Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Order a black PLA bundle!

In stock €117.00

Heated bed clamps (4-pack)

Heated bed clamps (4-pack)

€6.75

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

Hot end copper cleaning brush

Hot end copper cleaning brush

€3.95

Bondtech BMG mirrored extruder, 1.75mm

Bondtech BMG mirrored extruder, 1.75mm EXT-BMG-LH DBO00005

Description The mirrored Bondtech BMG has a dual drive for trouble-free material feeding. This extruder gives you the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The BMG extruder is a universal solution suitable for both Bowden and direct drive applications. It also has a built-in fitting for the E3D hotend and fits on NEMA17 stepper motors. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech BMG is a compact powerhouse with hardened steel drive wheels, using an internal gear ratio of 3:1. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a overwhelming result.

In addition, it is possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. This extruder is designed for 1.75mm filament, but has been tested to tolerances between 1.5mm and 2.0mm to ensure high performance. Furthermore, thanks to the 'quick-release' lever, changing material is very easy.

E-step setting: 415 (1.75mm) steps/mm

Data sheet (PDF)
Installation video (YouTube)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00005

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

5-7 day delivery

Bondtech BMG® Internals Set for HextrudORT

Bondtech BMG® Internals Set for HextrudORT EXT-KIT-85 DBO00084

Description This genuine Bondtech parts kit is precision CNC machined and suitable for powerful filament feeding. You use the parts in combination with the HextrudORT. The super sharp teeth give you maximum grip on the filament. Thanks to its extremely high wear resistance, this set is ideal for processing abrasive filaments.

The packaging contains:

1.75 / 5.0mm Hardened Steel Bondtech drive sprocket set, with primary wheel (5mm inner diameter) and secondary wheel with two needle bearings, M3 x 2 setscrew and 3 x 20mm axle
main shaft assembly
thumbscrew mounting
4mm plug-in collar
2 ball bearings of 5mm x 8mm x 2.5mm

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00084	Is liquid:	no

€37.50 (Incl. 23% VAT)
(€30.49 Excl. 23% VAT)

5-7 day delivery

Bondtech BMG extruder, 1.75mm

Bondtech BMG extruder, 1.75mm EXT-BMG DBO00004

Description This Bondtech BMG has a double drive for trouble-free material feeding. This extruder gives you the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The BMG extruder is a universal solution suitable for both Bowden and direct drive applications. It also has a built-in fitting for the E3D hotend and fits on NEMA17 stepper motors. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech BMG is a compact powerhouse with hardened steel drive wheels, using an internal gear ratio of 3:1. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

In addition, it is possible to work with special filaments, such as nylon, carbon and flexible filament, thanks to the high reliability of the extruder. This extruder is designed for 1.75mm filament, but has been tested to tolerances between 1.5mm and 2.0mm to ensure high performance. Thanks to the 'Quick-release' lever, changing material is very easy.

E-step setting: 415 (1.75mm) steps/mm

Data sheet (PDF)
Installation video (YouTube)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00004	Weight:	0.135 kg

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

5-7 day delivery

Bondtech BMG-M mirrored extruder, 1.75mm

Bondtech BMG-M mirrored extruder, 1.75mm EXT-BMG-M-LH DBO00009

Description This mirrored Bondtech BMG-M is a compact powerhouse with hardened steel drive wheels and an internal gear ratio of 3:1. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The BMG extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

It is possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy. This extruder is designed for 1.75mm filament, but has been tested to tolerances between 1.5mm and 2.0mm to ensure high performance.

The Bondtech BMG-M standard is optimised for the following hotends:

The integrated torque lock system is strong and changing nozzles is child's play. Mounting the hotend is also easy thanks to the two bolts.

E-step setting: 415 (1.75mm) steps/mm

Data sheet (PDF)
Installation video (YouTube)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00009

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

5-7 day delivery

Bondtech BMG-M extruder, 1.75mm

Bondtech BMG-M extruder, 1.75mm BMGM DBO00008

Description The Bondtech BMG-M is a compact powerhouse with hardened steel drive wheels and internal gear ratio of 3:1. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a crushing result.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The BMG extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

It is possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy. This extruder is designed for 1.75mm filament, but has been tested to tolerances between 1.5mm and 2.0mm to ensure high performance.

The Bondtech BMG-M standard is optimised for the following hotends:

The integrated torque lock system is strong and changing nozzles is child's play. Mounting the hotend is also easy thanks to the two bolts.

E-step setting: 415 (1.75mm) steps/mm

Data sheet (PDF)
Installation video (YouTube)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00008

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

5-7 day delivery

Bondtech BMG-X2 extruder, 18mm

Bondtech BMG-X2 extruder, 18mm EXT-BMGX2-1 DBO00006

Description The Bondtech BMG-X2 (18mm) combines high performance and high resolutions with a lightweight solution and compact design. The dual-drive ensures trouble-free material feeding. The BMG-X2 has been specially developed for the E3D Chimera and Cyclops hotends with a CC of 18.00mm. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting: 415 (1.75mm) steps/mm

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00006

€149.00 (Incl. 23% VAT)
(€121.14 Excl. 23% VAT)

5-7 day delivery

Bondtech BMG-X2 extruder, 20mm

Bondtech BMG-X2 extruder, 20mm EXT-BMGX2-2 DBO00007

Description The Bondtech BMG-X2 (20mm) combines high performance and high resolutions with a lightweight solution and compact design. The dual drive ensures trouble-free material feeding. The BMG-X2 has been specially developed for the E3D Chimera and Cyclops hotends with a CC of 20mm. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting: 415 (1.75mm) steps/mm

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00007

€149.00 (Incl. 23% VAT)
(€121.14 Excl. 23% VAT)

5-7 day delivery

Bondtech Copperhead Silicone sock

Bondtech Copperhead Silicone sock 14299 DAR00814

Description This Bondtech silicone sock is custom made for Copperhead hotends with a Copperhead hot block. The sock prevents heat leakage to your newly printed model and thus guarantees an optimal curing process. In addition, the insulation contributes to a stable temperature of the hot block.

The sock is made of high-quality silicone material and has a high temperature load, up to approximately 290°C. Thanks to the air spaces on the inside, the sock has an excellent insulating effect. It also provides good tear resistance. The sock is easy to install thanks to finger grips and a spring-loaded attachment to the hot block.

Specifications

Hazard class:	N/A	Our item no:	DAR00814
Brand:	Bondtech	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Material:	silicon	Is liquid:	no

€14.00 (Incl. 23% VAT)
(€11.38 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX Copperhead adapter set

Bondtech DDX Copperhead adapter set 10079-52-T DBO00024

Description

Install your Copperhead hotend in a DDX upgrade kit with this Bondtech DDX adapter set.

The package contains:

1x 10079-51 SLS Copperhead adapter for DDX
1x DDX thermistor adapter

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00024	Is liquid:	no

€14.00 (Incl. 23% VAT)
(€11.38 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX Mosquito adapter set

Bondtech DDX Mosquito adapter set 10079-51-T DBO00023

Description

Install your Mosquito hotend in a DDX upgrade kit with this Bondtech DDX adapter set.

The package contains:

x 1 10079-51 SLS Mosquito adapter for DDX
x 1 DDX thermistor adapter

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00023	Is liquid:	no

€13.50 (Incl. 23% VAT)
(€10.98 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V2 Micro Swiss All-Metal adapter

Bondtech DDX V2 Micro Swiss All-Metal adapter 10079-53 DBO00060

Description

Install your Micro Swiss All-Metal hot end in a DDX V2 upgrade kit with this Bondtech DDX adapter set.

