Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Creality3D Creality 3D CR-10S Pro service kit 200103419 DHO00003

Description This complete service kit is suitable for the CR-10S Pro. Of course it can also be used for DIY 3D printers. The hotend is suitable for 1.75mm filament. The operating voltage of the heating element is 24V.

The kit contains the following parts:

2 x Nozzle
1 x Heater cartridge
1 x Thermistor
2 x V-lock wheel
2 x Endstop
1 x 2 metre timing belt

Specifications

Hazard class:	N/A	Our item no:	DHO00003
Brand:	Creality3D	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

€19.75 (Incl. 23% VAT)
(€16.06 Excl. 23% VAT)

5-7 day delivery

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this today!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

5-7 day delivery

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Zoom in

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	ANTCLABS	Packing group:	NO
Cable length:	15 cm	Is liquid:	no
Manual:	Download	Voltage VDC:	5 v/°c
Our item no:	DAR00016	Weight:	0.01 kg

Order now, we can ship this today!

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

in stock

Heated bed spring, 25mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs of your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be leveled less often.

Specifications

Hazard class:	N/A	Outer diameter:	8 mm
Brand:	123-3D	Our item no:	DME00139
Colour:	orange	Tunnel code:	N/A
Inner diameter:	5 mm	Packing group:	NO
Length:	25 mm	Is liquid:	no

Order now, we can ship this today!

€5.75 (Incl. 23% VAT)
(€4.67 Excl. 23% VAT)

in stock

Heated bed spring, 30mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs for your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be leveled less often.

Specifications

Hazard class:	N/A	Outer diameter:	8 mm
Brand:	123-3D	Our item no:	DME00298
Colour:	orange	Tunnel code:	N/A
Inner diameter:	5 mm	Packing group:	NO
Length:	30 mm	Is liquid:	no

Order now, we can ship this today!

€5.75 (Incl. 23% VAT)
(€4.67 Excl. 23% VAT)

in stock

Creality 3D Printer housing, 760mm x 650mm x 720mm

Zoom in

Description The Creality 3D printer housing (M) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapors and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. Measuring 760mm x 650mm x 720mm, it is suitable for open frame printers such as the Ender-3 series, Ender-5 (Pro) CP-01, CR-X, CR-6 SE, CR-10 (S/Pro/ Mini/V2/V3), CR-20 series and others.

Specifications

Hazard class:	N/A	Our item no:	DAR00262
Brand:	Creality3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	720 x 760 x 650 mm	Is liquid:	no

Extra information

Video

Order now, we can ship this today!

€85.50 (Incl. 23% VAT)
(€69.51 Excl. 23% VAT)

in stock

Creality 3D Printer housing, 700mm x 750mm x 900mm

Zoom in

Description The Creality 3D printer housing (L) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapors and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. With dimensions of 700mm x 750mm x 900mm, it is suitable for open frame printers such as the Ender-3 series, Ender-5 (Pro/Plus) CP-01, CR-X (Pro), CR-6 SE, CR-10 (S/Pro/Mini/V2/V3), CR-20 series and others.

Specifications

Hazard class:	N/A	Our item no:	DAR00263
Brand:	Creality3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	900 x 700 x 750 mm	Is liquid:	no

Extra information

Video

Order now, we can ship this today!

€93.50 (Incl. 23% VAT)
(€76.02 Excl. 23% VAT)

in stock

Mean Well closed chassis power supply | 24V | 504W, 21A

Zoom in

Description This 21A switching power supply with PFC is protected against short circuit, overload and overvoltage between 13.8V - 16.2V. The power supply is suitable for professional use and must be installed by a qualified technician. Input voltage: 115V / 230V.

This power supply has a DC voltage of 24V and is suitable for a maximum consumption of 504W.

Additional product information (PDF)

Specifications

Hazard class:	N/A	Power rating:	504 W
Brand:	MEAN WELL	Our item no:	DAR00046
Current rating:	21 A	Tunnel code:	N/A
Dimensions:	40.5 x 230 x 127 mm	Packing group:	NO
Input voltage:	100-240V	Is liquid:	no
Output voltage:	24 v/°c	Weight:	1.3 kg

Order now, we can ship this today!

€159.50 (Incl. 23% VAT)
(€129.67 Excl. 23% VAT)

in stock

Creality 3D CR-10 S Pro bonding platform sticker, 310mm x 320mm

Zoom in

Description With this Creality 3D adhesive platform sticker you can provide your current print surface with a new adhesive layer if the original print surface is damaged.

