intensity:	4	Printing technique:	SLA DLP
Light source:	UV-COB	Printer voltage:	24 v/°c
Printer bed levelling:	manual	Our item no:	DKI00182
3D print option:	yes	Tunnel code:	N/A
Camera included:	no	Packing group:	NO
Has CNC option:	no	Is liquid:	no
Filament sensor:	no	Weight:	17.3 kg
Heated bed included:	no

Order now, we can ship this on Monday!

€273.00 (Incl. 23% VAT)
(€221.95 Excl. 23% VAT)

in stock

Snapmaker Artisan 3-in-1 Premium 40 Watt 3D Printer & Enclosure

Zoom in

Description Bring all your creative ideas to life with the Snapmaker Artisan 3-in-1 Premium. This machine allows you to use no less than 3 techniques: 3D printing, laser engraving and laser cutting. The possibilities are endless thanks to the work surface of 400mm × 400mm × 400mm. The Artisan 3-in-1 Premium has a class 1 certification for safety, which means that the laser is safe to use. The full metal design and sturdy linear rails make it a durable design.

Easy to use
Switch easily and quickly between the different options. Use the 40 W laser engraving module, the 200 W CNC laser cutting module and the dual extrusion 3D printing option. Use the dual extrusion in combination with soluble filament to, for example, be able to remove supports more easily after printing. The quick swap design makes it possible to easily exchange both the different modules and platforms as well as hotends.

Useful features
The advanced vibration compensation helps to work accurately, even at high speeds. This allows the machine to produce straight lines and you get a better end result. The camera gives you a direct and complete view of your laser work. Because the CNC module can handle up to 200W, it is possible to use many different materials, including hardwood, jade and other hard materials. The wide 7 inch touchscreen has an intuitive UI design, making it easy to operate. Use the Luban software and get started on your project quickly.

Specifications

Hazard class:	N/A	Has laser option:	yes
Brand:	Snapmaker	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	110 °C
Network:	WiFi	Max print depth:	40 cm
Dimensions:	63.4 x 58 x 62 cm	Max print height:	40 cm
Input voltage:	100-240V	Max print volume:	64
Printer bed levelling:	automatic	Max print width:	40 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Tunnel code:	N/A
Has CNC option:	yes	Packing group:	NO
Filament sensor:	yes	Is liquid:	no
Heated bed included:	yes	Weight:	52.9 kg

This item is shipped on a pallet due to its weight/size.

Please note: This item has an average delivery time of 1 week.

€3,299.50 (coming soon) (Incl. 23% VAT)
(€2,682.52 Excl. 23% VAT)

Snapmaker J1s 3D Printer

Zoom in

Description The Snapmaker J1s 3D printer is an ultra-fast and easy-to-use 3D printer that offers everything you need to start printing quickly. The J1s has a print speed of 350 mm/s and an acceleration of up to 10,000 mm/s².

Be more productive
The independent dual extruder (IDEX) makes it possible to print soluble or easy-to-break supports that can be easily removed later. Copy and mirror mode helps you be more productive. After printing, simply remove the model from the glass, double-sided PEI build plate.

Many different materials
This direct drive 3D printer has hot ends that can handle up to 300℃ and a heated bed of 100℃. This also allows materials such as PC, Nylon/PA and TPU to be printed effortlessly. The built-in nozzle sweeper ensures that the nozzle always remains clean, preventing blockages.

Other specifications
You can easily operate the J1s via the intuitive 5-inch touchscreen. The enhanced cooling system regulates the ambient temperature inside the printer and provides cooling during high-speed printing. Due to the sturdy housing of the printer, the expected lifespan is more than 10 years.

Differences between the Snapmaker J1 and the J1s:

The J1s has an additional fan and the top panel does not need to be removed to print with PLA.
The doors and side panels are already installed on the J1s, so you can start right away.
If you would like to purchase a J1 model and you need extra cooling, you can choose a J1 with an upgrade kit or a J1s.

Specifications

Hazard class:	N/A	Printer has USB:	yes
Brand:	Snapmaker	Heatbed max temp:	100 °C
Filament diameter:	1.75 mm	Max print depth:	20 cm
Network:	WiFi	Max print height:	20 cm
Dimensions:	464 x 539 x 401 mm	Max print volume:	12
Input voltage:	100-240V	Max print width:	30 cm
Printer bed levelling:	manual	No of extruders:	2
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00173
Camera included:	no	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	yes	Is liquid:	no
Heated bed included:	yes	Weight:	25 kg
Has laser option:	no

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€1,475.00 (coming soon) (Incl. 23% VAT)
(€1,199.19 Excl. 23% VAT)

Flsun Q5 Delta 3D Printer

Zoom in

Description The Flsun Q5 3D printer is a compact printer and is perfect if you are printing at high speed or printing something that requires high level of detail. The delta design reduces weight on the print head, allowing for smoother and faster control. With a cylindrical build volume of 200mm x 200mm, Titan extruder and a handy 2.4-inch touchscreen, the Flsun Q5 is equipped with many upgrades and therefore stands out above other printers in this class.

The main features

High print speed 70mm/s-120mm/s.
Easy assembly.
Powerful 32-Bit Motherboard.
TMC2208 silent steps drivers

Construction
The Flsun Q5 consists of a sturdy triangular aluminium frame with a matte black coating and yellow slot covers. The stepper motors that drive the sliders via a belt are located in the upper part. Thanks to the use of TMC2208 Drivers, the printer is quieter. The power supply and motherboard are located in the upper part of the printer. In general, delta printers are more difficult to calibrate than cartesian printers, but calibration of the Flsun Q5 comes with a handy calibration tool to facilitate this process. This tool has a magnetic strip, which makes it easy to apply and remove. The printer is also equipped with thermal runaway protection.

Specifications

Hazard class:	N/A	Has laser option:	no
Brand:	Flsun	Printer has USB:	yes
Filament diameter:	1.75 mm	Heatbed max temp:	110 °C
Network:	no	Max print depth:	20 cm
Dimensions:	650 x 300 x 300 mm	Max print height:	20 cm
Input voltage:	115-230V	Max print volume:	6.28
Nozzle diameter:	0.4 mm	Max print width:	20 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	270 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00116
Camera included:	no	Tunnel code:	N/A
Has CNC option:	no	Packing group:	NO
Filament sensor:	no	Is liquid:	no
Heated bed included:	yes	Weight:	7 kg

Extra Information

3D Filament
Print bed accessories
Cleaning items

Order now, we can ship this on Monday!

€227.00 (Incl. 23% VAT)
(€184.55 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

All 3D printers

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

All 3D printers