The package contains:

1x 10079-53 SLS Micro Swiss adapter for DDX V2

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	nylon	Video instructions:	Instructional video
Our item no:	DBO00060	Is liquid:	no

€10.00 (Incl. 23% VAT)
(€8.13 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V2 Rear Housing SLS

Bondtech DDX V2 Rear Housing SLS 10079-2v2 DBO00036

Description Mount your Micro Swiss hot end in a DDX V1 set with this Bondtech DDX V2 Rear Housing SLS. The Micro Swiss hot end and DDX adapter are not included.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00036	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.00 (coming soon) (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

Bondtech LGX Lite ALU Mount Plate for Mosquito

Bondtech LGX Lite ALU Mount Plate for Mosquito 15300-K DBO00099

Description Use this holder to attach your Mosquito or Mosquito Magnum hotend directly to the LGX Lite.
Made of aluminum and blasted.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	aluminium	Is liquid:	no
Our item no:	DBO00099

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€14.75 (coming soon) (Incl. 23% VAT)
(€11.99 Excl. 23% VAT)

Bondtech DDX Creality CR-10 V2/V3 adapter set

Bondtech DDX Creality CR-10 V2/V3 adapter set EXT-KIT-77-C-V3 DBO00053

Description

Use this Bondtech DDX adapter set to install your DDX upgrade kit. It is compatible with the following Creality 3D printers:

The package contains:

1x 10079-5-T DDX 5015 fan cover.
1x 10079-65 DDX mounting plate for the CR-10 V2.
1x 10079-45 DDX Bowden mounting.
- (supplied with a tapered thread to better match the standard metal threads)
1x 10079-80 DDX Z-Sensor plate for the CR-10 V2.
7x M3 square nut.
2x M3x25mm screw.
2x M3x20mm screw.
2x M3x8mm screw.

Note: to use the DDX V3 on the CR-10 V2 or V3 you need to use a hotend upgrade. One of the following hotends could be used:

Specifications

Hazard class:	N/A	Our item no:	DBO00053
Brand:	Bondtech	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Material:	nylon	Is liquid:	no

€69.75 (Incl. 23% VAT)
(€56.71 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Lite Arrow for Creality

Bondtech LGX Lite Arrow for Creality EXT-KIT-90 DAR00826

Description The Bondtech LGX Lite Arrow Creality converts Bowden's compatible printers to direct extruder. The housing is easy to remove and you can easily adjust the z-position of the fan. The upgrade kit is compatible with all standard hotends and cooling fans. Use the LGX Lite Arrow for your Creality CR-6 SE, CR-6 Max or CR-10 Smart 3D printer. This kit includes an extruder mounting kit and a housing kit.

1x LGX Lite extruder mounting kit:

1x PA12 Extruder Mount
1x PA12 hotend mount
4x M3 x 6 button head screw
2x M3 x 10 button head screw
2x M3 x 8 button head screw
1x M3 x 30 screw
1x M3 square nut
1x Capricorn cutting device
1x 70mm Capricorn tube

1x LGX Lite Arrow housing set:

1x PA12 front housing
1x PA12 left wing
1x PA12 right wing
1x PA12 top cover
1x PA12 fan shroud
1x PA12 (breakout board/cables) cover
2x M3 x 8 button head screw
1x M3 x 16 screw
2x M3 x 20 MC6S screw
3x M3 square nut

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	nylon PA12	Is liquid:	no
Our item no:	DAR00826	Weight:	0.065 kg

€59.50 (Incl. 23% VAT)
(€48.37 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Lite PA12 Mount for MGN12 Carriages

Bondtech LGX Lite PA12 Mount for MGN12 Carriages 15305 DBO00107

Description Use this holder to install the LGX Lite on an MGN12C or MGN12H cradle. The holder is laser-sintered in Polyamide 12 and blasted. The protective wax layer reduces sensitivity to moisture and grease.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	polyamide	Is liquid:	no
Our item no:	DBO00107

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.95 (coming soon) (Incl. 23% VAT)
(€11.34 Excl. 23% VAT)

Bondtech LGX Lite PA12 Mount for MGN7 Carriages

Bondtech LGX Lite PA12 Mount for MGN7 Carriages 15303 DBO00106

Description Use this holder to install the LGX Lite on an MGN7C or MGN7H cradle. The holder is laser-sintered in Polyamide 12 and blasted. The protective wax layer reduces sensitivity to moisture and grease.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	polyamide	Is liquid:	no
Our item no:	DBO00106

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.95 (coming soon) (Incl. 23% VAT)
(€11.34 Excl. 23% VAT)

Bondtech LGX Lite PA12 Mount for MGN9 Carriages

Bondtech LGX Lite PA12 Mount for MGN9 Carriages 15304 DBO00105

Description Use this holder to install the LGX Lite on an MGN9C or MGN9H cradle. The holder is laser-sintered in Polyamide 12 and blasted. The protective wax layer reduces sensitivity to moisture and grease.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	polyamide	Is liquid:	no
Our item no:	DBO00105

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.95 (coming soon) (Incl. 23% VAT)
(€11.34 Excl. 23% VAT)

Bondtech LGX® Lite Extruder (no motor)

Bondtech LGX® Lite Extruder (no motor) EXT-LGX-LITE-T DBO00097

Description The Bondtech LGX Lite is a filament feeder that uses Bondtech's new dual drive technology with larger drive gears. The extruder is only suitable for 1.75mm filament.

Most important features:

• Compact and lightweight filament pad
• Maintenance window for easy cleaning
• Large drive wheels for better filament grip
• Preload lever with 3 presets

Specifications

Hazard class:	N/A	Our item no:	DBO00097
Brand:	Bondtech	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Mounting hole:	M3	Is liquid:	no

€104.50 (Incl. 23% VAT)
(€84.96 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V3 Creality CR-10(S) Pro & Max adapter set

Bondtech DDX V3 Creality CR-10(S) Pro & Max adapter set EXT-KIT-77-B-V3 DBO00052

Description

Use this Bondtech DDX adapter set to install your DDX upgrade kit. It is compatible with the following Creality 3D printers:

The package contains:

1x 10079-4 PA12 fan cover
1x 10079-44 PA12 Bowden adapter
1x M3x10mm button head screw
1x M3x5mm square nut

Note: This kit is required to install both a DDX and a DDX V3 upgrade kit
Note: Your printer requires a 40mm x 40mm x 20mm radial fan.
Note: The CR-10S PRO V2 and CR-10 MAX require an alternative bracket to mount the BL touch.

Specifications

Hazard class:	N/A	Our item no:	DBO00052
Brand:	Bondtech	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Material:	nylon	Is liquid:	no

€47.50 (Incl. 23% VAT)
(€38.62 Excl. 23% VAT)

5-7 day delivery

Bondtech HeatLink ferrule

Bondtech HeatLink ferrule 14062-6 DBO00070

Description The Bondtech Ferrule Heatlink is an adapter between the thermistor or heater heatlink and the printer. This specific heatlink has a 50mm bridging cable and a molex-fit 3.0 male connector. On the other side is a ferrule connector.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00070	Is liquid:	no
Tunnel code:	N/A

€5.50 (Incl. 23% VAT)
(€4.47 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Lite PA12 Mount Set for Copperhead (groove mount)

Bondtech LGX Lite PA12 Mount Set for Copperhead (groove mount) 15302 DBO00104

Description Use this holder to attach your Copperhead Groove Mount hotend directly to the LGX Lite. The holder is laser-sintered in Polyamide 12 and blasted. The protective wax layer reduces sensitivity to moisture and grease.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	polyamide	Is liquid:	no
Our item no:	DBO00104

€15.75 (Incl. 23% VAT)
(€12.80 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V3 Creality Ender & CR-10 adapter set

Bondtech DDX V3 Creality Ender & CR-10 adapter set EXT-KIT-77-A-V3 DBO00051

Description

Use this Bondtech DDX adapter set to install your DDX upgrade kit.
The package contains:

1x 10079-32 SLS fan cover
1x CE SLS hot-end adapter

It is compatible with the following Creality 3D printers:

Ender-3 / Ender-3 Pro
Ender-5 / Ender-5 Pro
CR-10 / CR-10S / CR-10S4 / CR-10S5

Note: Your printer requires a 40mm x 40mm x 10mm radial fan.

Specifications

Hazard class:	N/A	Our item no:	DBO00051
Brand:	Bondtech	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Material:	nylon	Is liquid:	no

€53.50 (Incl. 23% VAT)
(€43.50 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V3 Creality Ender & CR-10(S) direct drive extruder

Bondtech DDX V3 Creality Ender & CR-10(S) direct drive extruder EXT-KIT-77-01-V3 DBO00049

Description This Bondtech DDX Extruder is suitable for 3D printers of the Creality Ender and CR-10(S). This copy is a very powerful dual drive extruder based on the BMG Bondtech Mini Geared. It gives you all kinds of options to, for example, print with different materials, use wider nozzles and create super detailed 3D prints. The housing provides effective cooling of the hot end. Thanks to the transmission ratio of 3:1 you can achieve high resolution prints with narrow nozzles or high flow prints with larger nozzles. The kit replaces the original Bowden extruder of your 3D printer. Tools are required to assemble the kit (Allen and screwdrivers).

