Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

3DLAC adhesive spray, 400ml

In stock €12.75

Heated bed clamps (4-pack)

Heated bed clamps (4-pack)

€6.75

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

€7.75

3D print post-processing set

3D print post-processing set

€9.75

Home
PLA
2.85mm PLA
Specialist PLA
2.85mm PLA glow in the dark

View 1.75mm PLA glow in the dark Filament

1 - 17 of 17

123-3D glow-in-the-dark green PLA filament 2.85mm, 1.1kg

123-3D glow-in-the-dark green PLA filament 2.85mm, 1.1kg DFP01057

4
3
2
1
0

Description Our green glow-in-the-dark 2.85mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Hazard class:	N/A	Our item no:	DFP01057
Amount:	1.1 kg	Roundness:	above 95 percent
Brand:	123-3D	Spool empty weight:	± 216 grams
Colour:	green	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Material:	PLA Glow in the dark	Tunnel code:	N/A
Max deviation:	+mn ± 0.05 mm	Packing group:	NO
Nozzle temp range:	195-235 °C	Is liquid:	no

Order now, we can ship this on Monday!

€24.50 10% discount:

€22.05 (Incl. 23% VAT)
(€17.93 Excl. 23% VAT)

in stock

REAL glow-in-the-dark PLA filament 2.85mm, 0.5kg

REAL glow-in-the-dark PLA filament 2.85mm, 0.5kg DFG02001 DFG02001

Description With this REAL glow-in-the-dark PLA filament (2.85mm) you can create 3D objects that radiate green light in the dark. This makes it possible to create projects with stunning light effects. The filament has the same printing properties as standard PLA. The material is harder and glossier than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Note: Glow in the dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Nozzle temp range:	190-215 °C
Amount:	0.5 kg	Our item no:	DFG02001
Brand:	REAL	Roundness:	above 95 percent
Colour:	green glow in the dark	Inner diameter:	Ø 5.5 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Spool width:	4.5 cm
Length:	56 m	Tunnel code:	N/A
Material:	PLA	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.50 (coming soon) (Incl. 23% VAT)
(€17.48 Excl. 23% VAT)

colorFabb glow in the dark green Glowfill filament 2.85mm, 0.75kg

colorFabb glow in the dark green Glowfill filament 2.85mm, 0.75kg DFP13159

Description Bring light into the darkness with this green colorFabb glow-in-the-dark filament. Glowfill has a beautiful white colour in daylight and changes to fluorescent green at night. The filament is combined with PLA/PHA and has a diameter of 2.85mm. We recommend a print temperature of 195 to 220°C and a print speed of 40 to 100mm/s.

Specifications

Hazard class:	N/A	Max deviation:	+mn ± 0.05 mm
Amount:	0.75 kg	Nozzle temp range:	195-220 °C
Brand:	colorFabb	Our item no:	DFP13159
Colour:	green glow in the dark	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	50-60 °C	Tunnel code:	N/A
Length:	32 m	Packing group:	NO
Material:	glow fill	Is liquid:	no

€42.50 (Incl. 23% VAT)
(€34.55 Excl. 23% VAT)

5-7 day delivery

REAL glow in the dark PLA filament 2.85mm, 0.5kg

REAL glow in the dark PLA filament 2.85mm, 0.5kg DFP02240

4
3
2
1
0

Description With this Real glow in the dark PLA filament (2.85mm) you can create 3D objects that emit green light in the dark. This makes projects with fun light effects possible. The filament has the same printing properties as standard PLA. The material is harder and has more gloss than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Please note: Glow in the dark filament has an abrasive effect in the nozzle, causing it to wear out faster. It is therefore recommended to replace the nozzle more often and/or to opt for a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Hazard class:	N/A	Our item no:	DFP02240
Amount:	0.5 kg	Roundness:	above 95 percent
Brand:	REAL	Inner diameter:	Ø 5.6 cm
Colour:	green	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Spool width:	7.0 cm
Heated bed temp:	0-55 °C	Tunnel code:	N/A
Material:	PLA Glow in the dark	Packing group:	NO
Max deviation:	+mn ± 0.10 mm	Is liquid:	no
Nozzle temp range:	190-215 °C

€29.50 (coming soon) (Incl. 23% VAT)
(€23.98 Excl. 23% VAT)

Transparent acrylic filament coil holder kit

123-3D Transparent acrylic filament coil holder kit DFR00002

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00002
Brand:	123-3D	Tunnel code:	N/A
Colour:	transparent	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this on Monday!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

3DLAC stick, 80ml

3DLAC stick, 80ml DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Hazard class:	N/A	Our item no:	DAR00884
Brand:	3DLAC	Tunnel code:	N/A
Diameter:	33 mm	Packing group:	NO
Download SDS:	Download	Is liquid:	no
Dimensions:	143 mm	Volume:	80ml

Order now, we can ship this on Monday!