The sticker has a good 3M adhesive layer, so the sticker adheres very well to the heatbed of your printer. This Creality sticker is compatible with the Creality CR-10 3D printer.

Note: This is the sticker only. You must remove your old decal before applying the new decal.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Dimensions:	32 x 31 cm	Is liquid:	no
Our item no:	DAR00021

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€19.75 (coming soon) (Incl. 23% VAT)
(€16.06 Excl. 23% VAT)

Creality 3D CR-10S Pro glass plate, 310mm x 320mm x 4mm

Zoom in

Description This Creality 3D glass plate for the CR-10S Pro 3D printer is made of tempered glass and provided with an Ultrabase coating for perfect adhesion of the 3D prints. The glass plate is easy to clean with water.

Note: Extreme adhesion of PETG filament can damage the glass.

Due to the thickness of 4mm, the glass plate cannot fit on the original clamps on the bed.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Dimensions:	4 x 310 x 320 mm	Is liquid:	no
Our item no:	DHB00039

Order now, we can ship this today!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

Micro Swiss all metal Hotend Kit for Creality CR-10S PRO | CR-10 Max

Zoom in

Description

This all-metal hot-end set from Micro Swiss for the Creality CR-10S Pro is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and thus ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost 3x lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heat break
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
silicone sock
Fasteners

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
		Creality CR-10S Pro
		Creality CR 10 Max

Specifications

Hazard class:	N/A	Our item no:	DMS00022
Brand:	Micro Swiss	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

€67.00 (Incl. 23% VAT)
(€54.47 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.20mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.2mm.

Compatible with the following printers:

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Hazard class:	N/A	Our item no:	DMS00117
Brand:	Micro Swiss	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.2 mm

Order now, we can ship this today!

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

in stock

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.30mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.3mm.

Compatible with the following printers:

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Hazard class:	N/A	Our item no:	DMS00118
Brand:	Micro Swiss	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.3 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.40mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Hazard class:	N/A	Our item no:	DMS00089
Brand:	Micro Swiss	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.4 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.60mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Hazard class:	N/A	Our item no:	DMS00090
Brand:	Micro Swiss	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.6 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.80mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers:

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Hazard class:	N/A	Our item no:	DMS00119
Brand:	Micro Swiss	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	twinclad XT	Is liquid:	no
Nozzle diameter:	0.8 mm

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

5-7 day delivery

Brass coated nozzle | 1.75mm x 0.4mm (123-3D version)

Zoom in

Description This compatible nozzle is suitable for MK8 extruders and intended for filament with a diameter of 1.75mm. The nozzle has an opening of 0.4mm and is equipped with M6 x 0.75mm screw thread. MK8 nozzles are slightly shorter than the older MK7 version.

Compatible with the following printers:

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Hazard class:	N/A	Our item no:	DMK00033
Brand:	123-3D	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.4 mm

€7.00 (Incl. 23% VAT)
(€5.69 Excl. 23% VAT)

5-7 day delivery

Creality M6x.75 brass nozzle, 0.20mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.2mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Hazard class:	N/A	Our item no:	DAR00295
Brand:	123-3D	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.2 mm

€7.00 (Incl. 23% VAT)
(€5.69 Excl. 23% VAT)

5-7 day delivery

Creality M6x.75 brass nozzle, 0.30mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.3mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Hazard class:	N/A	Our item no:	DAR00296
Brand:	123-3D	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.3 mm

€7.00 (Incl. 23% VAT)
(€5.69 Excl. 23% VAT)

5-7 day delivery

Creality M6x.75 brass nozzle, 0.40mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.4mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Hazard class:	N/A	Our item no:	DAR00297
Brand:	123-3D	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.4 mm

Order now, we can ship this today!

€7.00 (Incl. 23% VAT)
(€5.69 Excl. 23% VAT)

in stock

Creality M6x.75 brass nozzle, 0.50mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.5mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Hazard class:	N/A	Our item no:	DAR00298
Brand:	123-3D	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.5 mm

€7.00 (Incl. 23% VAT)
(€5.69 Excl. 23% VAT)

5-7 day delivery

Creality M6x.75 brass nozzle, 0.60mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.6mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Hazard class:	N/A	Our item no:	DAR00299
Brand:	123-3D	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.6 mm

Order now, we can ship this today!