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00049	Is liquid:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€169.50 (coming soon) (Incl. 23% VAT)
(€137.80 Excl. 23% VAT)

Bondtech LGX Shortcut Copperhead for Prusa MK3S

Bondtech LGX Shortcut Copperhead for Prusa MK3S EXT-KIT-88 DBO00094

Description X-Carriage is required (15122)
item: DBO00090

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Max temp:	450 °C	Weight:	0.219 kg
Our item no:	DBO00094

€232.00 (Incl. 23% VAT)
(€188.62 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V3 Creality direct drive extruder

Bondtech DDX V3 Creality direct drive extruder EXT-KIT-77-V3 DBO00054

Description This extruder has a double drive and therefore delivers high-quality prints. The extruder is suitable for Creality 3D printers and is compatible with hotends of almost any Creality model, but can also be upgraded to a Copperhead or Mosquito hotend. With this extruder you have more options for materials, higher flow and wider nozzles and thinner layers to achieve a higher print quality.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00054	Is liquid:	no

€109.50 (Incl. 23% VAT)
(€89.02 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V3 CR-10 V2 & V3 mounting plate

Bondtech DDX V3 CR-10 V2 & V3 mounting plate 10079-65 DBO00047

Description The DDX V3 mounting plate is an easy to install spare part made from Nylon (PA12).

Compatible with the following printers:
	●	Creality 3D CR-10 V2	●	Creality 3D CR-10 V3

Specifications

Hazard class:	N/A	Our item no:	DBO00047
Brand:	Bondtech	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Material:	nylon	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Shortcut Copperhead Printhead

Bondtech LGX Shortcut Copperhead Printhead EXT-LGX-PH DBO00087

Description

The Bondtech LGX Shortcut Copperhead printhead consists of a hotend and an extruder.

Hotend
With the hotend you can print all kinds of filaments at temperatures up to 450°C. With the LGX Shortcut Copperhead hotend (previous name: LGX For Flexibles Set) you can process all kinds of 1.75mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 27mm shorter than the standard Copperhead screw-on hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in various ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This pack contains:

Copperhead™ LGX™ Heatbreak
Copperhead™ Hot Block
Black anodized LGX™ aluminum cooling basin
Air-cooled black anodized LGX™ aluminum heat sink
Air-cooled LGX™ Cold Block mounting hardware
Bondtech M6x1x7.5 coated brass mouthpiece 0.4mm (V6)
Bag of silver-based thermal paste

The hotblock supplied with this product is compatible with the RepRap nozzle standard.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: The nozzle is not included.

Extruder
The LGX Large Gears eXtruder is Bondtech's first 1.75mm filament feeder with the new Dual Drive technology. This item is designed to be compact, lightweight and symmetrical for better performance and compatibility. You install and clean it easily. The filament preload lever ensures consistent results. Thanks to the larger drive gears, you have more grip on the filament.

The multifunctional interface connection allows you to quickly change tools or applications. The housing is professionally 3D printed with nylon, for maximum strength, precision and higher temperature resistance. In the context of sustainability, no bleaching agents and coatings have been used.

This extruder comes with:

LGX® input
Custom Nema17 25mm pancake stepper motor
Bowden interface plug (incl. threaded metal push-fit)
Direct Drive Interface Plug (for Slice Engineering hotends)
2mm Allen key
Information brochure

The supplied studs can be used to replace the stepper motor screws and as additional mounting points. They have an M3 thread with a depth of 4mm.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00087	Weight:	0.27 kg

€179.50 (Incl. 23% VAT)
(€145.93 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Shortcut Copperhead Accessories For MK3S

Bondtech LGX Shortcut Copperhead Accessories For MK3S 15121 DBO00092

Description These Bondtech LGX Shortcut Copperhead accessories fit the LGX Shortcut Copperhead Hotend and are suitable for the Prusa MK3S.

The accessory set contains:

LGX PA12 holder
LGX PA12 Peanut container
LGX PA12 fan cover
LGX PA12 filament sensor box
Mounting accessories
Stepper motor cable

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	nylon PA12	Is liquid:	no
Our item no:	DBO00092

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V3 PA12 fan shroud for CR-10(S) Pro & Max

Bondtech DDX V3 PA12 fan shroud for CR-10(S) Pro & Max 10079-4-T DBO00046

Description The Bondtech DDX V3 PA12 fan shroud provides improved air distribution at the nozzle.

Compatible with the following printers:
	●	Creality 3D CR-10S Pro	●	Creality 3D CR-10S Pro V2
	●	Creality 3D CR-10 Max

Specifications

Hazard class:	N/A	Our item no:	DBO00046
Brand:	Bondtech	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Material:	nylon	Is liquid:	no

€30.50 (Incl. 23% VAT)
(€24.80 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Shortcut Mosquito for Prusa MK3S

Bondtech LGX Shortcut Mosquito for Prusa MK3S EXT-KIT-87 DBO00093

Description X-Carriage is required (15122)
item: DBO00090

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Max operating temp:	70 °C	Is liquid:	no
Our item no:	DBO00093

€307.50 (Incl. 23% VAT)
(€250.00 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V3 PA12 fan shroud for Ender & CR-10(S)

Bondtech DDX V3 PA12 fan shroud for Ender & CR-10(S) 10079-3-T DBO00045

Description The Bondtech DDX V3 PA12 fan shroud provides improved air distribution at the nozzle.

Compatible with the following printers:
	●	Ender-3	●	Ender-6
	●	Ender-3 v2	●	CR-10
	●	Ender-3 Pro	●	CR-10 Mini
	●	Ender-5	●	CR-10S
	●	Ender-5 Pro	●	CR-10 S4
	●	Ender-5 Plus	●	CR-10 S5

Specifications

Hazard class:	N/A	Our item no:	DBO00045
Brand:	Bondtech	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Material:	nylon	Is liquid:	no

€30.50 (Incl. 23% VAT)
(€24.80 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Shortcut Copperhead Hotend

Bondtech LGX Shortcut Copperhead Hotend EXT-LGX-H DBO00086

Description With the Bondtech LGX Shortcut Copperhead hotend you can print all kinds of filaments at temperatures of up to 450°C. This product is suitable for use with the LGX Extruder (not included). With the LGX Shortcut Copperhead hotend (former name: LGX For Flexibles Set) you can process all kinds of 1.75 mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 27mm shorter than the standard Copperhead screw-on hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in several ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This package contains:

a Copperhead™ LGX™ Heatbreak
a Copperhead™ Hot Block
a black anodized LGX™ aluminum cooling pool
an air-cooled black anodized LGX™ aluminum heat sink
an air-cooled LGX™ Cold Block mounting hardware
a Bondtech M6x1x7.5 coated brass nozzle 0.4 mm (V6)
a sachet of silver-based thermal paste

The heater block supplied with this product is compatible with the RepRap nozzle standard.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: the nozzle is not included.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00086	Weight:	0.056 kg

€79.50 (Incl. 23% VAT)
(€64.63 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Shortcut Mosquito Printhead

Bondtech LGX Shortcut Mosquito Printhead EXT-LGX-SM-PH DBO00089

Description

The Bondtech LGX Shortcut Mosquito printhead consists of a hotend and an extruder.

Hotend
With the Bondtech LGX Shortcut Mosquito hotend you can print all kinds of filaments at temperatures up to 450°C. With the LGX Shortcut Mosquito hotend you can process all kinds of 1.75mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 23mm shorter than the standard Mosquito hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in various ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This pack contains:

Mosquito Hotend (without Heatsink)
Black anodized LGX™ aluminum cooling basin
Air-cooled black anodized LGX™ aluminum heat sink
Air-cooled LGX™ Cold Block mounting hardware
Bondtech M6x1x7.5 coated brass mouthpiece 0.4 mm (V6)
Bag of silver-based thermal paste

The hotblock supplied with this product is compatible with the RepRap nozzle standard. You can change the nozzle with one hand.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: The nozzle is not included.

Extruder

The LGX Large Gears eXtruder is Bondtech's first 1.75mm filament feeder with the new Dual Drive technology. This item is designed to be compact, lightweight and symmetrical for better performance and compatibility. You install and clean it easily. The filament preload lever ensures consistent results. Thanks to the larger drive gears, you have more grip on the filament.

