Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Bondtech HeatLink heater cartridge 12V, 50W

Description The Bondtech 12V 50W Heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 12v 50W Heater is compatible with most 3D printer Hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Power rating:	50 W	Is liquid:	no
Our item no:	DBO00064	Voltage:	12 v

€14.00 (Incl. 23% VAT)
(€11.38 Excl. 23% VAT)

7-10 days

Bondtech Copperhead for Ender/CR-10(S) DDX PH2

Zoom in

Description Upgrade your Creality hotend with a real Copperhead heat Break and Hot Block to stage 2 of the DDX Direct Drive eXtruder. Turn your Creality hotend into a full metal hotend and prevent the deformation of PTFE at temperatures above 220°C. This Copperhead hotend upgrade for DDX PHase 2 on Creality uses the standard heat sink.

The standard nozzles do not fit on this hotend. You must upgrade the nozzles to the RepRap standard: M6x1x7.5×12.5.

Specifications

Hazard class:	N/A	Tunnel code:	N/A
Brand:	Bondtech	Packing group:	NO
Filament diameter:	1.75 mm	Is liquid:	no
Our item no:	DBO00096

€75.50 (Incl. 23% VAT)
(€61.38 Excl. 23% VAT)

7-10 days

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.60mm

Zoom in

Description

This brass Bondtech CHT M6 nozzle has a nickel coating and is highly resistant to corrosion. The nozzle also produces less friction so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts and flows faster.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00071
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no

Order now, we can ship this today!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00072
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

7-10 days

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.00mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.0mm and is suitable for filament with a diameter of 175 mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00073
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

7-10 days

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00074
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.4 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

7-10 days

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.8mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00075
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.8 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

7-10 days

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00076
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

Order now, we can ship this today!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle M6, 1.75 x 0.50mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.5mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DBO00095
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.5 mm	Is liquid:	no

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

7-10 days

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00078
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no
Nozzle type:	MK8

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

7-10 days

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.6mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00079
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no
Nozzle type:	MK8

Order now, we can ship this today!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00080
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no
Nozzle type:	MK8

Order now, we can ship this today!

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

in stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.0mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00081
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no
Nozzle type:	MK8

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.00 (coming soon) (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00082
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.4 mm	Is liquid:	no
Nozzle type:	MK8

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

7-10 days

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1. mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Hazard class:	N/A	Our item no:	DBO00083
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.8 mm	Is liquid:	no
Nozzle type:	MK8

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.00 (coming soon) (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm (5-pack)

Zoom in

Description The Bondtech CHT Volcano nozzle has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved. This is a 5-pack.

Specifications

Hazard class:	N/A	Our item no:	DAR00875
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	brass	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no

€113.00 (Incl. 23% VAT)
(€91.87 Excl. 23% VAT)

7-10 days

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.40mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00851
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.4 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

7-10 days

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.60mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.60mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00852
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.6 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

7-10 days

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.80mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.80mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00853
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	0.8 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

7-10 days

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.00mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00854
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

7-10 days

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.20mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.20mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Hazard class:	N/A	Our item no:	DAR00855
Brand:	Bondtech	Quantity:	1
Filament diameter:	1.75 mm	Screwthread type:	M6
Material:	brass	Tunnel code:	N/A
Nozzle coating:	nickel plated	Packing group:	NO
Nozzle diameter:	1.2 mm	Is liquid:	no

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

7-10 days

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00946
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.4 mm

Order now, we can ship this today!

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

in stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00947
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.6 mm

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

7-10 days

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Hazard class:	N/A	Our item no:	DAR00948
Brand:	Bondtech	Screwthread type:	M6
Filament diameter:	1.75 mm	Tunnel code:	N/A
Material:	copper	Packing group:	NO
Nozzle coating:	nickel plated	Is liquid:	no
Nozzle diameter:	0.8 mm

Order now, we can ship this today!

€55.00 (Incl. 23% VAT)
(€44.72 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Bondtech

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Bondtech