€7.00 (Incl. 23% VAT)
(€5.69 Excl. 23% VAT)

in stock

Creality M6x.75 brass nozzle, 0.80mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 x.75 thread and has an opening of 0.8mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Hazard class:	N/A	Our item no:	DAR00300
Brand:	123-3D	Screwthread type:	M6X75
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	none	Is liquid:	no
Nozzle diameter:	0.8 mm

Order now, we can ship this today!

€7.00 (Incl. 23% VAT)
(€5.69 Excl. 23% VAT)

in stock

Creality 3D Sonic Pad

Zoom in

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Colour:	black	Is liquid:	no
Standard WiFi connection:	802.11 b/g/n	Voltage:	12 v
Dimensions:	40 x 222 x 128 mm	Weight:	0.46 kg
Our item no:	DAR00885

Order now, we can ship this today!

€159.50 (Incl. 23% VAT)
(€129.67 Excl. 23% VAT)

in stock

Creality 3D CR-10S Pro and CR-10 Max transfer board

Zoom in

Description This transfer board forms the link between the flat cable and the extruder of the CR-10S Pro and the CR-10 Max.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Our item no:	DAR00032	Is liquid:	no

€29.50 (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

5-7 day delivery

Creality 3D CR-10S Pro & CR-10 max mainboard

Zoom in

Description This Creality 3D mainboard can be used in the CR-10S Pro and CR-10 Max 3D printers. However, the correct firmware must be installed for each compatible printer to work.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
On-board stepper drivers:	5	Is liquid:	no
Our item no:	DRW00045

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€89.50 (coming soon) (Incl. 23% VAT)
(€72.76 Excl. 23% VAT)

USB A to mini USB black USB 2.0 cable, 1m

Zoom in

Description This USB cable has a length of 100cm and is suitable for connecting various electronics to a computer.

Specifications

Hazard class:	N/A	Insulation material:	PVC
Brand:	Value Line	Our item no:	DDK00122
Cable length:	100 cm	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Connector A:	USB A 2 male	Is liquid:	no
Connector B:	Micro USB B HDMI male

Order now, we can ship this today!

€3.75 (Incl. 23% VAT)
(€3.05 Excl. 23% VAT)

in stock

Bondtech DDX V3 PH1 for Creality CR-10 (S) Pro & Max

Zoom in

Description Bondtech's DDX V3 PH1 replaces the original Bowden extruder with a direct drive extruder setup. The model is suitable for Creality 3D printers and is compatible with hot ends of almost every Creality model. You can also upgrade the hotend to Copperhead or Mosquito.

With this powerful 1.75mm Dual Drive extruder you achieve a higher print quality and you have more options, such as thinner layers, higher resolution prints with small nozzles, high flow prints with larger nozzles and a wider choice of materials.

Further highlights:

Effective hot end cooling
3:1 gear ratio
Housing parts made of polyamide (PA12) with SLS technology for maximum strength and precision

Please Note: A Bondtech DDX Adapter Kit is required to use this product.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00050

€147.50 (Incl. 23% VAT)
(€119.92 Excl. 23% VAT)

5-7 day delivery

Creality3D CR-5 Pro touch screen

Zoom in

Description This Creality3D CR-5 Pro touch screen is to replace your broken or old touch screen. It is compatible with Creality3D CR-5 Pro 3D printers.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Our item no:	DAR00269	Is liquid:	no

€78.50 (Incl. 23% VAT)
(€63.82 Excl. 23% VAT)

5-7 day delivery

Direct Drive Extruder plate for E3D Hemera Extruder (123-3D brand)

Zoom in

Description The black Direct Drive Extruder plate for E3D Hemera Extruder from 123-3D is made of anodized aluminum. It is easy to assemble on your Creality 3D printer.

This pack contains:

1 Extruder plate
1 Allen key
2 tie wraps
Set screws

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	black	Is liquid:	no
Our item no:	DAR00790

€11.50 (Incl. 23% VAT)
(€9.35 Excl. 23% VAT)

5-7 day delivery

Creality 3D Pad 5" HD touchscreen

Zoom in

Description The Creality 3D pad allows you to visualise and track the progress of your 3D print. With a better view of the print model, you prevent errors earlier and the printing process becomes more intuitive. The 5 inch HD screen has 854 x 480 ppi and has a very high sensitivity. The touchscreen is suitable for all FDM 3D printers with Marlin firmware. Thanks to the Plug and Print principle, you can easily connect the Creality 3D pad to your 3D printer.