The multifunctional interface connection allows you to quickly change tools or applications. The housing is professionally 3D printed with nylon, for maximum strength, precision and higher temperature resistance. In the context of sustainability, no bleaching agents and coatings have been used.

This extruder comes with:

LGX® input
Custom Nema17 25mm pancake stepper motor
Bowden interface plug (incl. threaded metal push-fit)
Direct Drive Interface Plug (for Slice Engineering hotends)
2mm Allen key
Information brochure

The supplied studs can be used to replace the stepper motor screws and as additional mounting points. They have an M3 thread with a depth of 4mm.

Specifications

Hazard class:	N/A	Our item no:	DBO00089
Brand:	Bondtech	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Max temp:	450 °C	Is liquid:	no

€251.50 (Incl. 23% VAT)
(€204.47 Excl. 23% VAT)

5-7 day delivery

Bondtech DDX V3 PH1 for Creality CR-10 (S) Pro & Max

Bondtech DDX V3 PH1 for Creality CR-10 (S) Pro & Max EXT-KIT-77-02-V3 DBO00050

Description Bondtech's DDX V3 PH1 replaces the original Bowden extruder with a direct drive extruder setup. The model is suitable for Creality 3D printers and is compatible with hot ends of almost every Creality model. You can also upgrade the hotend to Copperhead or Mosquito.

With this powerful 1.75mm Dual Drive extruder you achieve a higher print quality and you have more options, such as thinner layers, higher resolution prints with small nozzles, high flow prints with larger nozzles and a wider choice of materials.

Further highlights:

Effective hot end cooling
3:1 gear ratio
Housing parts made of polyamide (PA12) with SLS technology for maximum strength and precision

Please Note: A Bondtech DDX Adapter Kit is required to use this product.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00050

€147.50 (Incl. 23% VAT)
(€119.92 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Shortcut X-carriage

Bondtech LGX Shortcut X-carriage 15122 DBO00090

Description You need this Bondtech LGX Shortcut X carriage to install the "Bondtech LGX Shortcut Copperhead for Prusa MK3S" and "Bondtech LGX Shortcut Mosquito for Prusa MK3S" upgrade kits. The X-carriage reduces the distance between the nozzle and the x-axis.

This part is professionally 3D printed with nylon for maximum strength, precision and higher temperature resistance. The operating temperature limit for the stepper motor is max. 70°C and the maximum operating temperature is 90°C. The X-carriage itself can withstand temperatures up to 100°C. For durability, this part is supplied unpainted. It has the natural colour of the material and a wax coating.

The LGX Shortcut X-carriage for MK3S(+) comes with:

SLS X-carriage front
SLS X-carriage rear
5 x M3 x 10 screws
5 x M3 square nut
1 x M3 nut
2 x 100mm black cable ties

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	nylon	Is liquid:	no
Our item no:	DBO00090

€39.50 (Incl. 23% VAT)
(€32.11 Excl. 23% VAT)

5-7 day delivery

Bondtech drivegear kit, 1.75mm (5mm shaft)

Bondtech drivegear kit, 1.75mm (5mm shaft) EXT-KIT33 DBO00057

Description The drivegear kit consists of 2 gears, bearings and a shaft. This set is suitable for 1.75mm filament and has a 5mm shaft.

By using a little bit of grease between the gears, the whole is more wear-resistant for a longer life.

Specifications

Hazard class:	N/A	Our item no:	DBO00057
Brand:	Bondtech	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Material:	steel	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Shortcut Mosquito Accessories For MK3S

Bondtech LGX Shortcut Mosquito Accessories For MK3S 15120 DBO00091

Description These Bondtech LGX Shortcut Mosquito Accessories fit the LGX Shortcut Mosquito Hotend and are suitable for the Prusa MK3S.

The accessory set contains:

LGX PA12 holder
LGX PA12 Peanut container
LGX PA12 fan cover
LGX PA12 filament sensor box
mounting accessories
stepper motor cable

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	nylon PA12	Is liquid:	no
Our item no:	DBO00091	Weight:	0.09 kg

€51.50 (Incl. 23% VAT)
(€41.87 Excl. 23% VAT)

5-7 day delivery

Bondtech drivegear kit, 1.75mm (8mm shaft)

Bondtech drivegear kit, 1.75mm (8mm shaft) EXT-KIT31 DBO00055

Description The drivegear kit consists of 2 gears, bearings and a shaft. This set is suitable for 1.75mm filament and has an 8mm shaft.

By using a little bit of grease between the gears, the whole is more wear-resistant for a longer life.

Specifications

Hazard class:	N/A	Our item no:	DBO00055
Brand:	Bondtech	Tunnel code:	N/A
Filament diameter:	1.75 mm	Packing group:	NO
Material:	steel	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

Bondtech drivegear kit, 2.85mm (8mm shaft)

Bondtech drivegear kit, 2.85mm (8mm shaft) EXT-KIT32 DBO00056

Description The drivegear kit consists of 2 gears, bearings and a shaft. This set is suitable for 2.85mm filament and has an 8mm shaft.

By using a little bit of grease between the gears, the whole is more wear-resistant for a longer life.

Specifications

Hazard class:	N/A	Our item no:	DBO00056
Brand:	Bondtech	Tunnel code:	N/A
Filament diameter:	2.85 mm	Packing group:	NO
Material:	steel	Is liquid:	no

€31.50 (Incl. 23% VAT)
(€25.61 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Shortcut Mosquito Hotend

Bondtech LGX Shortcut Mosquito Hotend EXT-LGX-SM-H DBO00088

Description

With the Bondtech LGX Shortcut Mosquito hotend you can print all kinds of filaments at temperatures up to 450°C. This product is suitable for use with the LGX Extruder. With the LGX Shortcut Mosquito hotend you can process all kinds of 1.75mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 23mm shorter than the standard Mosquito hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in various ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This pack contains:

a Mosquito Hotend (without Heatsink)
a black anodized LGX™ aluminum cooling basin
an air-cooled black anodized LGX™ aluminum heat sink
an air-cooled LGX™ Cold Block mounting hardware
a Bondtech M6x1x7.5 coated brass mouthpiece 0.4 mm (V6)
a bag of silver-based thermal paste

The hotblock supplied with this product is compatible with the RepRap nozzle standard. You can change the nozzle with one hand.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: The nozzle is not included.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00088	Weight:	0.061 kg

€149.50 (Incl. 23% VAT)
(€121.54 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX® Lite Front Plate BeeHive

Bondtech LGX® Lite Front Plate BeeHive 10087-1B DBO00100

Description Spare part for the Bondtech LGX® Lite. Honeycomb pattern front plate made of grey polyamide without colouring. Features a protective wax coating and the LGX® Lite Bondtech sticker.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Dimensions:	20 x 50 x 100 mm	Is liquid:	no
Our item no:	DBO00100	Weight:	0.02 kg

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX® Lite Front Plate Cubes

Bondtech LGX® Lite Front Plate Cubes 10087-1C DBO00101

Description Spare part for the Bondtech LGX® Lite. Cube pattern front plate made of grey polyamide without colouring. Features a protective wax coating and the LGX® Lite Bondtech sticker.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Dimensions:	20 x 50 x 100 mm	Is liquid:	no
Our item no:	DBO00101	Weight:	0.02 kg

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX® Lite Front Plate Desert

Bondtech LGX® Lite Front Plate Desert 10087-1D DBO00102

Description Spare part for the Bondtech LGX® Lite. Desert pattern front plate in grey polyamide without coloring. Features a protective wax coating and the LGX® Lite Bondtech sticker.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Dimensions:	20 x 50 x 100 mm	Is liquid:	no
Our item no:	DBO00102	Weight:	0.02 kg

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX® Lite Front Plate Annular

Bondtech LGX® Lite Front Plate Annular 10087-1 DBO00103

Description Spare part for the Bondtech LGX® Lite. Ring pattern front plate made of grey polyamide without colouring. Features a protective wax layer LGX® Lite Bondtech sticker.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Dimensions:	20 x 50 x 100 mm	Is liquid:	no
Our item no:	DBO00103	Weight:	0.02 kg

€7.75 (Incl. 23% VAT)
(€6.30 Excl. 23% VAT)

5-7 day delivery

Bondtech extruder upgrade kit for Creality3D CR-10(S)/Ender-3

Bondtech extruder upgrade kit for Creality3D CR-10(S)/Ender-3 EXT-KIT-48 DBO00014

Description This Bondtech extruder upgrade kit for the Creality CR-10(S) and Ender-3 replaces the original extruder. This set can also be used on the CR-10S printer from Creality, only the mounting bracket has no attachment for the filament detection sensor of the CR-10S printer.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting: 415 (1.75mm) steps/mm

Reverse the direction of rotation, refer to the installation manual.