€7.25 (Incl. 23% VAT)
(€5.89 Excl. 23% VAT)

in stock

Black acrylic filament coil holder kit

123-3D Black acrylic filament coil holder kit DFR00003

Description This black acrylic coil holder kit is ideal for setting up your filament spools if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Hazard class:	N/A	Our item no:	DFR00003
Brand:	123-3D	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	160 x 180 x 125 mm	Is liquid:	no

Order now, we can ship this on Monday!

€10.25 (Incl. 23% VAT)
(€8.33 Excl. 23% VAT)

in stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Max operating temp:	450 °C	Is liquid:	no
Power rating:	8 W	Voltage:	5 v
Our item no:	DGS00007	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this on Monday!

€34.75 (Incl. 23% VAT)
(€28.25 Excl. 23% VAT)

in stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool MODIFI3DPRO DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	MODIFI3D	Packing group:	NO
Cable length:	150 cm	Is liquid:	no
Max operating temp:	450 °C	Voltage:	24 v
Power rating:	30 W	Weight:	0.12 kg
Our item no:	DGS00090

Order now, we can ship this on Monday!

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

in stock

123-3D PLA pellets, 1kg

123-3D PLA pellets, 1kg DPL00000

Description PLA pellets can be used by enthusiastic DIY'ers to make PLA filament themselves. The pellets can also be used with a direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have yet been added.

Specifications

Hazard class:	N/A	Our item no:	DPL00000
Amount:	1 kg	Tunnel code:	N/A
Brand:	123-3D	Packing group:	NO
Colour:	neutral	Is liquid:	no
Material:	PLA

Order now, we can ship this on Monday!

€15.00 10% discount:

€13.50 (Incl. 23% VAT)
(€10.98 Excl. 23% VAT)

in stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Tesa	Packing group:	NO
Length:	50 m	Is liquid:	no
Our item no:	DVB00007	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT)
(€3.86 Excl. 23% VAT)

in stock

3DLAC adhesive spray, 400ml

3DLAC adhesive spray, 400ml DVB00005

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	2	Our item no:	DVB00005
Brand:	3DLAC	Tunnel code:	D
Diameter:	53 mm	Packing group:	NO
Safety datasheet:	Safety Information	Is liquid:	no
Dimensions:	300 mm	Volume:	400ml

Order now, we can ship this on Monday!

€12.75 (Incl. 23% VAT)
(€10.37 Excl. 23% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Hazard class:	3	Our item no:	DVB00018
Brand:	3DLAC	Tunnel code:	D/E
Diameter:	30 mm	Packing group:	II
Download SDS:	Download	Is liquid:	yes
Height:	150 mm	Volume:	100ml

Order now, we can ship this on Monday!

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml MO2016 DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Is liquid:	no
Tunnel code:	N/A	Volume:	50 ml
Type:	glue stick

Order now, we can ship this on Monday!

€18.25 (Incl. 23% VAT)
(€14.84 Excl. 23% VAT)

in stock

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml MO2018 DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Is liquid:	no
Tunnel code:	N/A	Volume:	120 ml
Type:	glue stick

Order now, we can ship this on Monday!

€46.50 (Incl. 23% VAT)
(€37.80 Excl. 23% VAT)

in stock

3DGloop PLA glue, 15ml

3DGloop PLA glue, 15ml GLP01PLA0015ST DSC00007

Description This 15ml PLA glue from 3DGloop has been specially developed for attaching 3D printed material. This very high quality American glue is extremely suitable for PLA filament. Although this glue is specially intended for attaching 3D prints, you can also glue your objects to a glass plate or mirror. For the strongest and most reliable filament adhesion, choose 3DGloop.

Specifications

Hazard class:	6.1	Packing group:	III
Brand:	3D Gloop	Is liquid:	yes
Safety datasheet:	Safety Information	Volume:	15 ml
Our item no:	DSC00007

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€20.50 (coming soon) (Incl. 23% VAT)
(€16.67 Excl. 23% VAT)

3DGloop PLA glue, 75ml

3DGloop PLA glue, 75ml GLP01PLA0075BT DSC00008

Description The 75ml PLA glue from 3DGloop has been specially developed for attaching 3D printed material. This very high quality American glue is extremely suitable for PLA filament. Although this glue is specially intended for attaching 3D prints, you can also fix your object inseparably to a glass plate or mirror. For the strongest and most reliable filament adhesion, choose 3DGloop.

Specifications

Hazard class:	6.1	Packing group:	III
Brand:	3D Gloop	Is liquid:	yes
Safety datasheet:	Safety Information	Volume:	60 ml
Our item no:	DSC00008

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€35.50 (coming soon) (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

© 2024 - 123-3d.ie