Properties:

Print effects: create texture with one click, e.g. with 3D prints of animals
Power Loss Resume: Keeping the Design
Filament Run-out Detection: no more blank prints
11+ languages available

The Creality Pad 5" is compatible with the following printers:
CR-10S, CR-10S Pro, CR-5 Pro, CR-5 Pro H, CP-01, Ender-3 Max, Ender-3, Ender-3 Pro, Ender-3 S1, Ender-3 V2, Ender-5 Pro, Ender-5 Plus, Ender-7, CR-10 V3, CR-10 V2, CR-10 Max, CR-6 SE, CR-6 Max, CR-30, CR-X Pro and the CR-200B.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Colour:	black	Is liquid:	no
Dimensions:	13.5 x 133.5 x 76.2 mm	Weight:	0.295 kg
Our item no:	DAR00818

Order now, we can ship this today!

€67.50 (Incl. 23% VAT)
(€54.88 Excl. 23% VAT)

in stock

Micro Swiss Bowden Dual Gear Extruder

Zoom in

Description The Micro Swiss Bowden dual drive extruder is designed as a quick and easy replacement for most Bowden-type 3D printers.

Most important features:

• Dual drive
• Hardened tool steel, CNC precision cut gears
• Adjustable filament grip
• Easy filament loading
• Excellent extrusion control
• E-steps value: 130

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Micro Swiss	Packing group:	NO
Our item no:	DMS00121	Is liquid:	no

Order now, we can ship this today!

€49.50 (Incl. 23% VAT)
(€40.24 Excl. 23% VAT)

in stock

Creality 3D CR-10S Pro / CR-X | Y-axis GT2 timing belt, 89cm

Zoom in

Description This GT2 timing belt has finished ends and can be used directly on the Y axis of the Creality 3D CR-10S Pro and CR-X printers.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Length:	89 cm	Is liquid:	no
Our item no:	DAR00037

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€6.75 (coming soon) (Incl. 23% VAT)
(€5.49 Excl. 23% VAT)

Creality 3D CR-10S Pro X-axis GT2 timing belt, 94cm

Zoom in

Description This GT2 timing belt has finished ends and can be used directly on the X axis of the Creality 3D CR-10S Pro printer.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Length:	94 cm	Is liquid:	no
Our item no:	DAR00038

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€6.75 (coming soon) (Incl. 23% VAT)
(€5.49 Excl. 23% VAT)

Creality 3D end stop

Zoom in

Description This mechanical end stop is applicable to the Creality CR-10mini and CR-10s series

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Our item no:	DEL00008	Is liquid:	no

Order now, we can ship this today!

€5.25 (Incl. 23% VAT)
(€4.27 Excl. 23% VAT)

in stock

Creality 3D endstop (2-pack)

Zoom in

Description This mechanical end stop is applicable to the Creality CR-10 mini and CR-10s series

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Our item no:	DAR01019	Is liquid:	no

Order now, we can ship this today!

€7.95 (Incl. 23% VAT)
(€6.46 Excl. 23% VAT)

in stock

Creality 3D CR-X Hotend Thermistor 100K | 60cm cable with connector

Zoom in

Description This Creality 3D hotend thermistor has a cable length of 60cm and is suitable for replacing the hotend thermistor of the following Creality printer models: CR-10S Pro, CR-X and the CR-10 V2. But it can also be used for other printers that use a 100K temperature sensor.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Cable length:	60 cm	Is liquid:	no
Our item no:	DAR00043

€8.50 (Incl. 23% VAT)
(€6.91 Excl. 23% VAT)

5-7 day delivery

Creality 3D CR-10S Pro / CR-X heater cardridge with connector | 24V, 40W | 60cm

Zoom in

Description Original Creality 3D heater cartridge suitable for the CR-10S Pro and the CR-X 3D Printers.

Specifications

Hazard class:	N/A	Our item no:	DAR00044
Brand:	Creality3D	Tunnel code:	N/A
Cable length:	60 cm	Packing group:	NO
Cartridge diameter:	6 mm	Is liquid:	no
Cartridge length:	20 mm	Voltage:	24 v
Power rating:	40 W

€8.25 (Incl. 23% VAT)
(€6.71 Excl. 23% VAT)

5-7 day delivery

Creality 3D CR-10S Pro Throat tube / Heatbreak M6-0.75

Zoom in

Description Original heatbreak for the Creality CR-10S Pro 3D printer.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Our item no:	DAR00049	Is liquid:	no

€8.50 (Incl. 23% VAT)
(€6.91 Excl. 23% VAT)

5-7 day delivery

Creality 3D CR-10S Pro Heating block for M6-0.75 nozzle

Zoom in

Description Original replacement heater block for the Creality 3D CR-10S Pro hotend.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Colour:	red	Is liquid:	no
Our item no:	DAR00066