Instruction manual
Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00014

€97.50 (Incl. 23% VAT)
(€79.27 Excl. 23% VAT)

5-7 day delivery

Bondtech extruder upgrade kit for Creality3D CR-10S

Bondtech extruder upgrade kit for Creality3D CR-10S EXT-KIT-49 DBO00010

Description The Bondtech extruder upgrade kit for the Creality CR-10S (and other printers that use the same type of mounting plate) replaces the original extruder.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting : 415 (1.75mm) steps/mm

Reverse the direction of rotation, refer to the installation manual.

Instruction manual
Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00010

€97.50 (Incl. 23% VAT)
(€79.27 Excl. 23% VAT)

5-7 day delivery

Bondtech extruder upgrade kit for Creality3D CR-10 V2

Bondtech extruder upgrade kit for Creality3D CR-10 V2 EXT-KIT-75 DBO00017

Bondtech extruder upgrade kit for Creality3D CR-10 V2 With the Bondtech extruder upgrade kit for the Creality CR-10 V2 (and other printers that use the same type of mounting plate) you can now print even faster with both rigid and flexible filament types, without filament jamming!

The unique dual drive ensures trouble-free material feeding, high performance, greater reliability and a higher degree of precision. The filament will no longer jam or show signs of wear thanks to the minimal space of 0.1mm and the shortened PTFE tube between the extruder and the filament sensor.

This upgrade kit contains the latest version of the Bondtech Mini Geared extruder, fitted with a brass motor gear, Pneufit coupling and black housing. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

To use this upgrade kit, you must make the following adjustments:

E-steps : 415 (1.75mm) steps/mm
Gear ratio : 3:1
Slicer Machine Settings: Maximum Z-height to 390mm

Note: Use the original motor during assembly, no separate motor is included.

Instruction manual
Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00017	Is liquid:	no

€95.50 (Incl. 23% VAT)
(€77.64 Excl. 23% VAT)

5-7 day delivery

Bondtech extruder upgrade kit for Prusa I3 MK2 - MK2S

Bondtech extruder upgrade kit for Prusa I3 MK2 - MK2S EXT-KIT-62 DBO00012

Description This Bondtech extruder upgrade kit is suitable for the Prusa I3 MK2 and the MK2S and already has gears. This kit includes parts to convert the extruder to a 3:1 gear ratio, which provides greater precision, higher resolution, optimised geometry for the heatsink and many other improvements. In addition, the weight is reduced, which reduces vibrations and ghosting.

This set comes with a 25mm pancake stepper, with a torque of 18 Ncm for a lightweight yet powerful extrusion and a new cable for connecting the motor. Use the part cooling fan (50mm x 15mm) of the current printer, it is not included with this item.

The E steps should be updated to 415 for MK2, MK2s and MK2.5. Follow Prusa/Bondtech guide for E steps calibration for MK2s and MK2.5.

The weight is reduced by 121 grams.

Installation files
Firmware (MK3S 3.7.0.)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00012	Is liquid:	no

€123.50 (Incl. 23% VAT)
(€100.41 Excl. 23% VAT)

5-7 day delivery

Bondtech extruder upgrade kit for Prusa I3 MK2.5 - MK3

Bondtech extruder upgrade kit for Prusa I3 MK2.5 - MK3 DBO00011

Description The Bondtech extruder upgrade kit is suitable for the Prusa I3 MK2.5 and the MK3 and already have gears. This kit includes parts to convert the extruder to a 3:1 gear ratio, which provides greater precision, higher resolution, optimised geometry for the heatsink and many other improvements. In addition, the weight is reduced, which reduces vibrations and ghosting.

This set comes with a 25mm pancake stepper, with a torque of 18 Ncm for a lightweight yet powerful extrusion and a new cable for connecting the motor. Use the part cooling fan (50mm x 15mm) and original (40mm x 40mm x 10mm) of the current printer, these are not included in this article, as well as the filament sensor.

The E steps should be updated to 415 for MK2, MK2s and MK2.5. Follow Prusa/Bondtech guide for E steps calibration for MK2.5 and MK3.

The weight is reduced by 121 grams.

Installation files
Firmware (MK3S 3.7.0.)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00011	Is liquid:	no

€117.50 (Incl. 23% VAT)
(€95.53 Excl. 23% VAT)

5-7 day delivery

Bondtech extruder upgrade kit for Prusa I3 MK2.5S - MK3S

Bondtech extruder upgrade kit for Prusa I3 MK2.5S - MK3S EXT-KIT-68 DBO00015

Description The Bondtech extruder upgrade kit is suitable for the Prusa I3 MK2.5S and the MK3S and already has gears. This kit includes parts to convert the extruder to a 3:1 gear ratio, which provides greater precision, higher resolution, optimised geometry for the heatsink and many other improvements.

The E steps should be updated to 415 for the MK2.5S. For MK3 it should be 830 because it uses 32 bit microstepping. Also, the Z_MAX_POS 205 must be adjusted. The correct firmware can be found at the bottom of this page.

NOTE: This upgrade kit requires additional parts (X-Carriage Kit). You can download the STLs and 3D print them.

Installation files
MK2.5S - STL Front
MK3S - STL Front
MK2.5s / MK3S - STL Rear
Firmware (MK3S 3.7.2.)

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Bondtech	Is liquid:	no
Our item no:	DBO00015	Weight:	0.292 kg
Tunnel code:	N/A

€119.75 (Incl. 23% VAT)
(€97.36 Excl. 23% VAT)

5-7 day delivery

Bondtech heat-break kit for Prusa Mini

Bondtech heat-break kit for Prusa Mini 15067 DBO00019

Description Give your Prusa Mini an upgrade and prevent heat-creep issues with this Bondtech heat-break kit.

This part is made of stainless steel and specially developed to prevent heat-creep issues with the Prusa Mini. In addition, the length of the PTFE tube has been adjusted in such a way that no accumulation of filament can occur between the tube and the heat-break.

This upgrade kit contains the following items:

1x 32 x 5.48mm stainless steel heat break
1x 34.5mm 2/4 Beveled PTFE tubing

When mounting these parts in the heat sink, we recommend the use of thermal paste for better thermal transfer.

View the extensive manual with simple step-by-step explanations here.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00019	Is liquid:	no

Order now, we can ship this tomorrow!

€17.00 (Incl. 23% VAT)
(€13.82 Excl. 23% VAT)

in stock

Bondtech heatsink

Bondtech heatsink 13100 DBO00048

Description This heatsink can be used to cool various parts. This part is easy to attach thanks to the self-adhesive back.

Due to the size of 40 x 40 x 11mm, this heatsink fits well on nema17 stepper motors.

Specifications

Hazard class:	N/A	Our item no:	DBO00048
Brand:	Bondtech	Tunnel code:	N/A
Colour:	black	Packing group:	NO
Dimensions:	11 x 40 x 40 mm	Is liquid:	no
Material:	aluminium	Weight:	18 grams

Order now, we can ship this tomorrow!

€3.25 (Incl. 23% VAT)
(€2.64 Excl. 23% VAT)

in stock

Bondtech HeatLink Thermistor 300C

Bondtech HeatLink Thermistor 300C 14055 DBO00062

Description With this Heatlink Thermistor you are able to read temperatures up to 300 degrees Celsius.