€8.50 (Incl. 23% VAT)
(€6.91 Excl. 23% VAT)

5-7 day delivery

Creality 3D CR-10S Pro X engine back panel

Zoom in

Description Replacement back panel for the X-axis motor on the Creality 3D CR-10S Pro.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Our item no:	DAR00068	Is liquid:	no

€10.50 (Incl. 23% VAT)
(€8.54 Excl. 23% VAT)

5-7 day delivery

Creality 3D CR-10S Pro / CR-X Heatbed Y-axis frame including V-Slot wheels

Zoom in

Description Original heated bed frame for Creality CR-10S Pro and CR-X 3D printers. The frame comes with V-slot wheels for easy replacement.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Our item no:	DAR00074	Is liquid:	no

€65.50 (Incl. 23% VAT)
(€53.25 Excl. 23% VAT)

5-7 day delivery

Creality 3D Laser module 5W | 24V

Zoom in

Description Open a world of extra possibilities by converting your 3D printer into a laser engraving machine with this Creality 3D Laser module 5W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration you can use the focus lens and lever. Gently push this lever down to focus accurately. When you have finished focusing, you can raise the lever again for safe storage.

Other functionalities
You can engrave accurately up to 0.06mm thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05mm sheet of balsa wood. In addition, this laser module offers the possibility of working with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engrave and cut, or pause the current action. By using a TF card/MicroSD card you can also make beautiful creations without the 3D printer being connected to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Power rating:	5 W	Is liquid:	no
Our item no:	DAR00962	Voltage:	24 v

€149.00 (Incl. 23% VAT)
(€121.14 Excl. 23% VAT)

5-7 day delivery

Phaetus Dragonfly Hotend HIC HF

Zoom in

Description Create perfect details with the Phaetus Dragonfly Hotend HIC HF. Thanks to the High Impact Cooling technology, the heat from the hotend is optimally dissipated and the temperature remains stable. The hotend is made of hardened steel, making it wear-resistant. You can easily replace the nozzle and heat block, making maintenance and repair easy. The longer nozzle allows you to print even and smooth prints. The thin wall thickness of 0.25mm ensures good heat insulation and prevents filament clogging.

Specifications

Hazard class:	N/A	Nozzle diameter:	0.4 mm
Brand:	-	Our item no:	DAR00973
Colour:	black	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Dimensions:	57.5 x 26 x 21 mm	Is liquid:	no
Max operating temp:	350 °C	Weight:	0.07 kg

€75.50 (Incl. 23% VAT)
(€61.38 Excl. 23% VAT)

5-7 day delivery

Creality 3D PEI bonding platform kit, 320mm x 310mm x 2mm

Zoom in

Description This magnetic PEI bonding platform kit from Creality is suitable for the following Creality printers:

CR-10S PRO
CR-10S PRO V2
CR-10 V2
CR-10 V3

CR-X
CR-X Pro
Ender-3 Max

Use this set as a replacement for your current bonding platform or as an extra build plate to continue printing as quickly as possible after your print is ready.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Dimensions:	2 x 320 x 310 mm	Is liquid:	no
Our item no:	DAR01102

Order now, we can ship this today!

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

in stock

123-3D flexible magnetic PEI bed, 320mm x 310mm

Zoom in

Description This 320mm x 310mm flexible, magnetic PEI bed from 123-3D is a perfect upgrade for your 3D printer. You can also use this as an extra building plate to quickly continue with your next print. This PEI bed is suitable for the following Creality printers:

CR-10S PRO
CR-10S PRO V2
CR-10 V2
CR-10 V3

CR-X
CR-X Pro
Ender-3 Max

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Dimensions:	0.6 x 310 x 320 mm	Is liquid:	no
Our item no:	DAR01127

Order now, we can ship this today!

€38.50 (Incl. 23% VAT)
(€31.30 Excl. 23% VAT)

in stock

Creality 3D Creality Wifi Box 2.0 (With MicroSD Card)

Zoom in

3
2
1
0

Description Increase your 3D printing fun with the Creality WiFi box 2.0 from Creality 3D. By connecting to this you can control your 3D printer remotely in real time and monitor the status of your print via the Creality Cloud app. The box can be configured quickly and easily via Bluetooth. Finally, the printing history of the WiFi box can be uploaded to the cloud with just one click.

Specifications

Hazard class:	N/A	Material:	ABS
Brand:	Creality3D	Our item no:	DAR01274
Colour:	black	Tunnel code:	N/A
Standard bluetooth connection:	4.0	USB version:	USB 2.0
Current consumption:	2.4 A	Packing group:	NO
Network:	work ethernet WiFi	Is liquid:	no
Dimensions:	20 x 90 x 64 mm	Voltage:	5 v

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€43.50 (coming soon) (Incl. 23% VAT)
(€35.37 Excl. 23% VAT)

Creality 3D CR-X (Pro) / CR-10S (Pro) heat bed

Zoom in

Description Original replacement heated bed for Creality's CR-X (Pro) and CR-10S Pro (v2) 3D printers.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Length:	320 mm	Is liquid:	no
Power rating:	220 W	Voltage:	24 v
Our item no:	DME00141	Width:	310 mm
Thickness:	3 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

Creality 3D Upgraded red metal extruder clip for CR-10 Max

Zoom in

Description New version of the extruder clip/bracket for the CR-10 Max / CR-10S Pro 3D Printer.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Colour:	red	Is liquid:	no
Our item no:	DRO00063

€5.50 (Incl. 23% VAT)
(€4.47 Excl. 23% VAT)

5-7 day delivery

Creality 3D 12/24V hot bed module for the CR-10 series

Description Creality 3D Mosfet spare part

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Creality3D	Packing group:	NO
Our item no:	DRW00031	Is liquid:	no

This product is end of life.

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this today!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Our item no:	DGS00122	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50 (coming soon) (Incl. 23% VAT)
(€68.70 Excl. 23% VAT)

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	-	Packing group:	NO
Our item no:	DAR00265	Video promo:	Promotion video
Quantity:	4 Quantity	Is liquid:	no

Order now, we can ship this today!

€17.00 (Incl. 23% VAT)
(€13.82 Excl. 23% VAT)

in stock

Calex Smart WiFi smoke detector

Zoom in

Description This smart smoke detector from Calex ensures that you are informed of smoke in your home wherever you are. The powerful 85dB alarm tone warns you when you are at home. Are you gone out? Then you will receive a notification on your Calex app.

The smoke detector is completely wireless and can therefore be placed anywhere. The sensor works on batteries and lasts about 10 years. If the batteries are almost empty, the smoke alarm will let you know in good time. Connection is via 2.4GHz Wi-Fi. In addition, the sensor can be used with Google Assistant and Amazon Alexa.

With the Calex smart app, the smoke detector can also be programmed, and other smart devices can be set to respond when the smoke detector goes off. For example, you can turn off your 3D printer if it is connected to a smart plug.

Download the Calex Smart app
To use the product optimally, install the free Calex Smart app on your phone or tablet (suitable for Apple or Android). Don't want to use the app for a while? You can also operate the smoke detector with the Calex remote control.

Works with: Tuya, Google* and Alexa*
*Voice Assistant is required to use Google or Alexa.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Calex	Packing group:	NO
Colour:	white	Is liquid:	no
Diameter:	110 mm	Weight:	0.23 kg
Dimensions:	57.15 mm	WiFi:	2.4 GHz
Our item no:	LCA00437

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

Calex Smart mini indoor camera (1080p)

Zoom in

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Calex	Packing group:	NO
Colour:	white	Is liquid:	no
Dimensions:	110 x 53 x 32 mm	WiFi:	2.4 GHz
Our item no:	LCA00572

€41.50 (Incl. 23% VAT)
(€33.74 Excl. 23% VAT)

5-7 day delivery

WOOX smart indoor camera

Zoom in

Description Use this smart indoor camera from WOOX to keep an eye on your 3D printer, children, pets and belongings and to secure your home. The WOOX camera can be operated via WiFi with your smartphone or tablet.

In addition, the camera provides a clear image in Full HD 1080p resolution that can be viewed live or stored locally (or on a cloud service), and has a built-in microphone and speaker so that you can communicate with people nearby via your device. camera can communicate. It is also equipped with a motion sensor and infrared vision (up to 7 metres).

*A Voice Assistant is required to use Google or Alexa.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Woox	Packing group:	NO
Colour:	white	Is liquid:	no
Height:	116 mm	Voltage:	220 v
Our item no:	LWO00056	WiFi:	2.4 GHz

Works with


Tuya	Google*	Alexa*	Siri

€34.50 (Incl. 23% VAT)
(€28.05 Excl. 23% VAT)

5-7 day delivery

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Creality 3D CR-10S Pro

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Creality 3D CR-10S Pro