The Thermistor can be used in combination with the following two heat links:

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Cable length:	150 cm	Video instructions:	Instructional video
Max temp:	300 °C	Is liquid:	no
Our item no:	DBO00062

€15.00 (Incl. 23% VAT)
(€12.20 Excl. 23% VAT)

5-7 day delivery

Bondtech HeatLink JST XH-2 with lock

Bondtech HeatLink JST XH-2 with lock 14062-1 DBO00065

Description The Bondtech Heatlink JST XH-2 is an adapter between the thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a type JST XH-2 as a special connection. This connection is provided with a lock clamp.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00065	Is liquid:	no
Tunnel code:	N/A

€5.50 (Incl. 23% VAT)
(€4.47 Excl. 23% VAT)

5-7 day delivery

Bondtech HeatLink JST XHP-2

Bondtech HeatLink JST XHP-2 14062-2 DBO00066

Description The Bondtech Heatlink JST XHP-2 is an adapter between the thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a JST XHP-2 type as a special connection.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00066	Is liquid:	no
Tunnel code:	N/A

€5.50 (Incl. 23% VAT)
(€4.47 Excl. 23% VAT)

5-7 day delivery

Bondtech HeatLink JST VHR-2N

Bondtech HeatLink JST VHR-2N 14062-3 DBO00067

Description The Bondtech Heatlink JST VHR-2N is an adapter between the thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a JST VHR-2N type as a special connection.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00067	Is liquid:	no
Tunnel code:	N/A

€5.50 (Incl. 23% VAT)
(€4.47 Excl. 23% VAT)

5-7 day delivery

Bondtech HeatLink JST SMP-02V-BC

Bondtech HeatLink JST SMP-02V-BC 14062-4 DBO00068

Description The Bondtech Heatlink JST SMP-02V-BC is an adapter between the thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a JST-SMP-02V-BC type as a special connection.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00068	Is liquid:	no
Tunnel code:	N/A

€5.50 (Incl. 23% VAT)
(€4.47 Excl. 23% VAT)

5-7 day delivery

Bondtech HeatLink Molex MX-50-57-9002

Bondtech HeatLink Molex MX-50-57-9002 14062-5 DBO00069

Description The Bondtech Heatlink JST MX-50-57-9002 is an adapter between thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a Molex type MX-50-57-9002 as a special connection.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00069	Is liquid:	no
Tunnel code:	N/A

€5.50 (Incl. 23% VAT)
(€4.47 Excl. 23% VAT)

5-7 day delivery

Bondtech IFS extruder for Prusa mini

Bondtech IFS extruder for Prusa mini EXT-KIT-82 DBO00058

Description Upgrade your Prusa Mini/+ with this new filament sensor. The IFS extruder is designed to fit perfectly into the original Prusa Mini housing. This Bondtech IFS extruder is the successor to the Bondtech Dual Drive Extrusion Upgrade Kit (EXT-KIT-76).

The print head can be used with or without the filament sensor. The hardened steel Dual Drive gears give you more choice of materials to work with. This also allows you to work with abrasive materials, where this would otherwise wear out the gears of the original feeder. Another advantage of this IFS extruder is the adjustable tension. The thumb screw tensioner allows you to fine-tune the pressure the drive gears exert on the filament to suit your preferences or the type of material. Material changes can be carried out quickly and easily by activating the handy Quick-Release lever.

This upgrade kit includes:

x 1 Bondtech IFS extruder for the Prusa Mini
x 1 IFS magnet holder (PA12)
x 1 IFS lever (PA12)
x 1 extruder plug (HT-PLA)
x 3 Black Nylon Cable Ties
x 4 M3 x 35 + 1 x M3 x 12 black oxide steel screws
x 1 Brass Motor Gear
x 1 Thumbscrew Mount

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Material:	nylon	Weight:	0.114 kg
Our item no:	DBO00058

€76.50 (Incl. 23% VAT)
(€62.20 Excl. 23% VAT)

5-7 day delivery

Bondtech Prusa mini extruder upgrade to IFS

Bondtech Prusa mini extruder upgrade to IFS EXT-KIT-83 DBO00059

Description With these Bondtech parts you give the extruder of your Prusa Mini an FSI upgrade. Use the Bondtech Prusa Mini Extruder Upgrade Kit to make the original Prusa Mini extruder compatible with IFS. The kit allows the new filament sensor for Prusa Mini to be mounted in the Prusa Mini extruder.

The front housing of the IFS extruder for Prusa Mini contains a plug to hold the steel ball of the filament sensor. Allows the extruder to be used without a filament sensor. Do you want to use the IFS extruder with the Prusa filament sensor? Then remove the connector and follow the instructions to install the necessary accessories.

This upgrade kit includes:

x 1 10076-3 front housing (PA12)
x 1 10076-4 IFS magnet holder (PA12)
x 1 10076-5 IFS handle (PA12)
x 1 15112 IFS extruder plug (HT-PLA)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Material:	nylon	Is liquid:	no
Our item no:	DBO00059	Weight:	0.103 kg

€35.50 (Incl. 23% VAT)
(€28.86 Excl. 23% VAT)

5-7 day delivery

Bondtech Prusa i3 MK3S+ / MK3S / MK2.5S Mosquito

Bondtech Prusa i3 MK3S+ / MK3S / MK2.5S Mosquito BTE-EXT-KIT-69 DBO00061

Description A lightweight, high-resolution extruder upgrade for the Prusa i3 MK3S and MK2.55 3D printers.
The design is optimized to use Mosquito (Magnum) hotends.

Most important features:

• Adapted to Prusa's new filament sensor and Mosquito hotends;
• Includes Bondtech BMG extruder with 3:1 gearing ratio;
• Optimized geometry for cooling the heat sink;
• Attachment for PINDA sensor included;
• Less moving weight to reduce vibration and ghosting;
• Professional SLS 3D printed housing and 3 other key parts.

Specifications

Hazard class:	N/A	Packing group:	NO
Brand:	Bondtech	Is liquid:	no
Our item no:	DBO00061	Weight:	0.378 kg
Tunnel code:	N/A

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€127.50 (coming soon) (Incl. 23% VAT)
(€103.66 Excl. 23% VAT)

Bondtech QR mirrored extruder including motor and cable PC2510, 1.75mm

Bondtech QR mirrored extruder including motor and cable PC2510, 1.75mm EXT_UNI_175_LH DBO00001

Description The mirrored Bondtech QR has a dual drive for hassle-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a crushing result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 476.5 (1.75mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00001

€169.00 (Incl. 23% VAT)
(€137.40 Excl. 23% VAT)

5-7 day delivery

Bondtech QR extruder including motor and cable, 1.75mm

Bondtech QR extruder including motor and cable, 1.75mm EXT_UNI_175 DBO00000

Description This Bondtech QR has a dual drive for trouble-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or create fast prints with large nozzles, you can always expect a crushing result. It is also possible to work with special filaments, such as nylon, carbon and flexible filament, thanks to the high reliability of the extruder. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 476.5 (1.75mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00000

€169.00 (Incl. 23% VAT)
(€137.40 Excl. 23% VAT)

5-7 day delivery

Bondtech QR mirrored extruder including motor and cable PC2510, 2.85/3.0mm

Bondtech QR mirrored extruder including motor and cable PC2510, 2.85/3.0mm EXT_UNI_30_LH DBO00003

Description The mirrored Bondtech QR has a dual drive for hassle-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a crushing result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 492.45 (2.85mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	2.85 mm	Is liquid:	no
Our item no:	DBO00003

€169.00 (Incl. 23% VAT)
(€137.40 Excl. 23% VAT)

5-7 day delivery

Bondtech QR extruder including motor and cable PC2510, 2.85/3.0mm

Bondtech QR extruder including motor and cable PC2510, 2.85/3.0mm EXT_UNI_30 DBO00002

Description The Bondtech QR has a dual drive for trouble-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect an overwhelming result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. Furthermore, thanks to the 'quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 492.45 (2.85mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	2.85 mm	Is liquid:	no
Our item no:	DBO00002

€169.00 (Incl. 23% VAT)
(€137.40 Excl. 23% VAT)

5-7 day delivery

Bondtech QR-M extruder, 1.75mm

Bondtech QR-M extruder, 1.75mm EXT-QRM-175 DBO00041

Description

This Bondtech QR-M extruder is a compact powerhouse with hardened steel drive wheels and a 5:1 gear ratio. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

Thanks to the double drive, material is fed in without any problems and you are assured of good performance, reliability and high precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments, such as nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change materials. The extruder is designed for 1.75mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 476.5 (1.75mm) steps/mm

Please note the extruder is supplied without the mount.

Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00041

€163.50 (Incl. 23% VAT)
(€132.93 Excl. 23% VAT)

5-7 day delivery

Bondtech QR-M extruder, 2.85mm

Bondtech QR-M extruder, 2.85mm EXT-QRM-30 DBO00043

Description

This Bondtech QR-M is a compact powerhouse with hardened steel drive wheels and a gear ratio of 5:1. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

Thanks to the dual drive, material is fed smoothly and you are assured of high performance, reliability and precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments, such as nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change material. The extruder is designed for 2.85mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 492.45 (2.85mm) steps/mm

Please note the extruder is supplied without the mount.

Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	2.85 mm	Is liquid:	no
Our item no:	DBO00043

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€163.50 (coming soon) (Incl. 23% VAT)
(€132.93 Excl. 23% VAT)

Bondtech QR-M mirrored extruder, 1.75mm

Bondtech QR-M mirrored extruder, 1.75mm EXT-QRM-175-LH DBO00042

Description

This compact powerhouse has hardened steel drive wheels and a 5:1 gear ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a crushing result.

Thanks to the dual drive, material is fed smoothly and you are assured of high performance, reliability and precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments. Experiment with nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change material. The extruder is designed for 1.75mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 476.5 (1.75mm) steps/mm

Please note the extruder is supplied without the mounting mount.

Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00042

€163.50 (Incl. 23% VAT)
(€132.93 Excl. 23% VAT)

5-7 day delivery

Bondtech QR-M mirrored extruder, 2.85mm

Bondtech QR-M mirrored extruder, 2.85mm EXT-QRM-30-LH DBO00044

Description

This compact powerhouse has hardened steel drive wheels and a 5:1 gear ratio. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

Thanks to the dual drive, material is fed smoothly and you are assured of high performance, reliability and precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments, such as nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change material. The extruder is designed for 2.85mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 492.45 (2.85mm) steps/mm

Please note the extruder is supplied without the mount.

Data sheet (PDF)

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	2.85 mm	Is liquid:	no
Our item no:	DBO00044

€163.50 (Incl. 23% VAT)
(€132.93 Excl. 23% VAT)

5-7 day delivery

Bondtech SLS X-Carriage kit for Prusa i3 MK3S

Bondtech SLS X-Carriage kit for Prusa i3 MK3S 15058 DBO00016

Description The Bondtech SLS X-Carriage kit is required to install the Bondtech upgrade kit for the Prusa i3 MK3S. This SLS version is suitable for users who print with closed chambers to reach a temperature of 100°C. The FDM version, made of HT-PLA, would deform in such circumstances.

This kit contains:

SLS X-Carriage front
SLS X-Carriage rear
5x M3x10 screws
5x M3 square nut
1x M3 nut

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00016	Is liquid:	no

€45.50 (Incl. 23% VAT)
(€36.99 Excl. 23% VAT)

5-7 day delivery

Bondtech HeatLink heater catridge 24V, 50W

Bondtech HeatLink heater catridge 24V, 50W 14056 DBO00063

Description The Bondtech 24V 50W Heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 24v 50W Heater is compatible with most 3D printer Hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Power rating:	50 W	Is liquid:	no
Our item no:	DBO00063	Voltage:	24 v

Order now, we can ship this tomorrow!

€14.00 (Incl. 23% VAT)
(€11.38 Excl. 23% VAT)

in stock

Bondtech HeatLink heater cartridge 12V, 50W

Bondtech HeatLink heater cartridge 12V, 50W 14057 DBO00064

Description The Bondtech 12V 50W Heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 12v 50W Heater is compatible with most 3D printer Hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Power rating:	50 W	Is liquid:	no
Our item no:	DBO00064	Voltage:	12 v

€14.00 (Incl. 23% VAT)
(€11.38 Excl. 23% VAT)

5-7 day delivery

Bondtech Copperhead for Ender/CR-10(S) DDX PH2

Bondtech Copperhead for Ender/CR-10(S) DDX PH2 14265 DBO00096

Description Upgrade your Creality hotend with a real Copperhead heat Break and Hot Block to stage 2 of the DDX Direct Drive eXtruder. Turn your Creality hotend into a full metal hotend and prevent the deformation of PTFE at temperatures above 220°C. This Copperhead hotend upgrade for DDX PHase 2 on Creality uses the standard heat sink.

The standard nozzles do not fit on this hotend. You must upgrade the nozzles to the RepRap standard: M6x1x7.5×12.5.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00096

€75.50 (Incl. 23% VAT)
(€61.38 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.60mm

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.60mm 600-C-CHT-MOS-175-60 DBO00071

Description

This brass Bondtech CHT M6 nozzle has a nickel coating and is highly resistant to corrosion. The nozzle also produces less friction so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts and flows faster.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00071
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.80mm

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.80mm 600-C-CHT-MOS-175-80 DBO00072

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00072
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.00mm

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.00mm 600-C-CHT-MOS-175-100 DBO00073

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.0mm and is suitable for filament with a diameter of 175 mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00073
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.40mm

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.40mm 600-C-CHT-MOS-175-140 DBO00074

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00074
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.4 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.80mm

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.80mm 600-C-CHT-MOS-175-180 DBO00075

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.8mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00075
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.8 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.40mm

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.40mm 600-C-CHT-MOS-175-40 DBO00076

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00076
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

Order now, we can ship this tomorrow!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle M6, 1.75 x 0.50mm

Bondtech CHT® coated brass nozzle M6, 1.75 x 0.50mm 600-C-CHT-MOS-175-50 DBO00095

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.5mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00095
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.5 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.4mm (M6×1×5×13)

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.4mm (M6×1×5×13) 600-C-CHT-MK8-175-40 DBO00078

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00078
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no
Nozzle type:	MK8

Order now, we can ship this tomorrow!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.6mm (M6×1×5×13)

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.6mm (M6×1×5×13) 600-C-CHT-MK8-175-60 DBO00079

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00079
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no
Nozzle type:	MK8

Order now, we can ship this tomorrow!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.8mm (M6×1×5×13)

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.8mm (M6×1×5×13) 600-C-CHT-MK8-175-80 DBO00080

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00080
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no
Nozzle type:	MK8

Order now, we can ship this tomorrow!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.0mm (M6×1×5×13)

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.0mm (M6×1×5×13) 600-C-CHT-MK8-175-100 DBO00081

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00081
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no
Nozzle type:	MK8

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.00 (coming soon) (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.4mm (M6×1×5×13)

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.4mm (M6×1×5×13) 600-C-CHT-MK8-175-140 DBO00082

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00082
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.4 mm	Is liquid:	no
Nozzle type:	MK8

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.8mm (M6×1×5×13)

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.8mm (M6×1×5×13) 600-C-CHT-MK8-175-180 DBO00083

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1. mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00083
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.8 mm	Is liquid:	no
Nozzle type:	MK8

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.00 (coming soon) (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm (5-pack)

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm (5-pack) 600-C-CHT-VOL-175-T DAR00875

Description The Bondtech CHT Volcano nozzle has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved. This is a 5-pack.

Specifications

Hazard class:	N/A	Our item no:	DAR00875
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no

€113.00 (Incl. 23% VAT)
(€91.87 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.40mm

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.40mm DAR00851

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00851
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.60mm

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.60mm DAR00852

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.60mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00852
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.80mm

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.80mm DAR00853

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.80mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00853
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.00mm

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.00mm DAR00854

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00854
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.20mm

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.20mm DAR00855

Description

The Bondtech CHT Volcano nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.20mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00855
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.2 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm 600-A-CHT-VOL-175-40 DAR00946

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00946
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.4 mm

Order now, we can ship this tomorrow!

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

in stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm 600-A-CHT-VOL-175-60 DAR00947

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00947
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.6 mm

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm 600-A-CHT-VOL-175-80 DAR00948

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00948
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.8 mm

Order now, we can ship this tomorrow!

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

in stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm 600-A-CHT-VOL-175-10 DAR00949

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00949
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	1 mm

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack)

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack) 600-A-CHT-VOL-175-T DAR00959

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Quantity:	4
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Our item no:	DAR00959

€193.00 (Incl. 23% VAT)
(€156.91 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.40mm

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.40mm 600-A-CHT-MOS-175-40 DAR00950

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00950
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.4 mm

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.60mm

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.60mm 600-A-CHT-MOS-175-60 DAR00951

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00951
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.6 mm

Order now, we can ship this tomorrow!

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

in stock

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.80mm

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.80mm 600-A-CHT-MOS-175-80 DAR00952

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00952
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.8 mm

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 1.00mm

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 1.00mm 600-A-CHT-MOS-175-10 DAR00953

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00953
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	1 mm

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm (4-pack)

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm (4-pack) 600-A-CHT-MOS-175-T DAR00958

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on the hardware used, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Hazard class:	N/A	Quantity:	4
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Our item no:	DAR00958

€183.00 (Incl. 23% VAT)
(€148.78 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.40mm

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.40mm 600-A-CHT-MK8-175-40 DAR00954

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Nozzle type:	MK8
Brand:	Bondtech	Our item no:	DAR00954
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal MK8 coated nozzle 1.75mm x 0.60mm

Bondtech CHT® BiMetal MK8 coated nozzle 1.75mm x 0.60mm 600-A-CHT-MK8-175-60 DAR00955

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Nozzle type:	MK8
Brand:	Bondtech	Our item no:	DAR00955
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.80mm

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.80mm 600-A-CHT-MK8-175-80 DAR00956

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Nozzle type:	MK8
Brand:	Bondtech	Our item no:	DAR00956
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 1.00mm

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 1.00mm 600-A-CHT-MK8-175-10 DAR00957

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Nozzle type:	MK8
Brand:	Bondtech	Our item no:	DAR00957
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no

€48.00 (Incl. 23% VAT)
(€39.02 Excl. 23% VAT)

5-7 day delivery

Bondtech CHT® BiMetal coated brass nozzle MK8, 1.75mm (4-pack)

Bondtech CHT® BiMetal coated brass nozzle MK8, 1.75mm (4-pack) 600-A-CHT-MK8-175-T DAR00960

Description The Bondtech CHT® BiMetal MK8 Coated Nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your MK8 heat block by 25 to 65%. This depends on the hardware used, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
bq Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
Creality Ender 2
Creality Ender 3 Pro
Creality Ender 5
Creality CR-20 Pro
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Craft bot family
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DAR00960
Brand:	Bondtech	Quantity:	4
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	copper	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle type:	MK8	Is liquid:	no

€183.00 (Incl. 23% VAT)
(€148.78 Excl. 23% VAT)

5-7 day delivery

Bondtech Raise3D E2 Upgrade Bundle

Bondtech Raise3D E2 Upgrade Bundle 14320 DAR00978

Description Would you like to get the most out of your 3D printer? The Bondtech Raise3D E2 Upgrade Bundle makes it possible. You can prevent common problems such as under extrusion and clogging with this Slice Engineering upgrade. The result: higher resolution and less downtime and failed prints. You also waste less filament. It makes printing easier and more fun.

The set consists of the following products:

2 x Copperhead™ Hotend - Standard - G2
2 x Vanadium™ Nozzle - 0.4mm
1 x Boron Nitride Paste
2 x Custom Industrial Heater - 30W 24V / 170mm / JST XHP-2

The bundle is suitable for the following printers:

Raise3D E2
Raise3D E2CF

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	24 v
Our item no:	DAR00978

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€274.00 (coming soon) (Incl. 23% VAT)
(€222.76 Excl. 23% VAT)

Bondtech Raise3D Pro2 Upgrade Bundle

Bondtech Raise3D Pro2 Upgrade Bundle 14321 DAR00979

Description Would you like to get the most out of your 3D printer? The Bondtech Raise3D Pro2 Upgrade Bundle makes it possible. You can prevent common problems such as under extrusion and clogging with this Slice Engineering upgrade. The result: higher resolution and less downtime and failed prints. You also waste less filament. It makes printing easier and more fun.

The set consists of the following products:

2 x Copperhead™ Hotend – Standard – G2
2 x Vanadium™ Nozzle – 0.4mm
1 x Boron Nitride Paste 2x Custom Industrial Heater – 50W 24V / 300mm / bare leads
2 x Custom Thermocouple – Type K / 285mm / Bare Leads

The bundle is suitable for the following printers:

Raise3D Pro2
Raise3D Pro2 Plus

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Nozzle diameter:	0.4 mm	Voltage:	24 v
Our item no:	DAR00979

€327.00 (Incl. 23% VAT)
(€265.85 Excl. 23% VAT)

5-7 day delivery

Bondtech FDM X-Carriage kit for Prusa i3 MK3S

Bondtech FDM X-Carriage kit for Prusa i3 MK3S 15051 DBO00018

Description The Bondtech FDM X-Carriage kit is required to install the Bondtech upgrade kit for the Prusa i3 MK3S. This FDM version is suitable for use at room temperature.

This kit contains:

FDM X-Carriage front
FDM X-Carriage rear
5x M3x10 screws
5x M3 square nut
1x M3 nut

The SLS X-Carrige higher temperature kit can be found here.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00018	Is liquid:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€10.50 (coming soon) (Incl. 23% VAT)
(€8.54 Excl. 23% VAT)

Bondtech LGX Lite Arrow Upgrade Kit for Creality

Bondtech LGX Lite Arrow Upgrade Kit for Creality EXT-KIT-95 DAR01148

Description This Bondtech LGX Lite Arrow Upgrade Kit can be used perfectly on the Creality CR-6 SE, CR-6 Max and the CR-10 Smart. This upgrade kit can convert all compatible printers from a Bowden extruder to a direct extruder and is compatible with stock hotends and fans. The housing is lightweight, well insulated and can be easily removed for hotend and extruder maintenance. The Z position of the fan can also be adjusted. The plastic parts of the LGX Lite Arrow for the Creality and the LGX Lite eXtruder are made of PA12 GF Polyamide 12 Glass Filled, which makes them stronger.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DAR01148	Is liquid:	no
Stepper size:	Nema 14	Weight:	0.143 kg

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€145.25 (coming soon) (Incl. 23% VAT)
(€118.09 Excl. 23% VAT)

Bondtech LGX Lite eXtruder (with motor)

Bondtech LGX Lite eXtruder (with motor) EXT-LGX-LITE DAR01149

Description The lightweight Bondtech LGX Lite eXtruder is based on the LGX® Large Gears eXtruder and uses Bondtech's new Dual Drive technology. This extruder comes with a better housing, improved heat resistance and of course the classic Bondtech look. The larger drive wheels provide better grip on the filament. The maintenance windows ensure that maintenance can be carried out more easily. In addition, the LGX Lite comes with a lever with which you can regulate the filament tension. This lever has 3 settings: open, tight and flexible.

There are several mounting holes, making it easy and flexible to attach. The housing parts are professionally printed with polyamide 12 for maximum strength, precision and higher temperature resistance. The LGX Lite eXtruder comes with a protective layer of wax, so that it is less sensitive to moisture and grease, but remains fully functional.

This extruder only supports 1.75mm filament

Specifications

Brand:	Bondtech	Our item no:	DAR01149
Cable length:	100 cm	Stepper size:	Nema 14
Filament diameter:	1.75 mm	Weight:	0.141 kg
Dimensions:	44 x 44.65 x 39.1 mm

This product is end of life.

Bondtech DDX Thermistor Adapter, 3mm

Bondtech DDX Thermistor Adapter, 3mm 11035A DAR01432

Description Bondtech DDX thermistor adapter to use the original Creality Thermistor in a Copperhead or Mosquito heater block.

Suitable for the Phase 2 and Phase 3 versions.

Specifications

Brand:

Bondtech

Our item no:

DAR01432

€4.95 (Incl. 23% VAT)
(€4.02 Excl. 23% VAT)

5-7 day delivery

Bondtech LGX Lite V2 extruder

Bondtech LGX Lite V2 extruder EXT01LGX41003 DBO00108

7
6
5
4
3
2
1
0

Description The LGX Lite V2 extruder from Bondtech uses a new dual drive technology that uses larger drive gears. These larger drive gears provide a better grip on the filament and are easy to maintain due to the maintenance windows. The filament tension lever comes with 3 settings: open, tight and flexible. The LGX Lite V2 is a lightweight extruder with improved heat resistance, tighter tolerances and a micro form factor. The extra mounting holes ensure easy mounting with multiple options. The extruder is compatible with round Nema14 stepper motors and has the classic, black Bondtech appearance.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Our item no:	DBO00108	Is liquid:	no

€87.50 (Incl. 23% VAT)
(€71.14 Excl. 23% VAT)

5-7 day delivery

© 2024 - 123-3d.ie